Honda HQ-Midlands R specialist

25/10/2026

Some of the cars we’ve had in this week! Lovely ep3 for more upgrades including, superpro castor increase front lca bushes
Braided brake lines
Discs and pads all round
Adjustable steering arms
YSR coilovers
Refurbished calipers all round
Tegiwa Carbon bonnet
Jdm front anti roll bar
Replacement exhaust manifold gasket

Fn2 in for a major service
Fuel filter
Honda type 2 antifreeze

CTDI civic in for a interim service
New drop links
Track rod ends

2 EP3’s
the first one came in for a major service, 2nd one for Hasports engine mounts.

1 litre civic in for a timing belt kit and engine service along with a engine service. All gauzes and filters along with sump removal and oil pick up cleaned and inspected on this one due to belt material starting to break down. Don’t fall behind on cambelt replacements on these as they will cause catastrophic failure.

Fk2 in for a fk8 solid flywheel and clutch kit along with Honda mtf oil change, replacement radiator clip whilst stripped down. Minor service and valve clearances. Will be seeing this one again next year for a timing chain kit

To finish off little jazz in for a major service

😎😎

19/10/2026

Tidy ep3 in today for a major service and check over 🚗💨💨

17/10/2026

CW fn2 in for a minor service and a check over . Ev1 civic in for valve clearances and a replacement knock sensor. Odyssey in for transmission oil replace. EP3 in for Sachs shocks and springs all round, replacement headlights. Minor service and a replacement radiator with Honda type2 coolant. Fk8 in for a minor service. EP3 in for a minor service. Fn2 for a replacement rear axle, powerflex axle bushes and new backing plates.

17/10/2026

Lovely fk2 we’ve had in for a huge job including

Replacement Honda head gasket
Head skim and pressure test
ARP head bolts
Timing chain, tensioner, guides, VTC actuators
4 piston racing sump baffle
Decat down pipe
Airtech engine oil cooler kit
Airtech Auxillary cooler kit
Fk8 solid flywheel
Exedy oem clutch kit
All new fluids

Now ready for a remap to accommodate the upgrades this one’s undertaken

😎😎

09/10/2026

Fk2 we currently have in for a replacement head gasket, clutch kit and fk8 solid flywheel. Stripped down yesterday now awaiting on the machine shop for the head skim and pressure test ready to re assemble next week. Ep2 we’ve had in for a replacement engine due to the original one having a popped head gasket, originally we were going to do the head gasket but after stripping down the original engine it was in a sorry state, so the better option was to replace with a 50k engine untampered with. Mk10 diesel civic in for a major service, rear pads and a check over. Then finally an fn2 with us for brake and clutch fluid flush, valve clearances, and gearbox oil change 🚗💨💨

08/10/2026

07/10/2026

Fn2 we’ve had in for a whole load of work including
Exedy stage 1 clutch kit
Toda flywheel
Rear main seal and core plug re seal
Honda MTF
New brake master cylinder
New clutch master cylinder
New clutch slave cylinder
Rear braided brake lines
Rear brake hard pipes
Brake fluid flush
Clutch fluid flush
Fuel filter
Crank pulley
Auxillary belt

Blue mk9 civic in for a major service, discs and pads all round.

Mk10 1 litre civic in for a replacement timing belt kit and a minor service

😎😎

07/10/2026

EP3 we’ve had in for a k24a3 Frankenstein swap along with having a new timing chain kit, exedy oem clutch kit, service and to fit a Tegiwa M induction kit 🚗💨💨

29/09/2026

Couple of pics I’ve managed to grab over the last few days! Special Atom in with us for a set of supercharger cams and valve clearance adjustment. 1 litre civic in for a replacement wet timing belt kit, we have phone calls all the time on these for failed turbos fault codes etc which always comes down to the belt braking up blocking oil galleries and sometimes killing the engines. Make sure these belts are changed on time along with service schedules. Lovely Honda fit in for a full service and check over for ignitionimportsltd

23/09/2026

Fk2 in yesterday for a fk8 solid flywheel exedy oem clutch kit and mtf. Along with rear discs and pads and a minor service. After removing the undertray we spotted that crusty rad clip just about holding on so replaced that whilst it was on the ramp. Fn2 in for a replacement clutch master cylinder, damper bypass hose and a slave cylinder following up with a fresh fluid flush. 1.6 idtec civic in for a major service. Fk2 in for a timing chain, tensioner, VTC gears and guides along with a major service. We also fitted an eventuri intake and rear pads 😎😎