Hak fabrications

12/06/2026

With not many viable options and long wait times for certain types of kits our off the shelf FD Rx7 Stock mount intercooler upgrades are a gem. Slotting into factory position and working supporting parts like the larger style carbon ducts and retaining the factory battery location you can’t go wrong.

Performance Exhaust Centre pumping out another FD with one of our bolt in kits and showcasing the included air duct system along with the Maradyne fan setup on the inside for the extra temperature assistance.

These will be available on our website shortly however they are already available so send us a DM for any inquiries. Or send us an email [email protected]

10/06/2026

Complete package heading over to the UK we had pieced together for a customer recently and the first of our parts heading there. This kit will be used for an FX setup with no shortcuts with parts included being:

▪️Cast 347 stainless Up pipe
▪️Our NEW 3D printed modular Downpipe
▪️Complete BMRS crimped line kit
▪️Speedflow adapters
▪️Turbosmart 6466 turbo
▪️Turbosmart Hypergate 45
▪️Turbosmart Eboost 3
▪️Turbosmart FPR6
▪️Riva fuel rail
▪️Fiz Zle Y1000 intercooler
▪️Mandrel 1 piece cooler pipe kit
▪️Aeromotive fuel pump
▪️Bosch injectors

If you’re after either just Turbo parts for your Yamaha or a full tailored kit get in touch with us now through DM or [email protected] or visit the website link below ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

02/06/2026

A set of our 13B intake kits we had sent out recently both heading ti different destinations however both will be going onto FC engines using our adapter plate. Being only 8mm thick this makes it easy and still runs the inlet closer to the engine than a conventional FC lower intake.

If this is something you’re needing for your FC 13B setup or RE and REW port engine, send us a PM and we’ll sort you out. Shop our current range now from the link below ⬇️

https://hakfabrications.com/shop/by-manufacturer/mazda/hak-13b-intake-manifold-kit/

15/05/2026

And another one heading off to Florida to the guys at Elite Customs. Featuring all the go to parts to get a turbo ski prepped for speed.

▪️Cast 347 stainless water jacketed Up pipe
▪️Custom spec water jacketed down pipe
▪️Screamer pipe kit
▪️1 piece mandrel vent cooler pipe kit to suit the Fizzle Y1000
▪️Turbosmart Hypergate 45

Grab your PWC parts now from the link below ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

12/05/2026

2 separate kits we had head out the door with the first heading the USA and the second is heading locally to Queensland.

Both kits using our new investment cast 347 up pipes and one piece mandrel bent cooler pipe kits. Pictured is also our downpipe ( suit waterbox) and our self draining catch kit.

Shop these and other PWC products below ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

10/05/2026

09/05/2026

Batch of tanks we finished up this week heading out to local customers and a bunch to the US. One side being our Mazda Rx7 series 1/2/3 tanks and our VB-VS commodore fuel tanks. Both are an increase in capacity over factory, both bolt into the factory locations and both are capable of carrying up to 3 pumps.

These aren’t the only models we make so for these or any other vehicle tank replacements follow the link below ⬇️

https://hakfabrications.com/product-category/fuel-systems/fuel-tanks/

04/05/2026

One of 2 Yamaha PWC packages we have heading to QLD, with this showcasing just a few of the parts going into a full build. As shown this package consists of our new CAST 347 stainless up pipe which also comes standard to suit Precision style turbos and has an adapter ring to suite Garrett/HPT style turbos. Our self draining catch can kit with billet block off plate, mandrel bent one piece cooler pipe and brownandmiller hose and fitting kit.

Shop our range of Yamaha parts below to get your build started ⬇️

https://hakfabrications.com/product-category/by-manufacturer/yamaha/

02/05/2026

One of our Mazda FC series 4/5 Rx7 factory replacement fuel tanks on its way to the USA for a street/track car. Clean and easy upgrade for the standard unit without adequate baffling compared to the stock units and keeping everything internal while also giving access front the factory boot. These are capable of holding up to 3 39mm pumps and also utilise the standard fuel filler neck.

Grab yours now from the link below ⬇️

https://hakfabrications.com/shop/fuel-systems/fuel-tanks/mazda-fc-rx7-fuel-tank/

25/04/2026

‼️NEW PRODUCT‼️

Something we’ve been working on for a while now in the background amongst everything else and would surely bring some nostalgia. Our new FD Rx7 SMIC “Stock mount intercooler”. These are designed to work with the factory twin turbo system or even your street single turbo setups. No need to also purchase anything additional or remove the front end to install a front mount intercooler.

Construction consists of our custom 100mm thick core, billet end tanks, vacuum formed air duct and will come optional with a fan or without. Options with fans will need an AST relocation or delete and the standard cooler option will have the AST mounting bracket as standard. The kit will also include necessary silicone joiners and clamps to suit the standard turbo setup and necessary mounting hardware.

Although these aren’t available on the website yet they ARE AVAILABLE for purchase.

Kit prices start from $2550 without fan, $2750 with fan setup. Powder coating is an additional cost.