Vintage Truck Supplies

09/07/2026

*New Stock* Dodge & International 'Heavies' Rear Wheel Cylinder Assembly 1-5/8" Bore".
Dodge AT4 & D5N- 500, 600 & 700 series,
International AB, C & D Line ACCO 1600 & up.

A New Wheel Cylinder Assembly To Suit the Heavier Model Dodges and International Trucks Fits Both Left & Right Hand Sides, It has 1-5/8" Bore. There are usually two of these cylinders per wheel, so if you need two or four buy four. This price listed is for just One.

08/07/2026

And here's the link to our new Petrol/ Fuel Pump for Austins and Morris Commercial with the offset bolt on fl**ge.

08/07/2026

Introducing Austin and Morris Commercial Full replacement Fuel Pump. Will fit Loadstar, WE, WF, 303, 304, FE, FFK, FG, All with 2.2 4 cyl. or 4.0 litre 6 cyl petrol engines using the Type U- AC Pump.. which is basically all those listed and more.
Find it @ www.vintagetrucksupplies.com.au

08/07/2026

Have you had troubles calling us? Here's why, our phones went down last week. Telstra repaired them. Then they went down a day later, Telstra repaired again, then they went down again... why you may ask? You won't believe it.
Some Oxygen thief has been cutting the phone lines in our area in an apparent attempt to steal the copper wire out of the ground!!! 🥴😳😳. Some people shouldn't walk amongst us.
We are back up now, very sorry if you've had problems.
Cheers

04/07/2026

G'day Restorers, can any 6 cylinder International Engine owner help me please? I need to know what size and how many Welch Plugs of each size. Important to know all, even the ones at the rear and any concealed on the front of the engine. I will provide a free set to you if you can help. Thanks.

04/07/2026

Happy Saturday Restorers. Hope you are enjoying your day.
Happy 4th of July to our U.S. friends, 250 years of independence. Have a great day.

03/07/2026

*New Parts* 8 new Carby gasket kits I've had made in Au. 🇭🇲. So these are just gaskets and sealing ring washers, no needle & seat or diaphragms (l have full kits too). Simple kits for cleaning out your Carb where you don't need to waste money on the expensive bits that often don't need replacing. I already cover most Zenith & Solex butnow have kits for carbs fitted to many American & Aussie built brands, International KB, L, AA & AR, AS series, Willys jeep, Ferguson tractor, Dodge, Plymouth, Diamond T, Federal, GMC & White Trucks 1939-1960👌🤠🇭🇲 hitting the website soon.

02/07/2026

G'day Restorers, who's giving their resto some loving this weekend? A polish, turning spanners or going for a run?
Let's see a picture.

02/07/2026

*New Part* Bedford TJ & TK Rear Hub Seals (plenty of others coming).

Here We have the newest technology in Oil Seals ready to go into your Bedford Rear Hubs when Fitted With the Single speed Axle. They are Steel Construction and covered in a Synthetic Nitrile Oil & Grease Proof coating and sporting an Inner spring to keep the Oil & Grease on the right side.

02/07/2026

G'day Restorers, l got lucky🤠, I just bought a 'Repco Seals by Progressive Size' catalogue from 1977. This has been a missing link in my attainment of correct Oil Seals for classic Trucks.
What this means-
Previously l could look up nearly any oil seal required, then, if l contacted an Oil Seal Supplier, lt was like l was talking a different language to them, as they no longer had X reference capabilities on their computer to this old numbering system. But, Now, l can look up the Exact Size and then order this way.
Coming soon, l will have all major oil seals coming into stock for your ride.
Game Changer 👍🔥😎🇦🇺