Razor Detailing

06/04/2026

2019 Chevrolet Equinox
Hood (Aluminum) - 1 medium size sharp dent, (minor stretched) removed and reinstalled hood liner.
Two light system to cross check, making sure it’s leveled.

05/30/2026

Honda Odyssey
Left rear sliding door - 2 dents
Left quarter panel - 1 deep dent on the body edge
Right quarter panel - 1 dent, 2 crease dent (3-4 inches)
Right rear sliding door 1 dent on the panel

05/30/2026

05/24/2026

2020 Dodge Ram 3500
- multi dents all over vehicle , reconditioning

05/15/2026

2020 Honda Accord
Right front fender - 1 large dent on body line
Right rail - 1 shallow soft crease dent
Left front fender - 1 large dent on body line
Left rail - 1 large dent , 1 smaller dent
Left 1/4 panel 3 small dents

05/12/2026

2022 Alfa Stevio
Right front door (aluminum / double wall, laminated glass) - 1 dent on top of door panel.
Glue pulling all the way!

05/09/2026

2016 Ford Edge - 10-11 medium size dent on front of the hood panel, no access, double walled, glue pull whole 9 yards! (Could’ve r&i the hood next time to put on the table)

Thoughts and process
- 10 awkward dents in front of the hood with no access
- couple of rock chip, was afraid of the paint pulling or chip cracking, with all the glue pulling, but worked it out very slowly and managed to save it. Not 100% due to some areas looked a bit weak, but managed to blend 95%. Was very happy with the result. Considering the age of the vehicle.
- saved the value of the car
- it was ugly
- worked backward one way then, cross check the other way.
- curve area
- rock chips
- how long this will take
- 3-4 hours of tiring glue pulling and blending and hammering.
- chiropractor fees after 😂
- wet sand and polished
- achievement
- patience’s
- reading light
- reading metal
- reading reaction
- shadows & highlights
- pressure & accuracy
- mind boggling
- problem solving
- step by step
- time
- artwork

05/05/2026

2022 Dodge Ram 1500
Right rear door - 1 sharp dent on lower body line, no access, double walled / re-bar, had to glue pull it without damaging or pulling paint. Some of the methods which we have to take risk when no other options is possible. Thank you