GSG Performance

31/05/2026

How to find us during road closure 🚧

Attention Knockhill Customers this week.

If you are coming to Knockhill this Monday to Friday, the road to Knockhill from Dunfermline/Edinburgh/Junc 4 will be closed from Monday 2nd June to Friday 5th for re-surfacing.

If you are travelling from North of the Circuit, from Fife, Edinburgh or the Borders, then the easiest, and quickest, route to Knockhill is to make your way on to the M90, exit via junction 6 at Kinross, and follow the brown Knockhill signs. Travelling from Glasgow and the West is open as normal, so head over the Clackmannanshire Bridge and follow the signs.

If you arrive at the Road Closed signs, then follow the Fife Council diversion signs via Saline, Blairingone to Powmill, and this will bring you into the venue from the North. Please allow an extra 15 - 20 minutes if you are diverted.

The road will be open as normal for next Saturdays's Bike Track Day and rally experiences, and Sunday's Hot Hatch & Scottish Ford Live.

09/05/2026

📈 Dyno work has been mad busy at the moment 🙏 but the suspension bench hasn't been far behind

Yamaha T7 in past this week for some provalve upgrades and re-spring

All setup for some touring & trail riding

21/04/2026

I wish I could get gains like this out of every bike 📈

Rocket 3 GT mapped up via platform

Mega torque too!!

All going well until I locked key fob under seat 🙈

04/04/2026

Ducati 848 Evo with some cylinder and piston modifications taking capacity out to 1048cc

In for some running in and custom mapping work via tune ECU

📈 Just over 140whp and 80ft/Ibs torque

#848

25/03/2026

2025 Panigale V4S in for some upgrades and setup along with some race rearsets fitting up

TRDS up front & TRDS-R on the rear 📝

🤞 some dry weather this Sunday

20/03/2026

📈 Some mega bikes in past recently, from standalone ECU work to custom map work

Also had the highest powered normally aspirated standard engined bike on the dyno too -r

Any enquires please WhatsApp 📱 07500171558

15/03/2026

2026 Race season prep and build for this 2025 BMW S1000RR

Some mega parts supplied and fitted here at the workshop 📈

TRDS front cartridge kit along with TRDS-R rear shock

electronic parts along with various blanks and chassis parts

Looking forward ro seeing how this one goes at the NW200 and Scottish Championship, good luck Sean 🏁

brembo akrapovicexhaust alpharacing dynotuning raceprep performancegsg

05/03/2026

2021 KTM 1290 Superduke R custom mapped up via platform after some exhaust modifications

📈 Each cylinder individually mapped, smoothing slow speed running and midrange oomph

02/03/2026

📈 some German engineering for you

Two 2025 BMW S1000RR's, completely standard with running in mileage run up 5 months apart

BMW claim 210hp 84ft/Ibs torque at the crankshaft

10-12.5% transmission loss and both bikes within 0.5hp at the wheel at 188hp

Confirming both BMW motorrad and accuracy & repeatability, interesting...

27/02/2026

🔊 Make some noise, it's Friday

S1000RR in for exhaust install and full custom mapping via platform