JM Breakers

JM Breakers VAG 1.8T Spares - S3 8L Specialist

Buying / Selling / Fixing + Parts

225 + VR6 Conversions

standard A3/Cupra/MK4 rack off an 02 Cupra All working, no leaks comes with 2 brand new track rod ends £40 collected ONL...
23/06/2026

standard A3/Cupra/MK4 rack off an 02 Cupra

All working, no leaks

comes with 2 brand new track rod ends

£40 collected ONLY

Bolton BL3

Ebony Black S3 in for a replacement clutch kit due to slave failing, seeing it more and more from them being sat a coupl...
23/06/2026

Ebony Black S3 in for a replacement clutch kit due to slave failing, seeing it more and more from them being sat a couple of years

- Full LUK 3 piece clutch kit fitted
- Replacement bleed block as the clips had rotted away
- 2x replacement shafts, gave the customer the option as his boots were way past it, save on future labour charges
- Fresh power steering fluid as i always drain it when doing the clutches for ease (plus it was black)

Gearbox was cleaned whilst out as always, seems daft not too

Car back to customer 24 hours later!

19/06/2026

Hi everyone,

JM will be closed for most of the next 2 weeks and will reopen properly on 6/7/26

The backlog of my own cars, breakers and fixers is massive now and i cannot take anymore customer work on for the foreseeable future until i’m back straight again.

Multiple big jobs i’ve done in the last couple of months have gone so wrong, plus months waiting for parts for a big engine conversion i’ve got on, i’m having to call it for the time being.

If your car is already booked in, it’s still being done but following that, the garage side is shut for the next few months.

Parts won’t be affected as always.

Jack

Little K04 converted AUQ TT in for the greatest job ever….. a turbo Customer opted for a brand new recon turbo at great ...
18/06/2026

Little K04 converted AUQ TT in for the greatest job ever….. a turbo

Customer opted for a brand new recon turbo at great expense 🤣 but at least it’s been done right

Binned the gaskets that came with it as they’re terrible and used genuine elring ones and replaced all aluminium washers

Supplied and fitted a very good condition rear arm as i could stick my finger through the old one and added the K04 downpipe bracket to the subframe just to hopefully get rid of any rattle, it’s all very tight in there as the downpipe isn’t a good quality one unfortunately

FYI, if anyone thinks about using those hideous T bolt boost clamps, get fcked. They’re absolute crap and i hate them with a passion.

It’s off on a cheap car challenge to Poland now, to go to Ultrace. Enjoy!

big turbski silver LCR♻️mapped by Chris @ Volks Workshop, made 450bhpForged engine, rods, pistons, exhaust valves and sp...
17/06/2026

big turbski silver LCR♻️

mapped by Chris @ Volks Workshop, made 450bhp

Forged engine, rods, pistons, exhaust valves and springs
GT3071R turbo kit
CG race clutch
Quaife L*D
Milltek
Brembos

nice bit of kit to be honest

in order of photos:MK4 cruise control stalks £60transitioning Phenolic spacers (no bolts) £30transitioning Phenolic spac...
17/06/2026

in order of photos:

MK4 cruise control stalks £60
transitioning Phenolic spacers (no bolts) £30
transitioning Phenolic spacer with bolts £40
Forge recirc valves £50 each
SFS recirc £50
GFB+ £60
N75 pipes pair £20
DO88 rocker outlet pipe £10
Poly dogbone both ends £40
diesel red dogbone (top bush crap) £20
NEW Blue MTC upper boost pipes k04 £50
Forge cold side relocation pipe £25
Silicone K04 intakes £40 each
Black MTC K04 elbow £20
Red MTC K03 elbow £15
3” Oversize JR filter £20
3” K&N filter £15
K04 charge pipe heat shield £20
BMC CDA filters £20 each
Ramair with kit (filter not great) £40

£5 postage up to 2kg
can maybe sort a deal if you buy a few bits, thinning some older stock

Bolton BL3

Spacers:all 57.1mm CB MK4 onwards fitment in order of photos 5x100 H&R style x4 £705x100/112 25mm £305x100/112 15mm £30...
17/06/2026

Spacers:
all 57.1mm CB MK4 onwards fitment
in order of photos

5x100 H&R style x4 £70
5x100/112 25mm £30
5x100/112 15mm £30
5x100/112 25mm £30
Black 5x100/112 20mm £30

Postage £5 or £7 for multiple sets

Bolton BL3

SOLDECS Tuning BBK for rear utilises standard 256 calliper with bracket to 300mm “S4” size belled discs £160Strictly cas...
17/06/2026

SOLD

ECS Tuning BBK for rear

utilises standard 256 calliper with bracket to 300mm “S4” size belled discs

£160

Strictly cash on collection only as off my mates car

Bolton BL3

LCR FWD 256 Rear brake upgrade kit for fabias/polos/mk4s etc 2x recent ish rear callipers Brand new discs and pads £130£...
17/06/2026

LCR FWD 256 Rear brake upgrade kit

for fabias/polos/mk4s etc

2x recent ish rear callipers

Brand new discs and pads

£130
£145 posted

Bolton BL3

Great running 2.0TFSI AXX engine out of a 2005 MK5 GTIVehicle was broken due to rotComplete with loom and all ancillarie...
15/06/2026

Great running 2.0TFSI AXX engine out of a 2005 MK5 GTI

Vehicle was broken due to rot

Complete with loom and all ancillaries
turbo has no play at all
Compression was good and equal across all 4 cylinders , roughly 180psi

I would strongly suggest it has a timing chain as it has a rattle on cold start (2/3 seconds), and i would do the timing belt and water pump, clean the sump out and also have the injectors serviced due to no history with the
vehicle

£400
(+£100 palleted)

Bolton BL3

Mainland shipping only. Additional charges may apply to: AB, IV, KW, PA, PH postcodes.
video of it running can be sent via whatsapp

Address

Bolton

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 2:30pm
Saturday 9am - 12pm

Website

Alerts

Be the first to know and let us send you an email when JM Breakers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category