Angry-Ass

Angry-Ass Performance and restoration solutions for modern classic BMW's. If you don't see what you need let us know and we'll work with you to create it.

As part of our effort with on his powered we have developed a set of gasket plates to replace the OEM bonded rubber...
07/16/2026

As part of our effort with on his powered we have developed a set of gasket plates to replace the OEM bonded rubber units. These use readily available and cost effective o-rings for sealing which makes service cost competitive compared to OEM.

Shown on our development and with a mockup of our carbon composite intake manifolds.

While the OEM gasket plates were designed to seal as well as decouple the intake manifolds for reduced noise, vibration and harshness we feel that for most owners a slight increase in NVH is worth it for improved sealing.

Carbon composite manifolds fit well with the OEM as well for a nice fitment verification.

Last we have the 3D printed mockup of the carbon composite intake manifold injector fl**ge on the new seal plate.

We are currently testing the seal plates and looking to release in August for sale. Get in touch if you have any questions!

We’re updating powered with a high performance radiator along with other cooling system components. But first we h...
07/16/2026

We’re updating powered with a high performance radiator along with other cooling system components. But first we have to drain the coolant and remove the old bits.

To start we used our Angry Ass | Fan Clutch and Tensioner Combination Wrench 32/19 along with the Angry Ass | Water Pump Holding Wrench to remove the viscous fan.

We used a small screwdriver to remove the fan shroud rivets as well so the fan and shroud come out together. If you get thirsty the 32/19 combination wrench has a bottle opener . . .

With the fan and shroud out of the way we disconnected the hoses from the radiator.

Next we removed the radiator mounting clamps.

We will be offering a kit that includes all mounting parts needed for installing a new radiator without having to hunt down every part. Be sure to check back!

Before removing the radiator we removed the upper seal.

With the old radiator out it’s time to install the new parts!

After some deep cleaning of the wheel wells it’s time for some small but necessary details on the for . New fender...
07/07/2026

After some deep cleaning of the wheel wells it’s time for some small but necessary details on the for . New fender liners and hardware.

Out with the old inserts.

Time for some cavity protection spray to keep things sealed up.

All installed and torqued to specification.

We’ve added SCANGRIP lighting from Denmark to our catalog. These are the best work lights we’ve found and we’re excited ...
04/14/2026

We’ve added SCANGRIP lighting from Denmark to our catalog. These are the best work lights we’ve found and we’re excited to bring them to the classic BMW community. No matter if you’re turning wrenches in your garage on the weekend or needing lighting for detailing, SCANGRIP and Angry Ass have you covered.

www.Angry-Ass.com

Address

The Woodlands, TX
77380-77386

Website

Alerts

Be the first to know and let us send you an email when Angry-Ass posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Angry-Ass:

Shortcuts

Share

Category