06/04/2026
Due to so many requests, here is a follow up on the MC19 regarding the dash.
The dash is a high quality Koso unit, it is not cheap chinese or a knock off.
The unit is fully programmable for any and all configurations including different presets of tachometer from 10k to the 18k as you see displayed.
It can be setup to work with any electronic oem speed system (for the most part), however it will remove any cable driven speed and tach signals to electric.
The gear position indicator doesn't rely on a physical switch, it has a calibration that you ride (not to full rpm as its not required) and can calculate the gear ratios vs speed and rpm.
The photo you see from over (with partial in the photo) the top tree is full daylight against it, the reflection you are seeing is only the camera getting the reflection of the sky, in person you don't see this, it is clear as day.
The closer photo of it shows the clarity now that the protective film has been removed. It is extremely crisp.
The left and right side show the fill panels that have been mated to this to cover the wiring and the backside of the headlight for a cleaner appearance.
The video also shows the warnings for pre and full limiter warnings (which are also programmable), in neutral its hard to distinguish between the two but pre flashes the bar black (in day mode) and changes to rev in full limit warnings.
There is tons of features including phone pairing for music info and call details. However if i was to list them all we would be here for days.
This setup has be designed to bolt in directly on the MC19 frame stay, the plastic used is more than strong enough and has all the uv protection required for outdoor and in the sun use.
You can get this all made in aluminum via cnc but it would be a lot more costly, however either one can also be finished in different forms, i.e. black texture paint, cnc can be brushed, anodized, etc..
Hope this helps clear up any questions people may have about it.
