Was ist die Webseite?

https://www.facebook.com/108409961033474/

felgenfetisch, Lucerne (2026)

10/06/2026

🔥🔥FOR SALE🔥🔥
Advan TC-4
Front & rear: 8,5x18" ET44
Lug pattern: 5x100
Center bore: 63.1mm
Price: CHF 1500 / EUR 1650

These flow formed, ultra light Yokohama Advan Racing TC-4 come in sparkling Black Gun Metal. With 8,5" all around, they are a perfect fit for many all wheel drive Subarus, such as the Impreza or WRX or the rear wheel drive Subaru BRZ, its sister model the Toyota GT86 and the successor, the GR86. The wheels have "GTR" concave faces, which look incredibly nice and give each car a stanced look.

3 wheels are in good condition and show a few minor nicks on the spokes as well as one single spot of curb rash on one outer rim. One wheel is brand new and never mounted on a car. An extra replacement spoke decal is included.

🇨🇭 A Swiss certificate can be organized for CHF 100.- extra

04/06/2026

🔥🔥FOR SALE🔥🔥
Work Amkread, 3 piece wheel
Front: 9x18" ET21 (R-Disk)
Rear: 9x18" ET21 (R-Disk)
Bolt pattern: 5x114.3
Center bore: 73.3mm
Price: CHF 1950 / EUR 2150

This VERY rare set of beautiful, reverse lipped Work Amkread, freshly arrived from Japan. The wheels share the same hardware with Work Rezax2 and come with the iconic Work RFF (Round Rim) reverse lips. The wheels are true 3 piece design in sandwich configuration. They come in R-Disk, which allows them to be mounted over large brakes, such as the Sumitomo brakes from Nissan Skylines, Silvias and Z-models.

Amkread is a Japanese tuning group, still active to this day. The wheels were mostly likely produced by Work for this specific group under a limited production run in the late 1990s. This set for sale is from 1997.

The wheels show signs of age: The outer lips are in still very very shiny condition, but show some water marks and stone chips. The bolts show some corrosion and should be replaced or polished again. The center shows some minor scratches and paint peeling around the spokes, but are in very well shape overall. All original Amkread spoke decals are present and in very good shape. The genuine center caps are all included, which is extremely rare for such old wheels. The caps are in good shape, but also show some corrosion spots.

Incl. 4 original Work Amkread Center Caps

🇨🇭 Swiss homologation certificate available

26/04/2026

🔥🔥FOR SALE🔥🔥
Enkei Racing S, 2 piece wheel
Front & rear: 7x16 ET32
Lug pattern: 4x100
Center bore: 70.1mm
Price: CHF 1500 / EUR 1650

This very rare set of 16", PCD 4x100 JDM Enkei Racing S comes straight from Japan. The 16" are very unusual, most sets that you can find are 15" or even smaller. Very light and perfect specs for a Civic EK4, EG6 and other Japanese youngtimers. Heck, they even look good on European cars! But for the maximum effect and JDM street credibility, someone should throw these babies on an old JDM car and turn up the Eurobeat!

These Enkei Racing S are painted in metallic gunmetal. The inner barrels have been painted in gloss black. The paint is in very good condition. The outer lips are almost perfect but have some minor marks here and there. The previous Japanese owner refinished the lips most likely. The 4 center caps are painted in gunmetal aswell.

Comes with original valves.

04/03/2026

📦📦SOLD📦📦
Work LS105, 3 piece wheel (welded)
Front: 9x19" ET50 (A-Disk)
Rear: 9x19" ET47 (O-Disk)
Bolt pattern: 5x112
Center bore: 66.5mm
Price: CHF 990 / EUR 1100 / USD 1275

In for some cheap, sparkling, panty dropping chrome wheels? Want to bring some attention to your build? These LS105 for sale certainly help! ✨

The wheels come in full chrome centers and polished outer lips. The center caps have been sourced from Japan and are in OK shape, but show some signs of age. The high offsets allow the wheels to be fitted to most modern 5x112 cars, such as the modern Golf platform and models from other brands, such as Mercedes and Audi. With spacers, these work on a very wide range of models.

Due to the A-Disk on the front, the wheels go over most regular brakes. However, they don't fit over big brake kits, such as Brembo calipers. The rear O-Disks are for maximum outer lip. Front wheels have a decent 2" outer lip, the rears have 2,5" outer lip.

Incl. 4 original LS105 chrome center caps
Incl. 4 valves

🇨🇭 Incl. a Swiss homologation certificate

04/03/2026

📦📦SOLD📦📦
BMW Styling 38, produced by Lemmerz
Front & rear: 8x17" ET20
Bolt pattern: 5x120
Center bore: 74.1mm
Price: CHF 650 / EUR 720 / USD 840

Listen up BMW E36 series owners: For sale is a set of used Styling 38 wheels, produced by Lemmerz back in 1996. These wheels were an option for the legendary BMW 5 series. However, the specs makes this set a perfect base for an E36 build.

The wheels are in used shape: Smaller scratches are present on the spokes, some light curb rash, and the wheels were repainted at one point in time. All center caps are in good shape and hold tightly onto the wheels.

14/02/2026

🔥🔥FOR SALE🔥🔥
Work Ewing 3, 3 piece wheel
Front: 8,5x18" ET25
Rear: 9,5x18" ET25
Bolt pattern: 5x100
Center bore: 67.1mm
Price: CHF 2850 / EUR 3125 / USD 3750

These rare, step lipped Work Ewing 3 from 1994 have been completely rebuilt, inside and out. The centers were repainted in matte crystal gunmetal, a glittery, very structural paint, which gives the wheel centers a very unique look. The center plates were custom CNC machined and painted in the same color, same with the hex nuts. 2 old WORK emblems were re-used and 2 brand new, old stock WORK emblems were sourced for the hex nuts.

The centers are sandwich mounted in between polished 2,5" outer lips up front and deep 3" lips in back. The inner barrel was coated in black. The wheel is held together with brand new polished Work bolts and new serrated nuts.

The wheels were designed to fit multiple cars, e.g. Toyota GT86 & Subaru BRZ and other Subaru Models, as well as VAG models such as the VW Golf 4, VW Polo, VW Bora, VW Beetle, VW Passat, and it's related Audi models such as the S3, as well as the Audi TT. The wheels don't fit over big brake kits (such as the Brembo brakes of the STI), as they are standard A-Disks.

Incl. 4 original WORK hex nuts & custom center plates
Incl. 4 original WORK valve caps

🇨🇭 wheel homologation certificate available

13/02/2026

📦📦SOLD📦📦
Monza Speed by Work Wheels Japan, 3 piece wheel
✨NEW OLD STOCK FROM 1991✨
Front: 7x16" ET48
Rear: 8x16" ET48
Bolt pattern: 5x114.3
Center bore: 73.3mm
Price: CHF 1250 / EUR 1375 / USD 1650

These NEW OLD STOCK 16" Monza Speed, manufactured by the Japanese manufacturer Work Wheels, are a very rare model. The wheels for sale are in their original, over 30 year old state, which just looks amazing for such an old wheel.

The wheels are in overall very good condition. The wheels shows some damages on the outer lip and inner barrels, most likely due to being used as a display wheel in Japan or from storage. The color of the centers and the hex center nuts are in very good condition. The hex nuts are a little oxidized, which is almost impossible to avoid for such old items.

Incl. 4 original Monza Speed hex nuts & center plates
Incl. 4 original valve caps

🇨🇭 wheel homologation certificate available

13/02/2026

🔥🔥FOR SALE🔥🔥
Work Ewing RSβ (RS-Beta), 3 piece wheel
Front & rear: 6.5x15" ET45
Bolt pattern: 4x100
Center bore: 60.1mm
Price: CHF 690 / EUR 760 / USD 895

This rare set of almost ancient Work Ewing RSβ comes with production stickers from 1993. The wheels are true 3 piece design, unwelded, in reverse barrel configuration. They are a perfect base to rebuild them in either 15" with new outer lips or step lip them to 16" in your desired configuration.

Possible rebuild specs:
7,0x15"/16" ET39
7,5x15"/16" ET32
8,0x15"/16" ET26
8,5x15"/16" ET20
9,0x15"/16" ET13
9,5x15"/16" ET7
10,0x15"/16" ET1

They are drilled in dual 4x100 from the factory, which allows them to be fitted on a very wide range of cars from the 90's era. All drill holes are functional and can be used for mounting the wheels to the car. The goal of this double PCD was probably to lose weight but also allow for quickly swapping the wheels when changing them.

The wheels show clear signs of age: The outer lips have some curb rash spots. Also, some oxidization spots are visible. Ideally, they are sanded down or diamond cut and polished to shine again. The red painted centers show some paint peeling and should be freshly powdercoated. The model specific center caps are all included and in OK shape. If you intent to refinish the wheels, you should probably sand them down and also give them a fresh layer of clear coat.

🇨🇭 Swiss homologation certificate available

15/01/2026

📦📦SOLD📦📦
Yokohama Advan RZ2
Front: 8x18" ET45
Rear: 9x18 ET53
Bolt pattern: 5x120
Center bore: 72.6mm
Price: CHF 800 / EUR 875 / USD 1000

Listen up BMW 1 and 2 series owners: For sale is a set of used Advan RZ2 wheels. These wheels are very lightweight, measuring only 7,9kg for the 8" wheel and 8,3kg for the 9" wheel. The weight and specs makes this set a perfect base for a track spec BMW 1 or BMW 2 series. The front wheels easily clear the M-Performance brakes, while the rears come in nice concave shape.

The wheels are in used shape: Various scratches are present on the spokes, some curb rash, and the paint is very rough overall. So the wheela are a perfect base for a track wheel set or to be repaired and repainted.

🕳️ Incl. 4x adapters for 68mm BMW center caps

02/01/2026

🔥🔥FOR SALE🔥🔥
Work VS-Edition, 3 piece wheel
Front: 8x18" ET38
Rear: 9x18" ET50
Bolt pattern: 4/5x114.3 (Dual PCD)
Center bore: 73.3mm
Price: CHF 1550 / EUR 1675 / USD 1975

This very rare set of beautiful, step lipped Work VS-Edition is a rare sight in step lip configuration. The wheels share the same hardware with Work Meister S1 3P. The wheels are true 3 piece design. They are dual drilled in 5x114.3 and 4x114.3 with moderate offsets, which allows them to be fitted on a very wide range of cars from the 90's era, or rebuilt to very appealing specs with new outer lips.

The wheels show signs of age: The outer lips are in still very very shiny condition, but show some corrosion marks and scratches. The bolts show some corrosion and should be replaced or polished again. The center shows some minor scratches and paint peeling around the spokes, but are in very well shape overall. The genuine hex nut and center plates are all included, which is extremely rare for such old wheels. The gel caps are in good shape.

Possible rebuild specs front:
8,5x18" ET32
9,0x18" ET25
9,5x18" ET19
10,0x18" ET13

Possible rebuild specs rear:
9,5x18" ET44
10,0x18" ET38
10,5x18" ET32
11,0x18" ET25

Incl. 4 original Work hex nuts & center plates

🇨🇭 Swiss homologation certificate available

felgenfetisch

10/06/2026

04/06/2026

26/04/2026

04/03/2026

04/03/2026

14/02/2026

13/02/2026

13/02/2026

15/01/2026

02/01/2026

Adresse

Webseite

Benachrichtigungen

Verknüpfungen

Teilen

Kategorie