https://www.facebook.com/177927765412129/

Tidy Tuning, Hobart (2026)

16/10/2026

Custom in-person tuning - Final 3 locations

You get all of the usual benefits of the remote tune service, in addition to the following:

- Real ignition timing matched spot-on to live commanded ECU timing using a timing light.

- Full throttle air to fuel ratio customised more accurately to the individual vehicle using a portable wideband exhaust probe.

- No need for a laptop and no need to buy NDSII or a cable. I take care of it in-person using my own equipment.

The service is only available at the locations below, not in transit between them. Apologies for the inconvenience for those impacted. In some cases, there may be some wiggle room either side of the days listed below

Friday 23rd October - Port Macquarie, NSW
Saturday 24th October - Newcastle, NSW
Thursday 29th October - Frankston, VIC

Pricing is as follows:

$700 for the custom in-person tune service
$500 to upgrade from an existing remote tune to a custom tune
Ignition cut rev limiter is an extra $250

Limited spots available. Please reach out ASAP to book.

13/09/2026

TB48DE Premium Exhaust Install Kits

- Multi-layer steel exhaust manifold gaskets
- Multi-layer steel catalytic converter gaskets
- 1 genuine Nissan exhaust manifold stud
- 1 genuine Nissan exhaust manifold nut

The MLS exhaust manifold gaskets and catalytic converter gaskets are made in Japan by Stone/Corteco, believed to be the OE manufacturer of the genuine Nissan gaskets.

These premium gaskets are much nicer and longer lasting than any gaskets supplied with any aftermarket exhaust in Australia and they are re-usable.

The stud and nut are one of those “Better to have and not need than to need and not have” things, as it’s quite common for a stud to break or a nut be damaged during the removal of the original exhaust manifold. If you get really unlucky and break more than one, these are also available individually with express post.

$100 inc express post when purchased by itself

$10 off when purchased with extractors or an exhaust with extractors (made possibly by taking out Pacemaker's supplied gasket)

$10 off when purchased with an NDSII + cable bundle or an NDSII + cable + tune bundle (made possible by combining postage with the cable)

04/11/2025

There is now another great header-back exhaust system (high flow cat and cat-back) on the market for the TB48, the Pacemaker King Brown system. It's very nicely built, constructed of 409 stainless steel and has 10mm machined flat flanges throughout.

Pricing is $1250 plus postage ($170 off RRP). Postage prices are very reasonable and it ships direct from Pacemaker in Adelaide, Melbourne or Brisbane.

Works great paired with Pacemaker extractors. More info on the extractors below:

https://www.facebook.com/tidytuning/posts/pfbid0LYpknMaQ7Qd5SgAK5vFRntHTGgHjV8mHeaEDXG6LgtMQB8j9Erre8NBFVeQdYhVEl

Send through a message to confirm postage price and availability!

21/08/2025

Nissan TB48DE 2000-2025+ International Definition Pack for Tuners

New lower price. Simplified FULL pack that includes ALL models and variants of the TB48DE.

This is the most full-featured definition pack available for ALL 2000-2025 Nissan TB48DE vehicles.

To name just a few inclusions:

- Full control over both the soft throttle rev limiter and fuel cut rev limiter
- Correctly displayed ignition timing trim tables being +/- from 0
- VTC and VIAS setpoint control
- Injector divisor. Not having this one for turbo tunes is a big limitation.
- MAF offset. Not having this one makes it difficult to run the newer, better Nissan MAF sensor.
- The ability to raise several torque limits that severely limit the vehicle in soft sand or up steep climbs
- High coolant temp enrichment
- Brake switch throttle cut disable
- Several exclusive maps necessary to properly rescale for turbocharged applications
- Patch to enable logging of the load position in the Fuel Compensation map, essential for quality custom tuning
- Correct O2 sensor disable patches, not just disabling of the fault codes
- A handful of other exclusive features

The pack includes:
- XDF definition files for ROM editing in TunerPro
- XML definition files for RomRaider checksum correction for 2000-2016 models (not needed for most flash tools)
- A list of confirmed ROM IDs for each firmware group

Pricing is as follows:
AUD$700 for the full definition pack for all TB48DE ROMs
AUD$1150 for ignition cut rev limiter (requires definition pack)
AUD$50 for an NDSII license (special price applies only when combined with a definition pack)

Definition packs are NOT for distribution or sharing and are individually watermarked throughout each file. There is a huge amount of work behind the development of these packs, performed over a period of 7 years. You are eligible to receive an AUD$120 referral bonus for any other tuners you refer to us who also purchase a definition pack.

More info on the ignition cut rev limiter here:

https://www.facebook.com/tidytuning/videos/992295886231762

Tuner definition pack demo here. You can choose auto-translated subtitles to many different languages:

https://www.youtube.com/watch?v=UpTpm0FPEck

24/07/2025

I had a win with a remote tune customer’s ECU today. We could not connect to the ECU. The customer had the wiring checked and no problems were found. He sent the ECU to me and it still would not connect on the bench. It turned out that part of the original waterproof coating on the PCB was missing, causing it to corrode over time. After a thorough clean, the ECU now connects and I’ve bench flashed the tune to it. Because this one has been removed from the vehicle, this will get a post-tune fuel trim check, rather than a pre-tune one.

12/06/2025

Manta Exhaust Systems

I have always been a fan of Manta exhausts and have been a reseller for some time but was reluctant to offer their TB48 exhausts due to them being made-to-order and not kept in stock. That's about to change!

After several good chats with Manta, they have committed to making a batch of 10 exhausts and plan to keep them in stock ready to ship from here on in. It's now our job to show them that it's worth their while to keep them in stock.

Pricing is as follows:

TB48DE aluminised steel cat-back system with a centre and rear muffler plus a high flow cat: $1250 plus postage

TB48DE aluminised steel cat-back system with a centre and rear muffler plus a straight pipe for off-road use: $1080 plus postage

TB48DE aluminised steel cat-back system with a centre and rear muffler: $880 plus postage

Postage varies between $20 and $150 per system. Most of Australia is $120. Close to Perth is cheaper. There is also an option to pick up from Belmont WA or Melton VIC.

There is a $20 bundle discount when purchased with either Pacemaker extractors or a tune.

Message me through this page to order.

03/06/2025

Pacemaker TB48DE Extractors

I've been a Pacemaker reseller for some time but never did much with it... until now!

PH9550 TB48DE extractors. Includes upper piece, lower piece and assembly hardware.

$890 for just the extractors or $870 when purchased together with a tune. Pacemaker are no longer offering fixed price shipping so please send a message through this page with your suburb and postcode to confirm the shipping price.

Why I recommend Pacemaker over others:

- Closest to equal length primary runners on the market
- Longest secondary runners on the market
- 6>2>1 layout with correctly placed O2 sensor bosses

Some of the other options on the market do have nicer welds and quality of finish. The pros listed above far outweigh the cons though. If you're fussy like me, ten minutes with a die grinder goes a long way. Same goes for the included gasket. I'd recommend either cleaning and re-using the Nissan multi-layer steel gaskets or purchasing new Nissan gaskets.

To order, send a message through this page.

04/05/2025

Are you a tuner or dyno operator in Australia?

The TB48 GU Patrol community has a huge enthusiast base and the factory tune leaves plenty of room for improvement in a lot of different areas.

Expand your service offerings by offering tuning services for the TB48DE. They are a great platform to work with. I offer a range of services from the tuner definition pack where you do all of the tuning work all the way through to a complete remote tune service where all you need to do is dyno the vehicle and run over a few checks.

One of the services that I offer that I have not yet mentioned on this page is the base map pack. This is a full set of base maps with most of the hard work done for tuning N/A TB48s including both 91 and 95 RON options for all 3 ROM types found in Australia.

The remote tune service is $530 for the tune or $640 with NDSII and a cable, which is required for the tune. Ignition cut rev limiter is an extra $300.

Tuner definition pack options:

Tuner definition pack - $520

Tuner definition pack + NDSII + cable bundle - $630

Tuner definition pack + base map pack + NDSII + cable bundle - $1090

Ignition cut rev limiter option is an additional $790

All prices include GST.

More info in the posts below:

https://www.facebook.com/tidytuning/posts/122101596386166356

https://www.facebook.com/tidytuning/posts/122101608128166356

https://www.facebook.com/watch/?v=992295886231762

25/04/2025

2017-2025 TB48DE tuner definitions are now here 🎉

This has been a common request by overseas tuner definition pack customers for a long time.

There are two firmware groups for 2017-2025 models. The confirmed ROM IDs for each firmware group are:

Firmware group 6APE9EE7:
WB91A
WB91C
WB92A
WB92C
WG04B
WG04D
WG05B
WG05D
WG07D
WG08X

Firmware group 6APEERE9:
VV90A
VV91A
VV94A
WB81A
WB82A
WB93A
WB95A
WB95S
WG10A
WG14A
WG15A
WG18A

Note: Many flash tools report 6APEERE9 ROMs as 6APE9EE7 but they are different and they do need the 6APEERE9 definition.

Pricing is the same AUD$430 as the 2000-2016 models for the first two firmware groups. Pricing for existing customers or when purchased with at least two 2000-2016 firmware groups is AUD$100 per 2017-2025 firmware group.

Ignition cut rev limiter development will come soon if the 2017-2025 packs are popular enough. Please express your interest in this feature by purchasing a definition pack.

More info on tuner definition packs in the original 2000-2016 post below:

https://www.facebook.com/tidytuning/posts/pfbid0QfLeFthXJxrnxPiPHQvx881EdLLd2uzYRTMRspasHXbAuXpoMimkcQbtc8t4dtoTl

20/04/2025

NDSIII (NDS3) + cable bundles are finally here!

Suits Y62 Patrol and many other late model Nissans. Cable is backwards compatible with NDSII (NDSII license required) for the TB48DE so if you don't already have NDSII and have both a Y62 a TB48 Patrol, you can use the same cable for both vehicles.

NDSIII + cable bundle - $120 inc. GST
NDSII + NDSIII + cable bundle - $180 inc. GST

Pricing includes express post Australia-wide.

NDSIII is by far the most extensive electronic tool for the Y62 Patrol and it's far easier to use than dedicated scan tools. It does so much more than just diagnostics. The developer is very open to further development and I'll be chatting to him soon to see if we can get TPMS functionality added soon. Check out all the modules it can connect to and what it can do in the link below:

https://nisscan.com/nds-iii-windows-pc/

If you'd like to purchase a bundle, send me a message.

Tidy Tuning

16/10/2026

13/09/2026

04/11/2025

21/08/2025

24/07/2025

12/06/2025

03/06/2025

04/05/2025

25/04/2025

20/04/2025

Address

Website

Alerts

Shortcuts

Share

Category