25/05/2026
Note: Due to high demand we have just Sold out of the Diff covers we will have more arriving in a few weeks time
we still have both sway bars and trans pans in stock
2013 to Current Ram 1500 Package
Includes the Following Products:
-Hellwig Adjustable Rear Sway Bar
-Pacific Performance Engineering ZF 8-Speed Heavy-Duty Cast Aluminium Transmission Deep Pan
-Pacific Performance Engineering 9.25"-12-Bolt Heavy-Duty Cast Aluminium Rear Differential Cover
Hellwig Adjustable Rear Sway Bar
Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today's load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Features and Benefits:
-Adjustable Rate Sway Bar
-Everyday drivability and in heavy, tow/haul conditions
-Increased stiffness for improved handling, comfort and safety
-Reuses Factory End Links
-Solid, heat treated chromoly, rear sway bar
Pacific Performance Engineering ZF 8-Speed Heavy-Duty Cast Aluminium Transmission Deep Pan
Heavy-Duty Cast Aluminium Transmission Pan - Deep
Excessive heat kills transmission life. As temperature rises, transmission fluid viscosity decreases, weakening the lubricating film that protects gears and bearings. This could cause premature wear and potential failure.
Cast from high-grade A356.0-T6 aluminium alloy, the PPE transmission pan offers 2 quarts of additional fluid capacity, ensuring long-lasting heat management and performance.
The deep external cooling fins maximize the heat-wicking surface area, effectively dissipating heat to keep your transmission cool under pressure. These fins also add strength to the bottom of the pan and enhance impact resistance.
The built-in baffles at the bottom of the pan increase contact between the fluid and the cast-aluminium surfaces, enhancing heat transfer. These baffles also reduce fluid sloshing, ensuring consistent fluid pickup and stable transmission performance. Together with the longitudinal external fins, they form a stiff, cross-bracing structure, distributing loads better and increasing impact resistance.
The factory plastic pan and its non-replaceable filter must be discarded with every fluid change. In contrast, a replaceable filter bolts directly inside the PPE pan, making fluid services easier and more cost effective. The PPE drain plug is equipped with a powerful, high-temperature-rated neodymium magnet that captures ferrous metal particles, providing additional protection for your transmission.
Keep your 8-speed running longer, healthier, and cooler with PPE.
Features:
-Premium A356.0-T6 heat-treated cast aluminium alloy – a high-strength, thermally conductive material
-Precision-cast using permanent steel moulds for a smooth, consistent finish and high dimensional accuracy
-Increases fluid capacity by 2 quarts for higher thermal capacity
-Tall 3/4-inch external fins improve heat dissipation, lower transmission fluid temperature, and increase impact resistance
-Half-inch internal baffles enhance heat absorption and minimize fluid sloshing
-External fins and internal baffles work together to form an ultra-strong Cross-Bracing structure
-304 Stainless steel drain plug with built-in high temperature rated neodymium magnet and Viton O-ring
-Equipped with a 1/8-inch NPT port with pre-installed NPT plug
-Integrated filter supports ensure proper filter placement
-Compatible with OEM gasket and steel collars
-New transmission filter included
Pacific Performance Engineering 9.25"-12-Bolt Heavy-Duty Cast Aluminium Rear Differential Cover
Heavy Duty Cast Aluminium Rear Differential Cover for RAM 1500 9.25"-12
Excessive heat can degrade the protective qualities of differential fluid, leading to accelerated wear of gears and bearings. In limited-slip differentials, constant high temperatures can break down clutch packs and friction modifiers, resulting in reduced efficiency and compromised traction control.
Cast from high-grade A356.0-T6 aluminium alloy, the PPE differential cover adds .5 quart of fluid capacity and features half-inch external cooling fins for long-lasting heat management and performance.
Built-in windage scrapers inside the PPE cover ensure precise fluid distribution around the gears. By reducing excessive fluid churning, these scrapers lower heat build-up and minimize parasitic loss, promoting more efficient power transfer. Together with the vertical external fins, they form a strong cross-bracing structure that improves load distribution and enhances impact resistance.
The fill plug is precisely positioned at the factory level. Both the fill and drain plugs feature a powerful, high-temperature-rated neodymium magnet that captures ferrous particles for added protection.
Features
-Premium A356.0-T6 heat-treated cast aluminium alloy – a high-strength, thermally conductive material
-Precision-cast using permanent steel molds for a smooth, consistent finish and high dimensional accuracy
-Increases oil capacity by .5 quart for higher thermal capacity
-Half-inch external fins improve heat dissipation, lower differential fluid temperature, and increase impact resistance
-Precision-placed internal windage scrapers prevent excessive churning, reducing heat generation, fluid aeration, and power loss
-External fins and internal scrapers work together to form an ultra-strong Cross-Bracing structure
-Cast-in gussets for additional differential housing fl**ge support and increased rigidity
-304 Stainless steel service plugs with built-in high temperature rated neodymium magnets and Viton O-rings
$2,188.10 inc Gst
Located in Mentone can ship Ozwide
