Jay Wire Solutions

10/25/2026

From CAD to coated and installed. 🦾

This ’66 Chevelle needed a custom mounting and fan-shroud solution for its transmission cooler. Matt drew up the assembly in-house, SendCutSend brought the design into metal, and our local friends at Monarch Powder Coating And Sandblasting handled the finish.

Now it’s installed with the Derale Performance cooler and SPAL USA fan—another piece of the build coming together.

10/16/2026

What’s Matt working on underneath the Bronco?

We’re bringing 3D scanning into the Jay Wire Solutions workflow!

Using a Creality 3D scanner, we’re capturing the power step setup on this Ford Bronco and bringing the geometry into the digital world.

Being able to work with a digital model of an actual component opens up some exciting possibilities for custom design, fabrication, and product development.

We’re just getting started with this technology, but we can already see plenty of opportunities to put it to work!

10/12/2026

Sometimes the smallest details make the biggest difference.

We’re working through the plumbing on the air-to-water intercooler system in this Chevelle. We needed to transition from AN fittings to hose barbs and wanted to match the geometry of the existing pump connections.

We started with Fragola Performance Systems fittings and had them custom-machined by our neighbor Abraham Machining to get exactly what we wanted.

Paired with a modified Motion Raceworks reservoir, we’re getting everything positioned and mocked up before final hose crimping.

The system also features a pump from VMP Performance, bringing all the fluid flow needed to keep charge temps in control!

A little extra effort to get the fit, routing, and details right before making everything permanent.

10/09/2026

Factory Ford power steps on your custom build? It’s easier than you might think!

Our new Power Step Controller takes the complicated electronics out of the equation. Just 12V power, ground, and a door switch input for each side. No CAN bus, no factory computer, and no complicated programming.

We did the hard part so you don’t have to!

What would you put a set of factory power steps on? 👇

Learn more: https://www.jaywiresolutions.com/products/power-step-controller

10/07/2026

One of the biggest challenges with adding late-model OEM power steps to an older or custom vehicle is making them actually work without the original truck electronics.

That’s exactly why we built this.

Our standalone Power Step Controller and harness allow you to run 2017–2022 Ford Super Duty powered running boards on nearly any vehicle — no CAN bus or factory Ford modules required.

Simple inputs. OEM-style operation. Built and assembled right here at Jay Wire Solutions.

Available now at JayWireSolutions.com

10/07/2026

Possum is coming out to play this week - lots of changes - big expectations!

LFG 🦾🦾🦾

GH Motorsports
Gen 2 Garage

10/04/2026

It’s finally LIVE. 👊

We’ve spent a lot of time developing and testing our new Stand-Alone Power Step Controller, and it’s officially available from Jay Wire Solutions.

Our controller allows you to run 2017–2022 Ford Super Duty OEM power running boards on nearly ANY vehicle — no CAN bus connection, BCM integration, or programming required.

Give it power, ground and door inputs, and the controller takes care of operating the factory steps.

That means you can now use high-quality OEM Ford power steps on older trucks, lifted trucks, restomods, custom builds, or just about anything else you can figure out how to mount them on.

Each kit includes our controller and a complete wiring harness, built here at Jay Wire Solutions.

Starting at $600

👇 Check it out here:
https://www.jaywiresolutions.com/products/power-step-controller

Universal Ford OEM Power Running Board Controller Kit Add OEM Ford power running boards to nearly any vehicle — no CAN bus, factory control module, or programming required. The Jay Wire Solutions Universal Power Running Board Controller Kit makes it possible to retrofit 2017–2022 Ford OEM powere...

09/04/2026

Productivity is low. Morale is up. 😂🍔

Getting a little head start on the holiday weekend at Jay Wire. Hope everyone has a safe Labor Day weekend! 🇺🇸

09/02/2026

Making progress on the ’65 Lincoln!

The old fuel, power steering and transmission cooler plumbing is out, and we’re starting to put everything back together the right way.

The new Holley EFI system is going in, along with an Aeromotive fuel pressure regulator, Derale transmission cooler, and Lowdoller Motorsports pressure sensors to keep an eye on everything.

Still plenty of work ahead, but the engine bay is starting to come together!