JL Automotive And Tuning

Call Directions Contact the business

JL Automotive And Tuning Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from JL Automotive And Tuning, Automotive repair centre, 3a 6 Pembroke Road, Broome.

👑 GCG Stage 3 ball bearing VDJ70 turbo👀 Check out the results!!! 👀 Webby’s early model Cruiser lives with a trailer behi...
08/09/2026

👑 GCG Stage 3 ball bearing VDJ70 turbo

👀 Check out the results!!! 👀

Webby’s early model Cruiser lives with a trailer behind it, so he needed something that flat out works! Previous work included a Manta 3 inch and clutch upgrade before a tune with the factory turbo years earlier

Now sporting the GCG stage 3 ball bearing turbo upgrade and new high flow injectors from the team at Dieselgeeks.

The only other mod for this work was removal of the factory snorkel for the improved Safari Armax snorkel into the factory air box and intake pipe

Keeping things conservative at 19:1 AFR at 29psi, we were rewarded with 300hp.

Where it all began for us….. E series Falcon. This combo has been running on 10psi for some time, so we thought it shoul...
07/09/2026

Where it all began for us….. E series Falcon.

This combo has been running on 10psi for some time, so we thought it should be time to turn it up in preparation for the dart block assembly to be dropped in.

Basic HCI, Edelbrock heads and RPM II intake, XE270 cam, stock bottom end, S366 Borgwarner turbo and customs 4 into 1 manifolds to a single 3.5inch exhaust.

With the innovate SCG-1 boost controller/wideband controller, we cranked a little more into it until we ran out of fuel pump with the baby 255lph in tank.

With the Moates Quarterhorse in the factory ECU, through the T56 we were rewarded with just shy of the block cracking 500rwhp, so that means it shouldn’t crack 🤔🤣. For street duties we will leave it at 10psi where it makes a fun 432rwhp.

🚨 275hp/768nm DC330 equiped VDJ70🍹+127hp +433nm 30psi🔈 Manta Performance 4inch TBE💪 1600nm NPC clutch🌬️ Safari Armax Sn...
07/09/2026

🚨 275hp/768nm DC330 equiped VDJ70

🍹+127hp +433nm 30psi

🔈 Manta Performance 4inch TBE

💪 1600nm NPC clutch

🌬️ Safari Armax Snorkel, stock airbox and intake pipe with the Ryco Nanocel air filter in control of the dust.

Huge gains from the NPS 4HK1 🚗 💨 I’ll let the results do the talking 💪
28/06/2024

Huge gains from the NPS 4HK1 🚗 💨

I’ll let the results do the talking 💪

2022 79 series🐎 Over 200hp💪 100% torque increase👩🏽‍🦽 A boost curve smooth enough for your grandma in a wheel chair 😉💨 No...
10/05/2024

2022 79 series

🐎 Over 200hp
💪 100% torque increase
👩🏽‍🦽 A boost curve smooth enough for your grandma in a wheel chair 😉
💨 No smoke!
🗣️ MANTA Performance stainless 4inch making the noise!

Late model high output 150kw N80 HiluxConverter locked in 4th🐢 Emissions in place💪 110nm peak increase, 40% more off the...
06/05/2024

Late model high output 150kw N80 Hilux

Converter locked in 4th

🐢 Emissions in place
💪 110nm peak increase, 40% more off the bottom
🐎 30hp increase
📊2 Psi boost increase
👀 AFR and Boost for the world to judge 😎

It’s not often we get the expected results from a TD42T patrol without telling the customer they need a new pump! Darcy’...
19/06/2021

It’s not often we get the expected results from a TD42T patrol without telling the customer they need a new pump!

Darcy’s patrol was an exception to this, sporting a stock high flowed turbo, Cross Country intercooler and 3in exhaust we were surprised by the results.

AS ARRIVED 👉 114hp/329nm
TUNED 💪💪💪 153hp/473nm

With only 14psi and nice and safe AFR’s!!

Still a fair amount in it too if the customer was to upgrade to a more efficient turbo!

We had Dave’s VE SS in recently for a few upgrades and it didn’t disappoint!💥VCM Performance 262 cam spring and chain pa...
25/09/2020

We had Dave’s VE SS in recently for a few upgrades and it didn’t disappoint!

💥VCM Performance 262 cam spring and chain package
💥VCM Performance OTR retaining the MAF
💥MANTA Performance twin 3inch and extractors
💥Clutch upgrade and replacement of all seals and gaskets
💥Shockworks full coilovers 🤤

On the rollers retaining the factory MAF the 6.0l produced the goods! 403rwhp@ 6000rpm! Such a great car to drive now after fitment of the coilovers!

👉VDJ 79 EMISSION COMPLIANT TUNE👈🤕Before 148rwhp 396NM💪Tuned 180rwhp 620NMRetaining factory AFR @ 17PSIGreg brought his 2...
16/07/2020

👉VDJ 79 EMISSION COMPLIANT TUNE👈

🤕Before 148rwhp 396NM
💪Tuned 180rwhp 620NM
Retaining factory AFR @ 17PSI

Greg brought his 2017 DPF cruiser in recently for a little love. After replacing the standard clutch with an NPC Performance Clutches 1300NM kit while retaining the factory DPF filter we were able to squeeze an extra 220nm and 30hp out of it completely stock!

Greg has also reported back with much better fuel figures after a recent trip to Kununurra towing his camper!

Drop in or call for any questions regarding tuning your late model CRD turbo diesel!

We had Steve’s cruiser on the roller recently and got some impressive results. 👉Stock 157hp / 375nm💪Tuned 218hp / 680nmR...
02/07/2020

We had Steve’s cruiser on the roller recently and got some impressive results.

👉Stock 157hp / 375nm
💪Tuned 218hp / 680nm

Running a GSL stainless 4inch exhaust and NPC Performance Clutches 1300nn clutch kit.

Sensations to drive and the sound of that 4 inch 😍

Address

3a 6 Pembroke Road
Broome, WA
6725

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+61891923358

Website

Alerts

Be the first to know and let us send you an email when JL Automotive And Tuning posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JL Automotive And Tuning:

Shortcuts

Share

Category