SS Racetech Rods & Customs

SS Racetech Rods & Customs SS Racetech Rods & Customs is your one-stop shop for performance car enthusiasts in Perth. Shop in store Shop in store or Online!

We offer a wide range of parts and accessories from trusted brands (Proflow dealer, Speedflow dealer, to help customize and improve vehicles.

Sometimes its the little things that can make the difference! 👊Aeroflow Performance AN steam vent adapters are specific...
05/06/2026

Sometimes its the little things that can make the difference! 👊
Aeroflow Performance AN steam vent adapters are specifically designed for the LS series engine, these cross over adapters compliment aftermarket intakes and accessories that the factory rigid brazed hard lines will not. The lines are designed to eliminate trapped air and steam from your engine to prevent hot spots and overheating. The adapter O-ring seals converts to -4 AN plumbing. Featuring fixed or swivel style adapters in dual or single variations allow optimal routing on your application which eliminates the need for T adapters.

Installing these water cross-over adapters in all 4 corners of the engine have been proven to decrease detonation in number 7 and 8 cylinders especially and are a great improvement over the standard steam vent plumbing.☁️

Proflow Water Neck, For Holden Commodore LS1/LS2/LS3, 90 Degree, Swivel, Billet Aluminium, Silver Anodised 💧👊Proflow's n...
05/06/2026

Proflow Water Neck, For Holden Commodore LS1/LS2/LS3, 90 Degree, Swivel, Billet Aluminium, Silver Anodised 💧

👊Proflow's new LS billet thermostat housings not only look good, they also come with a new high temperature Viton o-ring design, which means you don't need to use old rubber seal. They suit a standard 56mm diameter thermostat which is the same as the original LS2/LS3 versions.
Available & In Stock in the Cooling System Collection on our Website! ✅
https://racereadygear.com.au/collections/cooling-systems

Proflow Oil Filter Adapter, Sandwich Adapter, Billet Aluminium, Black Anodised, 13/16-16 in, AN10, 1/8in. NPT Port Chev ...
05/06/2026

Proflow Oil Filter Adapter, Sandwich Adapter, Billet Aluminium, Black Anodised, 13/16-16 in, AN10, 1/8in. NPT Port Chev 🚗☁️

⚡Proflow billet aluminium oil filter sandwich adapters allow you to install an oil cooler and retain your stock oil filter location. Made from high-quality billet aluminium, these adapters feature a AN10T inlet and outlet and 1/8NPT Ports for oil line feed. Proflow's billet aluminium oil filter sandwich adapters are available for a choice of applications.
In stock & Available at SS Racetech rods & Customs

Here is the prime reason why you should always use a decent quality, proper Hi Pressure Submersible fuel hose when doing...
02/06/2026

Here is the prime reason why you should always use a decent quality, proper Hi Pressure Submersible fuel hose when doing In-Tank Fuel Pump upgrades.

Proflow's PFE520 series hose is for in-tank use only. Compatible with leaded, unleaded, ethanol & methanol fuels. Sold in 1 Meter lengths.
5/16'', 1 Meter Length & 3/8'', 1 Meter Length
✅In stock and available at SS Racetech 🚗☁️

27/05/2026

Built to handle the punishment. 🇦🇺🔥

When Scott fabricates his SS Racetech Pro Buggy's, there’s no cutting corners — that’s why he will only use hose and fittings on his Australian-built cars.🇦🇺 - (the perfect Australian Pair)
Proven quality, precision engineering, and reliability you can trust when it matters most.👊

From the workshop to the track, we back products that are built to go the distance — because performance means nothing without reliability.

Need quality fittings for your own build?
SS Racetech Rods & Customs stocks a range of Speedflow Australia fittings and hose ready for your next project.

📸 We gave it the full photo shoot treatment. Every. Single. Angle. Because this Steering Shaft Support Bearing deserves ...
27/05/2026

📸 We gave it the full photo shoot treatment. Every. Single. Angle. Because this Steering Shaft Support Bearing deserves to be seen. 😏🔩 3/4" DD Heim Joint. Ford & Chev fitment. Nuts included.
And it's ready to go home with you. 👉 racereadygear.com.au
$35.50
HotRod

🔴⚫ These Proflow thru-panel battery connectors can be used wherever a battery cable goes through a firewall or other si...
27/05/2026

🔴⚫ These Proflow thru-panel battery connectors can be used wherever a battery cable goes through a firewall or other similar panel. They fit in a 1.25" diameter hole and connect with a standard 3/8" stud. Kit includes one red & black terminal. The battery jumper terminals allow a battery to be placed anywhere in the car. These allow access to the battery's terminals without accessing any body panels. Universal for 6-36 V DC applications.
Part # PFEBT-741445
💰 $82.20 AUD 🛒 Shop now → https://racereadygear.com.au/products/pfebt-741445-proflow-battery-connector-kit-thru-panel-red-black-set?keyword=PFEBT-741445

Speedflow have these 140 Series adapters in a male to male AN fitting with a 1/8” NPT port. This is a great fitting for...
27/05/2026

Speedflow have these 140 Series adapters in a male to male AN fitting with a 1/8” NPT port. This is a great fitting for senders, gauge lines or if you need to run a small hose off a tee.

Available in AN sizes -6 to -12
SS Racetech Rods & Customs
🔍 Part # 140-

Our billet aluminium throttle cable bracket solve's common installation headaches. They suit Holley 4150/4160 or 4500 se...
26/05/2026

Our billet aluminium throttle cable bracket solve's common installation headaches. They suit Holley 4150/4160 or 4500 series flanges, mount to the base of the carburettor and include integral adjustable throttle cable and return spring brackets with installation hardware.
✅ In Stock - In store & online
Part Number : PFECB4150BK

A simple upgrade that makes a big difference👊 Stainless and cotton pod filters combine high-flow performance with durabl...
25/05/2026

A simple upgrade that makes a big difference👊
Stainless and cotton pod filters combine high-flow performance with durable reusable construction, making them a smart upgrade for a wide range of street and race applications.
✔️ Offer substantially less air flow restriction than conventional pod filters
✔️ Provide great filtration
✔️ Washable & reusable
Available in a range of sizes Racetech Rods & Customs
Shop - https://racereadygear.com.au/

Address

Unit 2/71 Motivation Drive Wangara
Perth, WA
6065

Opening Hours

Monday 7:30am - 3am
Tuesday 7:30am - 3am
Wednesday 7:30am - 3am
Thursday 7:30am - 3am
Friday 7:30am - 3am

Website

Alerts

Be the first to know and let us send you an email when SS Racetech Rods & Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SS Racetech Rods & Customs:

Shortcuts

Featured

Share

Category