Encompass Auto Care

Website

Encompass Auto Care Your trusted local auto repair experts

10/26/2026

Too much engine oil can be just as bad as not enough! πŸ˜³πŸ”§

This vehicle wasn't running right, so our technician started investigating. After checking the oil level, he discovered it had been filled to nearly TWICE the recommended amount!

Overfilling your engine oil can cause excessive pressure, oil foaming and potentially serious engine damage.

Our tech even shows the measurement so you can see just how much extra oil was in there.

πŸš— Rochester drivers, here's your reminder: More oil doesn't mean better protection. Always make sure your vehicle has the correct amount recommended by the manufacturer.

Have you ever checked your oil level after getting an oil change? πŸ‘€

πŸ”§ Car Care Tip of the Day: Don't ignore what's happening underneath your vehicle!Rochester roads can be tough on your su...
10/25/2026

πŸ”§ Car Care Tip of the Day: Don't ignore what's happening underneath your vehicle!

Rochester roads can be tough on your suspension, especially with potholes, road salt and changing seasons. πŸ›ž

Over time, these conditions can contribute to worn bushings, loose suspension components and corrosion underneath your vehicle.

That's why checking underneath your car during routine maintenance is so important. Catching wear early can help prevent bigger repairs down the road!

πŸš— Rochester drivers, when was the last time you had your suspension inspected?

10/23/2026

What are those sensors attached to your wheels during an alignment? πŸ›žπŸ”§

They're called alignment targets or heads, and they play an important role in measuring your vehicle's wheel alignment!

Our technician shows how these pieces of equipment are mounted to the wheels and used with our Hunter alignment system to measure important angles.

These measurements help us identify alignment issues that could cause uneven tire wear, pulling to one side or steering problems.

It's another example of how the right equipment and attention to detail make a difference when servicing your vehicle.

Ever wondered what goes into a professional wheel alignment? πŸ‘€

10/21/2026

A precise wheel alignment starts with the right equipment and setup! πŸ›žπŸ”§

Ever wonder how mechanics measure your vehicle's wheel alignment?

Our technician walks us through the Hunter alignment system we use here at Encompass Auto Care.

From properly positioning the alignment heads to rotating the wheels back and forth, each step helps the system collect accurate measurements of your vehicle's alignment angles.

Why does this matter? Accurate measurements help technicians identify alignment issues that can lead to uneven tire wear, poor handling and steering problems.

It's a look at the technology and attention to detail behind our wheel alignment services here in Rochester, MN!

A small leak can turn into a bigger headache! πŸ”§πŸ’§Whether it's a fluid line or a hose, even a small leak can affect how yo...
10/19/2026

A small leak can turn into a bigger headache! πŸ”§πŸ’§

Whether it's a fluid line or a hose, even a small leak can affect how your vehicle performs.

Our tech is checking for leaks because finding the source is just as important as fixing the problem.

Noticing fluid spots under your vehicle or having to top off fluids more often than usual?

πŸ“ Schedule an inspection with Encompass Auto Care in Rochester, MN!

πŸ”— https://encompassautocare.com/auto-repair-in-rochester-mn/engine-diagnostics-repair/

10/18/2026

What is a caster sweep during a wheel alignment? πŸ›žπŸ”§

Part 3 of our Buick Enclave wheel alignment!

Our technician walks through the caster sweep process, turning the steering wheel left, right and back to center so the alignment equipment can calculate important steering and suspension angles.

These measurements help us understand how the wheels are positioned and identify what adjustments may be needed for proper alignment.

It's another important step toward better handling, steering stability and even tire wear.

From mounting the equipment to compensation and the final caster sweep, precision matters every step of the way!

10/15/2026

Why does a vehicle need to be compensated before a wheel alignment? πŸ›žπŸ”§

Part 2 of our Buick Enclave wheel alignment!

With the alignment equipment mounted, our technician moves on to the compensation process.

This step helps the alignment system account for slight variations in the wheel and equipment setup, allowing for more accurate measurements before adjustments are made.

It's one of those important steps you might not see when bringing your vehicle in for an alignment, but it makes a difference in getting the job done right.

Stay tuned for Part 3! πŸ‘€

10/14/2026

A proper wheel alignment starts with the right setup. πŸ›žπŸ”§

We're working on a Buick Enclave, and in Part 1, our tech walks through the mounting process to prepare the vehicle for a wheel alignment.

Before making any adjustments, the alignment equipment needs to be properly attached and positioned to get accurate measurements.

Why does this matter? Proper wheel alignment helps prevent uneven tire wear, improves handling and keeps your vehicle tracking straight down the road.

Stay tuned for Part 2 as we get into the alignment process!

Rochester drivers, what's the biggest issue you've had with your vehicle? πŸ”§πŸš—From European vehicles like BMW, Mercedes an...
10/12/2026

Rochester drivers, what's the biggest issue you've had with your vehicle? πŸ”§πŸš—

From European vehicles like BMW, Mercedes and Volkswagen to domestic and Asian makes, our bays see a little bit of everything.

Whether it's a tricky electrical issue, an oil leak, suspension problems or routine maintenance, our technicians have the knowledge and equipment to get to the bottom of it.

We're curious, Rochester! πŸ‘‡

What's the most frustrating car problem you've ever dealt with?

10/11/2026

A proper tire install doesn’t stop once the tire is mounted. πŸ›ž

Here’s a look at the process of mounting and balancing a tire before it goes back on the vehicle.

Proper balancing helps the tire rotate evenly, reduces unwanted vibration and helps provide a smoother ride.

Good tire service comes down to the process and the details. πŸ”§

Address

6212 34th Avenue NW
Rochester, MN
55901

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm

Alerts

Be the first to know and let us send you an email when Encompass Auto Care posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share