CMS

CMS CMS is a dedicated early & late model Ford performance workshop specializing & performing upgrades &

Here's another one from the workshop this week a 2017 Mustang GT in for a custom dyno tune and ghost cam setup. Fitted w...
05/06/2026

Here's another one from the workshop this week a 2017 Mustang GT in for a custom dyno tune and ghost cam setup. Fitted with an Injen cold air intake and full Hurricane exhaust system, the car started out at 272 rwkW and finished up at 301 rwkW after tuning.
A gain of 29 rwkW while achieving the classic muscle car idle the owner was chasing. The customer was over the moon with the result.
Check out the video below and have a listen to the ghost cam idle.

Sydney’s Dedicated Ford Performance Specialist Since 1989.

Dyno results may vary depending on dyno type, operating conditions and overall vehicle setup.

2025, S650 Mustang GT in for tuning after receiving a Stage 1 Whipple supercharger, extractors & high-flow cats. The own...
04/06/2026

2025, S650 Mustang GT in for tuning after receiving a Stage 1 Whipple supercharger, extractors & high-flow cats. The owner carried out the installation himself and I have to say the workmanship was spot on. It's always nice seeing a customer take the time with their pride and joy. While the car was here, we also fitted billet oil pump gears and a billet crankshaft sprocket for added reliability. On the dyno, the car managed 467 rwkW, but the Michelin Pilot Sports absolutely hated the rollers. The amount of wheelspin was unreal, with rubber being thrown onto the back of the car during the runs, so the recorded figure is certainly leaving plenty on the table. After dialling in the calibration, the result was a very strong-running S650 and one very happy owner.
Thanks again for trusting CMS Sydney with the tune.

“Sydney’s Dedicated Ford Performance Specialist Since 1989.”

Dyno results may vary depending on dyno type, operating conditions and overall vehicle setup.

04/06/2026

custom exhaust with dump valve

27/05/2026

The recent engine build enquiries have definitely been keeping us busy lately.
Just a heads-up there’s no real “set price” when it comes to putting an engine package together. Every combination is different depending on the intended use, power goals, parts selection and overall direction of the build.

For that reason, it’s very hard to give accurate pricing over a quick phone call without knowing exactly what you’re trying to achieve.

If you’re genuinely looking at doing a build, send us a message or email with a rough idea of what you want to do and the sort of budget range you’re aiming for, and we can point you in the right direction from there.

Also, for those currently waiting on quotes, thanks for your patience. Most of the day is tied up tuning, workshop work and customer cars, so a lot of the quoting and build planning gets done after hours. We’re working through them as quickly as possible.

There’s a lot happening in the shop at the moment and we’ll be posting more engine content shortly, including more Mustang forced induction combinations, some serious horsepower Barra builds and a few other projects currently underway including an RS Focus production cup car.

Sydney’s Dedicated Ford Performance Specialists Since 1989.

Funny thing about engine building it’s a bit like riding a bike. You can spend years away from doing them full-time, but...
13/05/2026

Funny thing about engine building it’s a bit like riding a bike. You can spend years away from doing them full-time, but once you’re back at the bench measuring clearances, checking ring gaps, and assembling everything properly, it all comes straight back. These days I spend most of my time focused on tuning and calibration work while the boys handle a lot of the engine assembly side in-house. But with this one, I decided to jump back in myself. Nothing’s changed in the way I approach it. Measurements are still checked properly, tolerances are still verified, and nothing gets thrown together. Same attention to detail as back when I was building engines full-time. A few things I learned from some very smart engine builders over 30 years ago still find their way into these combinations today.
This one here is our ready-to-roll forged Barra 800hp entry level package

• Spool pistons & rod combo
• Balanced rotating assembly
• Standard cylinder head
• Genuine head gasket
• Standard camshafts
• Atomic head studs
• Atomic billet oil pump gears & backing plate
• Genuine new timing chain kit & tensioner
• Fresh assembly throughout

A good reminder that experience doesn’t disappear just because you step away from something for a while.

“Sydney’s dedicated Ford Performance Specialist since 1989.”

Chris’s 2020 Mustang through the workshop recently for one of our custom tuning packages. This car came in fitted with a...
09/05/2026

Chris’s 2020 Mustang through the workshop recently for one of our custom tuning packages. This car came in fitted with a cold air intake and Hurricane headers, and after spending some time working through the tune on the dyno the combination responded really well. One of the main things Chris wanted added into the calibration was switchable ghost cams using the factory steering wheel controls through integration. This allows the ghost cam feature to be turned on and off from inside the car while still retaining normal drivability when needed. We’ll attach a late night sound clip along with the final results so you can hear how the setup came together. You may notice the dyno graph isn’t perfectly smooth in parts, which was mainly due to tyre grip and the car not being strapped on the rollers during the run.
Thanks again Chris for trusting us with the car.

“Sydney’s dedicated Ford Performance Specialist since 1989.”

Dyno results may vary depending on dyno type, operating conditions, and overall vehicle setup.

Another FG GT came through the workshop over the last couple of weeks. This one was a good example of how well these Mia...
09/05/2026

Another FG GT came through the workshop over the last couple of weeks. This one was a good example of how well these Miami-powered cars still respond with the right calibration and a few simple supporting mods. The car came in running only a cold air intake, with standard headers & a cat back system, injectors and fuel system still std. We started out at just over 300rwkw and finished up at 389rwkw at the tyres on our Mainline roller dyno. At this point we’d pretty much reached the safe limit of the factory injectors and fuel pump, so we kept the calibration where we were comfortable with it from both a reliability and street-use perspective. In normal street driving, the factory system will generally cope fine as the car isn’t subjected to continuous full load conditions. Dedicated track use is a different story altogether, which is where fuel system upgrades become more important.

Thanks again Bill for trusting us with the car.

“Sydney’s dedicated Ford Performance Specialist since 1989.”

Dyno results may vary depending on dyno type, operating conditions, and overall vehicle setup.

This 2025 model S650 Mustang was booked in for a custom calibration. We started with a baseline of 260rwkw in standard f...
08/05/2026

This 2025 model S650 Mustang was booked in for a custom calibration. We started with a baseline of 260rwkw in standard form before the vehicle headed off to be fitted with Hurricane headers, high-flow catalytic converters, and a Herrod cold air intake system.
Once the hardware was completed, the car returned to us for engine & gearbox recalibration, giving the car a much more responsive and aggressive feel on the road. The end result was a final figure of 330rwkw on our Mainline roller dyno, with a power curve that continued to carry strongly through the higher RPM range.

• 2025 Mustang GT (S650)
• Hurricane headers
• High-flow catalytic converters
• Herrod cold air intake
• Custom engine calibration
• Gearbox calibration adjustments
• Final result: 330rwkW

“Sydney’s dedicated Ford Performance Specialist since 1989.”

Dyno results may vary depending on dyno type, conditions, and vehicle setup.


Every now and then, something happens that puts everything back into perspective.A customer dropped in today with a gift...
20/04/2026

Every now and then, something happens that puts everything back into perspective.
A customer dropped in today with a gift a Mustang print, a T-shirt, and a drawing his son made. Completely unexpected.
In this industry, like any other, there are highs and lows. Long hours, pressure, and plenty that most people don’t see. But moments like this cut through all of it.
It’s a reminder that what we do actually means something to people beyond just cars. Even though this gesture was handed to me personally, it’s something that reflects on our whole team, because none of it happens without the effort, care, and hard work that the crew puts in every day.
To the customer who put this together you know who you are thank you. It genuinely means a lot, not just to me, but to all of us here. There are still good people out there, and it’s things like this that make it all worthwhile.

Joe Santangelo
Riaan Bezuidenhout
Jordan Bezuidenhout
Wayne

We recently had a 2024 S650 Mustang in the workshop fitted with a Stage 2 Whipple supercharger, installed by the owner, ...
17/04/2026

We recently had a 2024 S650 Mustang in the workshop fitted with a Stage 2 Whipple supercharger, installed by the owner, who brought it in for tuning. Prior to coming in, the owner had already picked up an issue with the factory catalytic converters starting to delaminate while the car was still naturally aspirated. It’s something we’ve spoken about before, and left too long, it can turn into a much bigger problem. To address it properly, the car was fitted with a set of Hurricane headers and high-flow catalytic converters a combination we typically recommend for this level of setup before coming in for calibration. On the Mainline Rolla dyno, the car produced 473rwkw on the base run, finishing up at 508rwkw still on 98 fuel. A clean result overall, with the car now in a much better position from both a performance and reliability standpoint.

''Sydney’s dedicated Ford Performance Specialist since 1989.''
Dyno results may vary depending on dyno type, conditions, and vehicle setup.

Address

Unit 1, 25-27 Whyalla Place Prestons
Prestons, NSW
2170

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8:30am - 12:30pm

Telephone

+61298268664

Website

Alerts

Be the first to know and let us send you an email when CMS posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CMS:

Shortcuts

Share

Category