Kenex Line Marking

Kenex Line Marking Kenex Line Marking Pty Ltd, your Line Marking Experts including cleaning, scrubbing, line marking and sealing.

Kenex Stencils Pty Ltd focuses on safety line marking in factories and warehouses, complete basement packages, shopping centre car parks, schools, and anywhere you need to park or store goods or vehicles. We offer a range of additional services such as surface cleaning, mechanical sweeping, mechanical wet scrubbing, shot blasting, and sealing, signage & stenciling and all our line marking product

s are RMS approved. Our specialty is in long life line marking which has a life expectancy of five years and has been very successful in many of our factory environments.

Here’s something you don’t usually think about: every day, your line marking quietly helps prevent accidents.​A clear wa...
24/07/2026

Here’s something you don’t usually think about: every day, your line marking quietly helps prevent accidents.

A clear walkway, a well-marked forklift lane, and a crossing people can see. These keep people and vehicles apart without anyone noticing. The near-misses that don’t happen? You never hear about those.

You only notice when the lines have faded, and something finally goes wrong. Line marking is the safety measure nobody thinks about until it’s missing.

Some sites are just harder on their lines than others.A busy warehouse with constant forklift traffic. A car park that n...
21/07/2026

Some sites are just harder on their lines than others.

A busy warehouse with constant forklift traffic. A car park that never really goes quiet. A loading dock working around the clock. In a spot like that, line marking takes a beating, and if it's not built to handle it, you're back out there repainting before you know it.

That's exactly what long-life products are for. They're made to withstand heavy, constant traffic, so your lines stay clear and your site stays safe for longer between repaints.

If that sounds like your site, contact us about your requirements. And we'll walk you through the options.

We get called in to redo a lot of line marking that was only a few months old.​Almost always, the problem is the same: t...
17/07/2026

We get called in to redo a lot of line marking that was only a few months old.

Almost always, the problem is the same: the surface underneath was never properly prepared. No grinding, cleaning, or sealing. Just fresh paint over an old, dirty surface, and it peels off within months.

Good line marking begins before any paint is applied. Skip the preparation, and you'll end up paying for the job twice.

Winter has arrived! 🥶Cold, damp weather is tougher on line marking. Paint takes longer to dry, and if applied in bad con...
14/07/2026

Winter has arrived! 🥶

Cold, damp weather is tougher on line marking. Paint takes longer to dry, and if applied in bad conditions, it may not stick well and won't last as long.

We can still do marking in winter. We just need to time it better. If you have winter work coming up, contact us early, and we'll plan with the weather.

A new financial year is a natural reset point for maintenance planning.If line marking didn’t make it onto last year’s s...
03/07/2026

A new financial year is a natural reset point for maintenance planning.

If line marking didn’t make it onto last year’s schedule, now is a good time to assess what your site actually needs and factor it into new FY budget before other priorities take over.

Getting ahead of it early means the work gets done on your terms — planned around your operations, not rushed to meet a deadline.

At Kenex, our advice is based on your site’s needs — not on the most extensive or costly option available.Some environme...
30/06/2026

At Kenex, our advice is based on your site’s needs — not on the most extensive or costly option available.

Some environments genuinely benefit from long-life coatings. Others are well served by standard products. We explain our recommendations so you can make an informed decision for your site and your budget.

Whether you are looking for support on a single project or an ongoing partnership, we aim to make your job easier.

When we assess a new site, a few things consistently shape our recommendations more than anything else.The type of surfa...
26/06/2026

When we assess a new site, a few things consistently shape our recommendations more than anything else.

The type of surface and the traffic it handles. Whether there is oil residue, tyre rubber, or old paint that needs to be fixed before applying anything new. And how the facility runs daily, because that decides how work should be scheduled to reduce disruption.

These are the details that make a scope accurate and a project go smoothly.

If you are unsure about the condition of your site’s line marking or where to start, we are happy to help.Get in touch, ...
23/06/2026

If you are unsure about the condition of your site’s line marking or where to start, we are happy to help.

Get in touch, and we can talk through what you are seeing. From there, we can advise on whether a site visit makes sense or point you in the right direction based on what you describe.

Surface preparation is the most important factor in how long line marking lasts, and it varies by situation.Most sites n...
19/06/2026

Surface preparation is the most important factor in how long line marking lasts, and it varies by situation.

Most sites need mechanical cleaning to remove dirt and debris. If there is oil residue, it needs special treatment. If old paint has built up, grinding may be needed to restore a clean surface.

The right preparation depends on the surface condition and the size of the job. Doing it right the first time usually costs less than fixing problems early.

If your line marking is peeling or lifting, the issue isn't the paint — it’s the adhesion.This usually comes down to wha...
16/06/2026

If your line marking is peeling or lifting, the issue isn't the paint — it’s the adhesion.

This usually comes down to what happened before the paint was applied. Oil residue, tyre rubber, dust, or moisture on the surface stops the paint from sticking properly.

Repainting without fixing this will cause the same problem again in the same amount of time.

Proper surface preparation before reapplication is what determines whether the next job lasts.

Address

148 Magowar Road
Sydney, NSW
2145

Alerts

Be the first to know and let us send you an email when Kenex Line Marking posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share