Broeker Small Engine LLC

Call Contact the business

Broeker Small Engine LLC We serve St. We are a small, family-owned business, and we look forward to helping you with your small engine repair needs. Open Monday - Friday 8am-5pm.

Charles County, Missouri, & the surrounding area by providing service and repair on anything from a chainsaw to a side by side excluding Chinese brands and big box store handhelds.

Full tear down of a 2019 Polaris Ranger 1000 XP Crew that decided to run itself very low/ out of oil. Cylinder head dam...
10/21/2026

Full tear down of a 2019 Polaris Ranger 1000 XP Crew that decided to run itself very low/ out of oil. Cylinder head damaged beyond repair (able to find good shape used one to save the customer money) , all the intake valve got bent most likely from cams heating up from lack of oil and causing the timing to skip. but besides that, will just be getting some new bearings, piston rings, oil pump chain, timing chain, manual chain tensioner among some other things like new intake boots, etc. Before long, it will be back up and running as good as new.

10/17/2026

Sometimes technology helps, sometimes it can make things worse. In this case it helped!

10/15/2026

Hello all,

Do you or someone you know have the experience we need? We are looking to hire an experienced small engine repair mechanic. The right candidate will have experience working on and diagnosing powersports and lawn and garden equipment. We are working on an official job description but wanted to get this out there to start the process as we are very busy and need an additional set of hands around here. Please message us here, send a resume to [email protected] and/or call 636-221-6735 and let's have a chat.

Thank you,

Andrew Broeker
Owner
Broeker Small Engine LLC

Before and after a new crankcase/oil sump gasket (went ahead and replaced the oil seal as standard procedure). The new g...
09/18/2026

Before and after a new crankcase/oil sump gasket (went ahead and replaced the oil seal as standard procedure). The new gasket is much beefier and also comes with new bolts. It was leaking oil pretty aggressively before. Briggs & Stratton on a S**g Freedom Z zero turn. All fixed up now!

Rhino 660 getting a full rebuild including new crankshaft and bearings, piston and rings, cylinder. New transmission be...
09/18/2026

Rhino 660 getting a full rebuild including new crankshaft and bearings, piston and rings, cylinder. New transmission bearings, new counter shaft bearings, new middle drive gear bearing and a beefed up bearing holder (they often break and cause issues). It came in with a no start and was using a ton of oil. Started out as maybe just a top end rebuild but then after inspecting the rod bearing, it had excessive play and had to pull rest of engine and open it up. Several bearings were gritty and not smooth. It will be better than it was when it was new before too long!

This was all that was replaced with a transmission bracket kit and battery box for a Hustler Raptor zero turn. The fron...
08/14/2026

This was all that was replaced with a transmission bracket kit and battery box for a Hustler Raptor zero turn. The front transmission brackets were broken on both sides as well as the battery bracket. The battery bracket cracks and allows the frame to flex which then breaks the transmission mounts according to Hustler. The new installed brackets have been redesigned and much beefier.

05/16/2026

Mule pro got a new bed winch last week. This is going to come in handy for deer season and other farm and home tasks!

1999 Honda 400ex got a new top end. New piston and rings, new valves and springs, new timing chain, new timing chain te...
05/16/2026

1999 Honda 400ex got a new top end. New piston and rings, new valves and springs, new timing chain, new timing chain tensioner. Fires up immediately with no smoke, and tons of power again!

04/28/2026

Husqvarna K770 saw got a top end rebuild. Back to the concrete company to make some more money! See pics of piston and cylinder before rebuild!

04/28/2026

Toro Dingo had a rusted out muffler and then the exhaust studs broke off. Had to extract them and then install some new threads. Got the new muffler installed and nice and quiet again compared to what it was. Before and after pic in the comments.

Address

Wentzville, MO
63385

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Telephone

+16362216735

Website

Alerts

Be the first to know and let us send you an email when Broeker Small Engine LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Broeker Small Engine LLC:

Shortcuts

Share

Category