AutoProg New Zealand

AutoProg New Zealand Specialized Automotive Module Programming, Cloning, Modification & Repair.

Another Fiat airbag module with the dreaded B0100-49 - Internal ECU failure repaired and ready to return to one of our t...
30/05/2026

Another Fiat airbag module with the dreaded B0100-49 - Internal ECU failure repaired and ready to return to one of our trade customers.

Call or message us today for all your module repair needs!

2022 Fiat Ducato that had come in with a B0100-49 ECU Internal Failure fault. This fault occurred right after the owner ...
10/05/2026

2022 Fiat Ducato that had come in with a B0100-49 ECU Internal Failure fault. This fault occurred right after the owner had battery issues and is a common failure point when a low voltage issue has occurred.

Traditional scan tools are unable to erase this code and the dealer quoted $1500 to replace the unit.

We are able to repair the corrupted EEPROM data in these units without the big expense of a new unit.

Full bench testing and repair carried out in house and no more airbag faults!

Call or message us today for all your module repair needs!

Another VE Commodore instrument cluster in having all its data swapped over to a replacement unit, the original unit pow...
04/05/2026

Another VE Commodore instrument cluster in having all its data swapped over to a replacement unit, the original unit powers on but does not display anything on the LCDs.

Call or message us today for all your module programming and cloning needs.

Custom programming on a 2011 Mitsubishi Outlander we did for one of our trade customers to remove the dash warnings for ...
24/04/2026

Custom programming on a 2011 Mitsubishi Outlander we did for one of our trade customers to remove the dash warnings for the failed Auto Levelling Headlights, allowing for full normal operation of the lights.

A quick tune adjustment on this Chev truck with an LS1 and 4L60E combo this morning as the owner was unable to do a burn...
19/04/2026

A quick tune adjustment on this Chev truck with an LS1 and 4L60E combo this morning as the owner was unable to do a burnout!

He had lots of opinions from mechanics ranging from needing a line lock kit to an after market torque converter.

Some minor adjustments disabling brake torque management and adjusting shift schedules to let it hold a gear and this truck will now spin a tyre!

Call or message us today for all your Tuning, EGR, DPF and AdBlue needs!

First job for the day done and dusted replacing a faulty TCM on a Ford Focus DPS6 Transmission.All programming and calib...
25/03/2026

First job for the day done and dusted replacing a faulty TCM on a Ford Focus DPS6 Transmission.

All programming and calibration of the new unit done in house saving the customer a costly tow to the nearest dealer 2 hours away!

Call or message us today for all your module programming needs!

1KZ Toyota Hilux sent in over the weekend for a suspected ECU fault and crank no start. We found a couple of capacitors ...
22/03/2026

1KZ Toyota Hilux sent in over the weekend for a suspected ECU fault and crank no start. We found a couple of capacitors on the board had leaked and 1 had completely separated 1 leg from the board.

A quick clean to remove the conformal coating, some clean up on a few contacts that had started corroding, a full set of new capacitors and a new conformal coating and this ECU is already to head back to the customer.

Call or message us today for all your ECU repair needs!

Today we had to do a bit of translating as we carried out some custom coding on a 2000 BMW Z3 to remove the seat occupan...
20/03/2026

Today we had to do a bit of translating as we carried out some custom coding on a 2000 BMW Z3 to remove the seat occupancy sensors after the customer fitted some aftermarket front seats and could not get the vehicle certified because the airbag light was on.

Call or message us today for all your coding and programming needs!

Another VW DSG unit sent in by one of our trade customers for cloning.These units are super common to see failed now.Cal...
26/02/2026

Another VW DSG unit sent in by one of our trade customers for cloning.

These units are super common to see failed now.

Call or message us today for all your module cloning and programming needs!

2026 Can Am Ryker 900cc in for a tune today.We were able to squeeze an extra 10hp and 20nm out of it making a very noti...
21/02/2026

2026 Can Am Ryker 900cc in for a tune today.

We were able to squeeze an extra 10hp and 20nm out of it making a very noticeable improvement on something so light.

Call or message us today for all your performance tuning needs!

Address

Whitianga
3510

Telephone

+642041373874

Website

Alerts

Be the first to know and let us send you an email when AutoProg New Zealand posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AutoProg New Zealand:

Shortcuts

Share

Category