Dent Remover ltd

Directions Website Contact the business

Dent Remover ltd Paintless Dent Removal or PDR as its often called, is a repair method used to repair small to large dents effectively without the need to repaint the panel

Automotive Repair Shop

31/10/2026

🚗 Can I Repair My Own Car Dent at Home?

We’ve all seen them! 👀

Those viral videos showing car dents magically disappearing with toilet plungers, boiling water, suction cups and all sorts of household gadgets!

But do these DIY dent removal tricks actually work?

🔧 The Truth About DIY Dent Removal

Removing a dent isn’t simply a case of pushing or pulling the metal until it pops back into shape.

Professional Paintless Dent Removal (PDR) requires specialist tools, precision lighting and years of experience understanding how automotive metal behaves.

⚠️ Here’s Where Things Can Go Wrong!

Using screwdrivers, excessive pressure or unsuitable tools can create sharp high spots, mis-pushes, stretched metal or even cracked factory paintwork.

And pouring boiling water over your car? Besides the risk of burns, it’s unlikely to produce a professional repair!

Just because a dent pops out doesn’t mean it’s been repaired correctly!

🎥 Don’t Believe Everything You See Online!

At Dent-Remover Ltd, we’ve been repairing dents using professional PDR techniques for nearly 20 years.

With over 400 educational PDR videos showing genuine repairs, we’re happy to demonstrate why removing dents properly takes skill, patience and experience.

From tiny supermarket dings to large, complex bodyline dents, every repair presents its own challenges.

💚 Our Advice? Leave the Toolbox Alone!

Before attempting DIY dent removal, bring your vehicle to our Beverley workshop for a FREE dent inspection.

We’ll assess the damage, explain your repair options and provide a professional quotation.

📍 Dent-Remover Ltd | Beverley, East Yorkshire

🌐 www.dent-remover.co.uk

🔧 Don’t turn a simple dent into an expensive mistake!

💚 Save your car from the bodyshop!

Can My Car Dent Be Repaired Without Painting?Yes, many car dents can be repaired without painting using Paintless Dent R...
23/10/2026

Can My Car Dent Be Repaired Without Painting?

Yes, many car dents can be repaired without painting using Paintless Dent Removal (PDR), provided the original paintwork is intact and the damage is suitable for this specialist repair process.

However, not every dent qualifies for PDR. Several important factors must be assessed before a professional technician can confirm whether a dent can be successfully repaired without traditional bodyshop methods.

At Dent-Remover Ltd in Beverley, East Yorkshire, we specialise in repairing everything from small parking dents and door dings to complex bodyline creases and larger vehicle panel damage, often without the need for filler, sanding or repainting.

What Determines Whether a Car Dent Can Be Repaired Without Painting?

Although undamaged paintwork is one of the most important requirements for Paintless Dent Removal, several other factors influence whether a successful repair is possible.

1. Dent Size and Depth

Small, shallow dents are generally excellent candidates for PDR. However, larger dents can also be repaired using specialist techniques.

The depth of the damage, the amount of metal displacement and whether the panel has been excessively stretched all influence repair suitability.

2. Dent Location

Dents on flat panels are often easier to repair than damage positioned on sharp bodylines, reinforced sections or panel edges.

However, experienced PDR technicians can frequently repair these more challenging areas using advanced techniques and specialist equipment.

3. Panel Material

Modern vehicles commonly feature steel or aluminium body panels.

Both materials can be repaired using Paintless Dent Removal, although aluminium generally requires different techniques and greater consideration of how the metal responds during the repair.

4. Access Behind the Dent

Traditional PDR involves carefully manipulating the damaged metal from behind the panel using specialist rods and tools.

Where access is restricted by internal braces, structural reinforcements or other components, Glue Pull Repair (GPR) may provide an alternative method of repairing the damage from the outside.

5. Condition of the Original Paintwork

PDR works best when the vehicle’s paintwork remains intact and securely bonded to the panel.

If the paint is cracked, flaking or badly damaged, traditional refinishing may be necessary.

However, minor paint chips or scratches do not automatically prevent a dent from being repaired using PDR. Each case requires an individual assessment.

Can Large Dents and Bodyline Creases Be Repaired Without Painting?

Yes. Large dents, sharp creases and bodyline damage can sometimes be repaired without repainting the vehicle.

These repairs are generally more technically demanding than removing a small, shallow dent.

At Dent-Remover Ltd, we regularly assess complex damage that vehicle owners may assume requires conventional bodyshop repairs.

Using specialist Paintless Dent Removal techniques, including precision metal manipulation, controlled glue pulling, tension systems and blending, it is often possible to restore damaged panels while preserving their original factory paint finish.

However, the suitability of each repair depends on the extent of the damage and the condition of the panel.

How Do I Know Whether My Car Dent Qualifies for PDR?

The most reliable way to determine whether a dent can be repaired without painting is through a professional inspection.

Photographs and videos are useful for an initial assessment and can help us understand the approximate size, position and severity of the damage.

However, photographs cannot always reveal important details such as stretched metal, subtle panel distortion, internal accessibility or the true depth of a dent.

For this reason, an in-person inspection provides the most accurate assessment of repair suitability.

Free Paintless Dent Removal Inspections in Beverley, East Yorkshire

At Dent-Remover Ltd, we offer free dent inspections at our specialist PDR workshop in Beverley, near Hull, East Yorkshire.

During your inspection, we assess:

* The size, depth and shape of the dent.
* The location of the damage and surrounding panel structure.
* Whether the panel is manufactured from steel or aluminium.
* The condition of the original paintwork.
* Accessibility for specialist PDR tools or glue pulling.
* The most appropriate repair method.
* The estimated repair time and cost.

Following the assessment, we explain the available repair options and provide a quotation using the latest PDR estimating software Dentifier

Our aim is to help vehicle owners make an informed decision about their repair while preserving the original factory finish wherever possible.

Why Choose Paintless Dent Removal Instead of a Traditional Bodyshop?

When a dent qualifies for PDR, there can be several advantages over conventional body repair methods.

✅ Preserves original factory paintwork – No need for repainting when the existing finish is suitable.

✅ No body filler required – The original metal is carefully reshaped rather than filled.

✅ Often faster repairs – Many dents can be repaired within a few hours, depending on their complexity.

✅ Potential cost savings – PDR can be more economical than conventional panel repairs and refinishing.

✅ Environmentally considerate – Avoiding repainting can reduce the use of paints, solvents and associated materials.

✅ Maintains the original panel – Helping preserve the vehicle’s factory finish and originality.

Book Your Free Car Dent Assessment at Dent-Remover Ltd

Whether your vehicle has a small supermarket parking dent, a sharp bodyline crease, an aluminium panel dent or significant panel damage, we can assess whether Paintless Dent Removal is the right solution.

With extensive experience in professional vehicle body repair and specialist PDR techniques, Martin Sadler at Dent-Remover Ltd provides expert dent assessments and repairs from our dedicated workshop in Beverley, East Yorkshire.

Don’t assume your damaged panel needs repainting or replacing before exploring the possibilities of Paintless Dent Removal.

📍 Dent-Remover Ltd – Beverley, East Yorkshire

📞 Call Martin: 07784 543932

🌐 Website: www.dent-remover.co.uk

🔧 Professional Paintless Dent Removal | Small Dents | Large Dents | Bodyline Creases | Aluminium Panels | Glue Pull Repair

Dent-Remover Ltd – Save Your Car From the Bodyshop!

Award-winning paintless dent repair in Beverley & East Yorkshire. No fillers, no repainting — just factory-finish results. 280+ 5-star reviews. Get a free quote today.

🇬🇧🇩🇪 GERMANY… ARE YOU READY? PDR EXPERIENCE 2026! 🔥🔧🚨 JUST OVER ONE WEEK TO GO – HAVE YOU GOT YOUR TICKETS?On Saturday 2...
15/10/2026

🇬🇧🇩🇪 GERMANY… ARE YOU READY? PDR EXPERIENCE 2026! 🔥🔧

🚨 JUST OVER ONE WEEK TO GO – HAVE YOU GOT YOUR TICKETS?

On Saturday 24th October 2026, I’ll be heading to Berghülen, Germany, as a Special Guest at PDR EXPERIENCE 2026, hosted by A&J Smart Repair!

If you’re involved in the Paintless Dent Removal industry, this is one event you really don’t want to miss! 👊

🔧 ONE DAY. GREAT PEOPLE. ALL THINGS PDR!

Whether you’re an experienced PDR technician, relatively new to the trade or simply passionate about dent repair, this fantastic one-day event is the perfect opportunity to:

✅ Get hands-on and try out the latest PDR tools and equipment.

✅ Meet and network with fellow dent repair technicians from across Europe.

✅ Share techniques, tips and experiences with like-minded professionals.

✅ Discover new products and innovative approaches to Paintless Dent Removal.

✅ Enjoy a great day chatting about the industry we all love!

💬 For me, that’s what makes events like this so valuable.

After nearly 20 years working in Paintless Dent Removal, I’m still learning, discovering new techniques and finding better ways to approach repairs.

Sometimes the best knowledge comes from simply having a conversation with another technician!

I’ll be travelling over from Dent-Remover Ltd in Beverley, East Yorkshire, and I’m really looking forward to meeting familiar faces, making new connections and talking everything PDR! 🇬🇧🤝🇩🇪

📍 PDR EXPERIENCE 2026

📅 Saturday 24th October 2026
📍 Berghülen, Germany
🔧 Hosted by A&J Smart Repair
🇬🇧 Special Guest: Martin Sadler – Dent-Remover UK

🎟️ DON’T MISS OUT – GRAB YOUR TICKETS!

There’s still time to get involved, so make sure you secure your place and join us for a brilliant day dedicated to the PDR industry!

Come along, say hello, try some tools and let’s talk dents! 🔨🔥

🇩🇪 Germany… SEE YOU THERE!

Small Dents Are Ideal for Paintless Dent Removal – 2026 Volkswagen Tiguan PDR RepairSmall dents and door dings are some ...
03/10/2026

Small Dents Are Ideal for Paintless Dent Removal – 2026 Volkswagen Tiguan PDR Repair

Small dents and door dings are some of the most common types of vehicle damage — and when the conditions are right, Paintless Dent Removal (PDR) can be the ideal way to repair them while preserving the vehicle’s original factory finish.

This brand-new 2026 Volkswagen Tiguan is a perfect example.

Finished in a lovely grey with black trim and wheels, the owner was understandably keen to keep it looking immaculate. Unfortunately, while washing the vehicle, the pressure-washer nozzle accidentally fired into the nearside rear quarter panel, creating two small 5mm dents.

Luckily, the factory paint was largely unharmed, with only a tiny chip caused by the steel nozzle.

Can small dents be repaired without painting?

In many cases, yes.

When the paintwork is suitable and the metal hasn’t been excessively stretched, PDR allows us to manipulate the original panel back into shape without using body filler or repainting the area.

On a nearly new vehicle like this Tiguan, retaining as much of the original factory paint finish as possible was a major reason for choosing PDR.

What if there’s no obvious access behind the dent?

This is where experience and a proper inspection become important.

Volkswagen rear quarter panels can sometimes offer useful access through removable grommets or clips around the wheel-arch area.

Not this Tiguan!

With no suitable access available there, I needed to find another safe route behind the two dents. Glue Pull Repair (GPR) wasn’t my preferred option because of the small chip around the damaged area.

After removing a side trim panel, I found electrical components behind it — but also discovered a useful opening through the inner structure leading directly towards the back of the dents.

Perfect.

Using a conventional PDR tool, I carefully located each dent from behind the panel and gradually pushed the metal back into its correct position.

Any tiny high spots created during the pushing process were then carefully tapped and blended using a hammer and knockdown.

A final polish was all that was required to finish the job.

No filler. No repainting. Original panel preserved.

The Tiguan was dent-free again in around 30 minutes — and ready for its next wash… hopefully with the pressure-washer nozzle kept a little further away this time! 😁

🔍 Repair Assessment

🚗 Vehicle: 2026 Volkswagen Tiguan
📍 Panel: Nearside Rear Quarter Panel
🔨 Damage: Two shallow 5mm dents/dings
🎨 Original Paint: ✅ Preserved – minor impact chip present
🛠 Repair Method: Paintless Dent Removal using PDR tools
🧲 Glue Pull Repair: ❌ Not used
⚙️ Panel Material: Steel
🔓 Access: Internal access located behind removable side trim
⭐ Difficulty: ⭐ Beginner-level PDR repair once access was established
⏱ Repair Time: Approx. 30 minutes
💷 Repair Cost: From £144 inc. VAT

❓Small dent on your vehicle?

At Dent-Remover, we specialise in repairing small dents using Paintless Dent Removal, preserving the original paint wherever possible.

📍 Beverley, East Yorkshire
☎️ Martin: 07784 543932
🌐 www.dent-remover.co.uk

Send photos via WhatsApp for a free, honest assessment.

Don’t automatically assume it needs filling and painting.

Even when there’s no obvious access behind the damage, an experienced PDR technician may be able to find an alternative route and repair the original panel using Paintless Dent Removal.

📍 Dent-Remover Ltd – Beverley, East Yorkshire
🚗 Small dents • Door dings • Creases • Bodyline dents • Larger & complex dent repairs

Small dent? Think PDR before paint.

2026 Ford Transit Custom Crease Dent Repair – No Paint RequiredEven a shallow crease can really stand out on a large, fl...
06/09/2026

2026 Ford Transit Custom Crease Dent Repair – No Paint Required

Even a shallow crease can really stand out on a large, flat van panel!

This 2026 Ford Transit Custom had a 220mm horizontal crease on the rear side panel after another vehicle passed too close, with its wing mirror catching the side of the van.

🔨 Why are crease dents harder to repair?

Unlike a typical round dent, a crease usually has a defined pressed line running through its centre. This needs to be carefully pushed or rolled out from behind, or repaired externally using specialist crease tabs and Glue Pull Repair (GPR).

Precision is important — one inaccurate push or pull can create additional highs and lows that then need correcting.

🧲 Why use Glue Pull Repair?

Although there was some potential access from inside the Transit, opening the rear barn door obstructed my view of the repair area. For this particular dent, GPR offered much better control.

Using specialist crease tabs and hot glue, I gradually lifted the crease, starting at the outer edges and carefully working towards the centre.

Any small high areas created during the pulls were then tapped down and blended using a hammer and knockdown until the panel was restored.

Because this crease was shallow, the repair was relatively straightforward. Deeper or sharper creases can require considerably more time and skill due to the increased metal distortion.

After around 1½ hours, the crease was removed with the original factory paint fully preserved.

🔍 Repair Assessment

🚗 Vehicle: 2026 Ford Transit Custom
📍 Panel: Rear Side Panel
🔨 Damage: Shallow 220mm Crease Dent
🎨 Original Paint: ✅ Fully Preserved – Polish Required
🛠 Method: GPR Only – Specialist Crease Tabs
🧲 Glue Pull: ✅ Precision Hot Glue Pull
⚙️ Material: Steel
🔓 Access: Limited / Braced Areas
⭐ Difficulty: ⭐⭐⭐ Intermediate
⏱ Repair Time: 1½ Hours
💷 Repair Cost: From £300 Inc. VAT

Have a dent or crease on your car or commercial vehicle?

📍 Beverley, East Yorkshire
☎️ Martin: 07784 543932
🌐 www.dent-remover.co.uk

Send photos via WhatsApp for an assessment.

Cold Glue PDR – Quick Pulls That Can Make a BIG Difference! 🔥Cold Glue has become an incredibly useful technique within ...
29/08/2026

Cold Glue PDR – Quick Pulls That Can Make a BIG Difference! 🔥

Cold Glue has become an incredibly useful technique within Paintless Dent Removal (PDR), especially when you need to quickly reduce a dent and move a larger area of metal in a controlled way.

In my latest video, I’ve put together a collection of successful Cold Glue PDR pulls from real vehicle repairs, showing just how effective this technique can be when everything comes together correctly.

⚡ Quick dent reduction
🔨 Controlled metal movement
🧊 Cold Glue PDR
🎨 No paint or filler
🚗 Real-world Paintless Dent Repair

Cold Glue can be a fantastic first stage of a repair, quickly taking the severity out of larger dents before moving on to more precise PDR techniques.

But there’s much more to getting a successful pull than simply sticking a tab onto the panel and pulling!

Panel preparation, temperature, glue condition, tab placement and understanding where the metal needs to move can all make a huge difference.

🎥 WATCH THE VIDEO HERE:
https://youtube.com/shorts/ExizcnWtsjk?is=zZPs7fHaQBySlLMC

🎓 Want to learn how I do it?

I’ve created a dedicated Cold Glue PDR Tutorial for my YouTube Members, where I take you through my own 5-step process for achieving stronger, more consistent Cold Glue pulls.

I cover panel preparation, cleaning and polishing, temperature control, preparing the Cold Glue, reading the damage and controlling each pull.

Whether you’re learning Paintless Dent Removal, already working professionally in PDR, or simply want to improve your Cold Glue technique, there’s plenty of information in the full tutorial.

👉 Join my YouTube Members section and watch the full Cold Glue PDR tutorial.

🧠 https://youtu.be/jFvgKv_McNQ?is=0-OWpu2fy1Kh09CU

Dent-Remover | Paintless Dent Removal
📍 Beverley | Hull | East Yorkshire

2022 BMW i4 M50 Small Dent Repair – No Paint RequiredSmall dent, tricky location!Not every small dent is straightforward...
22/08/2026

2022 BMW i4 M50 Small Dent Repair – No Paint Required

Small dent, tricky location!

Not every small dent is straightforward to repair, and this 2022 BMW i4 M50 is a perfect example.

The damage was a small 10mm dent high on the rear passenger door, positioned between the door handle and the edge of the panel.

Although tiny, its location made the repair challenging. Modern doors contain internal strengthening braces and handle mechanisms, which can prevent safe access to the back of a dent.

🔦 First, we check access.

Using a PDR tool and torch, I inspected behind the panel. Unfortunately, internal bracing meant there was no straightforward or safe route to reach the damage from behind.
🌟 See the image of the inside edge of the door, you’ll see 4 spot welds for the inner brace!

That meant changing the repair strategy…

🧲 Glue Pull Repair (GPR).

Because the dent was only 10mm, accuracy was extremely important. Using specialist glue tabs, the damage was carefully lifted externally without needing to dismantle the door or disturb the original paint.

PDR was particularly beneficial on this BMW due to its pearlescent paint finish. Avoiding a conventional bodyshop repair meant no colour matching, filler or repainting was required, preserving the original factory finish.

After around 1 hour, the dent was removed with a flawless result.

🔍 Repair Assessment

🚗 Vehicle: 2022 BMW i4 M50
📍 Panel: Rear Passenger Door
🔨 Damage: 10mm Small Dent
🎨 Original Paint: ✅ Fully Preserved
🛠 Repair Method: Glue Pull Repair (GPR) Only
🧲 Glue Pull: ✅ Precision Glue Pull
⚙️ Panel Material: Steel
🔓 Access: No Direct Access – Internally Braced
⭐ Difficulty: ⭐⭐⭐ Intermediate
⏱ Repair Time: 1 Hour
💷 Repair Cost: £180 Inc. VAT

Small dent on your vehicle?

At Dent-Remover, we specialise in repairing small dents using Paintless Dent Removal, preserving the original paint wherever possible.

📍 Beverley, East Yorkshire
☎️ Martin: 07784 543932
🌐 www.dent-remover.co.uk

Send photos via WhatsApp for a free, honest assessment.

🥶 How to Use Cold Glue for Paintless Dent Removal – New PDR TutorialCold Glue has quickly become one of the most useful ...
17/08/2026

🥶 How to Use Cold Glue for Paintless Dent Removal – New PDR Tutorial

Cold Glue has quickly become one of the most useful techniques in modern Paintless Dent Removal (PDR) and Glue Pull Repair.

But getting consistent results isn’t simply a case of sticking the cold glue onto a panel and pulling!

In my latest YouTube Members tutorial, I take things back to basics and show my real-world process for getting strong, controlled and repeatable cold glue pulls.

🔧 In the video I cover:

• How to correctly clean and prepare the vehicle panel
• Why I polish the paint before using cold glue
• Preparing and warming the cold glue correctly
• How temperature affects adhesion and pulling strength
• Positioning the cold glue tab over the damage
• How I perform controlled pulls to move larger areas of metal
• Common mistakes that can reduce the effectiveness of cold glue

This isn’t a demonstration on a practice panel. It’s a real vehicle repair, filmed in my workshop, showing how I use Cold Glue as part of the Paintless Dent Removal process.

Cold Glue can be incredibly effective for the initial reduction of larger dents, allowing a PDR technician to move a significant amount of damaged metal before progressing onto more precise repair and finishing techniques.

🎥 Watch my Cold Glue PDR Tutorial here:

https://youtu.be/jFvgKv_McNQ?is=xDYTlZ9hnz1CpyvR

The full video is available to Dent-Remover YouTube Members for only a couple of pounds a month or less than a MARS bar!

More coming soon! 🔨💚

Martin | Dent-Remover
Paintless Dent Removal | PDR Tutorials | Dent Repair

Selling a 2022 Audi Q2 with a Bodyline Dent  – Original Paint PreservedOur customer needed this dent repairing urgently ...
15/08/2026

Selling a 2022 Audi Q2 with a Bodyline Dent – Original Paint Preserved

Our customer needed this dent repairing urgently before selling his 2022 Audi Q2. Positioned prominently on the driver’s door, it was exactly the type of damage a potential buyer could use to negotiate the price down.
The dent measured around 60mm and crossed the factory bodyline. Bodyline dents are more challenging than flat-panel damage because the pressed styling line creates tighter, stronger metal.

🔧 No interior trim removal required.

During the assessment, I inspected through the window opening and confirmed there were no internal braces obstructing tool access.

🔨 The Repair

After cleaning the panel, I started with Glue Pull Repair (GPR) using hot glue and specialist tabs to reduce the damage. I then worked from behind the panel with specialist PDR tools, carefully reshaping the remaining dent and controlling high spots with a hammer and knockdown until the original bodyline was restored.
After around 2 hours, the dent was removed without paint, filler or replacement parts.

💷 How was the repair priced?

The £318 repair cost was calculated using Dentifier, a new PDR estimating system. It considers dent size, location, bodyline involvement and tool access. Combined with the repairer’s skillset and professional assessment, AI-assisted estimating helps produce a fair, consistent price based on repair complexity.

🔍 Repair Assessment

🚗 Vehicle: 2022 Audi Q2
📍 Panel: Front Driver’s Door
🔨 Damage: 60mm Bodyline Dent
🎨 Original Paint: ✅ Preserved
🛠 Method: Specialist PDR
🧲 Glue Pull: ✅ Initial Hot Glue Pull (GPR)
⚙️ Material: Steel
🔓 Access: Window Opening – No Trim Removal
🌟Difficulty: ⭐⭐⭐ Intermediate
⏱ Repair Time: 2 Hours
💷 Cost: £318 Inc. VAT –
Dentifier Estimated

Selling your vehicle with an unwanted dent?

Before accepting a lower price or committing to a bodyshop repair, ask us for a PDR assessment.

📍 Beverley, East Yorkshire
☎️ Martin Sadler: 07784 543932
🌐 www.dent-remover.co.uk

Send photos via WhatsApp for a free, honest assessment.



Try Dentifier PDR software and get 60 days free trial

https://www.dentifierpro.com/

🇬🇧 Dent-Remover Heads to Germany – PDR Experience 2026 🇩🇪I’m delighted to announce that I’ll be heading to Germany on 24...
09/08/2026

🇬🇧 Dent-Remover Heads to Germany – PDR Experience 2026 🇩🇪

I’m delighted to announce that I’ll be heading to Germany on 24th October 2026 as a Special Guest at PDR Experience 2026, hosted by A&J Smart Repair in Berghülen, Germany.

It’s a real privilege to be invited to an international Paintless Dent Removal event and represent Dent-Remover and the UK PDR industry.

🔧 Test. Learn. Connect.
Testen. Lernen. Vernetzen.

PDR Experience 2026 will bring together Paintless Dent Removal technicians, industry professionals and enthusiasts for a day dedicated to PDR tools, dent repair techniques, knowledge sharing and networking.

One of the things I love about the PDR industry is that you never stop learning. Tools and techniques continue to evolve, and events like this give us the opportunity to meet other technicians, exchange ideas and see different approaches to repairing dents.

I’ll be travelling from Dent-Remover in Beverley, East Yorkshire, to join A&J Smart Repair and fellow professionals from across the PDR industry.

💬 “I’m genuinely honoured to have been invited to Germany as a Special Guest. I’m looking forward to meeting everyone, talking PDR and sharing some of the knowledge and experience I’ve gained repairing everything from small dents to large, complex damage.”

📍 PDR EXPERIENCE 2026

📅 24 October 2026
📍 Berghülen, Germany
🔧 A&J Smart Repair
🇬🇧 Special Guest: Martin Sadler – Dent-Remover, UK

Whether you’re an experienced PDR technician or simply passionate about Paintless Dent Removal, it promises to be a fantastic day of tools, techniques, learning and networking.

Germany… I’ll see you in October! 🇩🇪🤝🇬🇧

Address

Unit 5n, Oldbeck Road
Beverley
HU170JW

Opening Hours

Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9:30am - 12pm

Alerts

Be the first to know and let us send you an email when Dent Remover ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dent Remover ltd:

Shortcuts

Share

Nearby cars & car services