22/07/2026
🚨 Audi 車主注意!Audi Owners – Is Your Cooling System Due for an Inspection?
隨著車齡增加,許多 Audi 車款的冷卻系統採用高分子工程材質(Engineering Polymer)管件,長期承受高溫、高壓及反覆熱循環後,可能因材料老化而產生脆化、裂紋或滲漏,甚至突然破裂。
As Audi vehicles age, many of the engineering polymer cooling system components are continuously exposed to high temperatures, pressure, and repeated heat cycles. Over time, these components can become brittle, crack, or leak, and in some cases fail unexpectedly.
常見症狀|Common Symptoms
• 冷卻液持續減少|Coolant level keeps dropping
• 車底出現冷卻液滲漏|Coolant leaking underneath the vehicle
• 引擎室有冷卻液痕跡或結晶|Coolant residue or crystallisation in the engine bay
• 水溫異常升高|Engine temperature running higher than normal
• 冷卻液警示燈亮起|Coolant warning light illuminated
若未及時處理,可能導致引擎過熱,並增加水泵、節溫器及其他冷卻系統零件的損壞風險,造成更高的維修費用。
Ignoring these warning signs can lead to engine overheating, damage to the water pump, thermostat and other cooling system components, resulting in costly repairs.
JCEWA Auto Service 提供|Our Services
• 冷卻系統壓力測試|Cooling System Pressure Test
• 冷卻管件更換|Cooling Pipe & Hose Replacement
• 節溫器、水泵檢查與更換|Thermostat & Water Pump Inspection and Replacement
• 冷卻液更換及排氣|Coolant Flush, Refill & Bleeding
• 依原廠維修規範施工|Repairs Performed to Manufacturer Specifications
📍 Unit 2/4 Carole Rd, Maddington WA 6109
📞 0415 557 989
☎️ (08) 9459 0492
冷卻液不會無故消失,及早檢查,避免小問題演變成高額維修。
Coolant doesn’t disappear on its own. Early inspection can prevent major repairs and keep your Audi performing at its best.