CainePerformance

CainePerformance Cumbria's #1 Performance Specialist! ECU Remapping - AutoElectronics
www.CainePerformance.co.uk
(2)

πŸ‡©πŸ‡ͺ NΓΌrburgring 2026 βœ”οΈAnother Ring trip done and dusted, and what a weekend it's been.With all the negativity aimed at U...
21/07/2026

πŸ‡©πŸ‡ͺ NΓΌrburgring 2026 βœ”οΈ

Another Ring trip done and dusted, and what a weekend it's been.

With all the negativity aimed at UK drivers and tuners over the last few days, we just wanted to say one thing... not all of us turn up to make noise and be a nuisance.

Before we even left the UK, we removed our pops and bangs map and spent time on our in-house dyno making sure the FK2 was set up properly for reliable track driving. The goal wasn't to impress people in the car park – it was to enjoy one of the greatest driving roads in the world while respecting the place and everyone else using it.

We also came prepared. The car was packed to the roof with tools, spare tyres, brake pads and everything else we thought we might need. Turns out it was a good decision... after around 15 laps we managed to use just about all of it! That's all part of the experience, and we'd much rather be over-prepared than stranded.

The trip wasn't just about driving either. Evenings were spent enjoying steak on the stone at Pistenklause, demolishing spaghetti pizza at Pinocchio's, and we even managed to get a session on the GP circuit while we were there. Safe driving, good food and good company – exactly what these trips should be about.

We're now leaving Germany behind after a night in Frankfurt and heading off through Austria and into Italy for the rest of the week before making our way home.

A huge thank you to everyone who followed the trip, sent messages, or stopped for a chat over the weekend.

We'll be back in the workshop and fully open again on Monday 27th, ready to get straight back into building cars and writing custom calibrations.

Until next time... πŸ‡©πŸ‡ͺ🏁

NurburgringNow

🚨 MORE BOOT GLITCH ECUS NOW SUPPORTED! 🚨Following our recent announcement regarding our in-house Boot Glitch unlock serv...
07/07/2026

🚨 MORE BOOT GLITCH ECUS NOW SUPPORTED! 🚨

Following our recent announcement regarding our in-house Boot Glitch unlock service, we're pleased to confirm that even more ECUs have now been added to the supported list.

We can now unlock the following additional Bosch ECUs:

βœ… FCA Bosch MD1CS069 TC299 (Fiat Ducato)
βœ… BMW Bosch MD1CS001 TC298
βœ… Ford Bosch MD1CP006 TC298
βœ… Porsche Bosch MG1CP007 TC299
βœ… Porsche Bosch MG1CS047 TC299
βœ… Porsche / VAG Bosch MG1CS008 TC299
βœ… BMW Bosch MG1CS049 TC298
βœ… Isuzu Bosch MD1CS089 TC299

If you've been turning customers away because their ECU couldn't previously be accessed, now is the perfect time to revisit those enquiries.

πŸ”§ 2 working day turnaround
πŸ“¦ UK-wide postal service
βœ… Professionally unlocked and tested before return

Don't own Magic Motorsport Flex?

No problem.

Once the initial Boot Glitch unlock has been completed, the ECU can then be read and written in standard Bench mode using most compatible tuning tools. That means you don't need to invest in Flex hardware just to support these ECUsβ€”simply send them to us for unlocking and continue programming them with your preferred tool.

πŸ“ž Jordan: 07533 945845
πŸ“§ [email protected]
🌐 www.caineperformance.co.uk

Professional ECU Unlocking β€’ Dealer File Services β€’ Custom Calibration

🚨 **NEW IN-HOUSE ECU UNLOCK SERVICE** 🚨Following Magic Motorsport's latest Boot Glitch release, we're pleased to announc...
30/06/2026

🚨 **NEW IN-HOUSE ECU UNLOCK SERVICE** 🚨

Following Magic Motorsport's latest Boot Glitch release, we're pleased to announce that **CainePerformance** is now offering **professional in-house ECU unlocks** for dealers across the UK.

If you don't have the equipment, confidence or time to carry out the hardware modifications required to unlock these ECUs, simply send them to us and we'll take care of the rest.

βœ… 2 working day turnaround
βœ… Operating 5 days per week
βœ… Professionally handled and tested
βœ… Ready for programming on return

πŸ’· Pricing

πŸ“¦ UK Return Postage: Β£20

Standard Postal Orders – Β£80 + VAT
β€’ All non-Boot Glitch ECUs

Boot Glitch Unlocks – Β£120 + VAT
β€’ VAG Bosch MG1CS031
β€’ VAG Bosch MG1CS163
β€’ Kia / Hyundai Bosch MD1CS012
β€’ Stellantis Bosch MD1CS003
β€’ Stellantis Bosch MG1CS042
β€’ JLR Bosch MD1CP017
β€’ JLR Bosch MG1CS028
β€’ BMW Bosch MG1CS024
β€’ BMW Bosch MG1CS201
β€’ Ford Bosch MD1CS005

Advanced Boot Glitch Unlocks – Β£150 + VAT
β€’ VAG Bosch MG1CS002
β€’ All Bosch MD1CE101
β€’ Iveco Bosch MD1CS069
β€’ BMW Bosch MD1CP032

πŸ”§ Don't own Magic Motorsport Flex?

No problem.

Once we've carried out the initial unlock procedure, the ECU can then be read and written in **standard Bench mode** using most popular tuning tools that support the ECU. This means you don't need to own a Flex tool to benefit from the latest Boot Glitch protocolsβ€”simply have the unlock carried out once, then continue tuning the ECU with your preferred compatible tool.

If you're unsure which ECU your vehicle is fitted with, just send us the vehicle details or ECU part number and we'll confirm compatibility.

πŸ“ž - 07533 945845
πŸ“§ - [email protected]
🌐 - www.caineperformance.co.uk

Professional ECU & TCU Solutions β€’ Custom Calibration β€’ Dealer File Services

πŸ”₯ Magic Motorsport FLEX Tools Available from CainePerformance πŸ”₯Looking to upgrade your workshop with one of the most cap...
29/06/2026

πŸ”₯ Magic Motorsport FLEX Tools Available from CainePerformance πŸ”₯

Looking to upgrade your workshop with one of the most capable ECU & TCU programming tools on the market?

As an official Magic Motorsport distributor, we supply the full range of MMS FLEX tools, including:

βœ… OBD, Bench & Boot programming
βœ… ECU & TCU solutions
βœ… Regular protocol updates
βœ… Genuine UK support
βœ… Setup assistance and aftersales support

Whether you're just getting started or expanding an established tuning business, we can help you choose the right FLEX package for your needs.

πŸ’¬ Contact us today for our latest pricing and package deals.

πŸ“ž 07533 945845
πŸ“§ [email protected]
🌐 www.caineperformance.co.uk

Performance β€’ Passion β€’ Precision

πŸ”΄ 1999 Honda Prelude 2.2 VTEC πŸ”΄This one was an absolute stunner.A very clean example and not something you see much of t...
29/06/2026

πŸ”΄ 1999 Honda Prelude 2.2 VTEC πŸ”΄

This one was an absolute stunner.

A very clean example and not something you see much of these days, this Prelude came to us for one of our custom dyno tuning sessions after being fitted with a Hondata ECU.

As with any standalone calibration, we started with the fundamentals; sensor calibrations, ECU setup and building a solid base map before moving into steady-state tuning on the dyno.

Steady-state tuning allows us to work through the fuel and ignition tables cell by cell, refining the calibration in real time to achieve smooth drivability, consistent power delivery and optimal engine response throughout the rev range.

Once the base calibration was dialled in, we moved on to power tuning and spent the extra time extracting the performance the setup deserved.

The result was a very respectable 210hp, with excellent drivability and a calibration ready to be enjoyed.

A fantastic car, a pleasure to work on, and another happy customer.

πŸ“ CainePerformance Ltd, Ulverston
πŸ“ž 07533 945845
🌐 www.caineperformance.co.uk

Precision β€’ Passion β€’ Performance

πŸ”§ 2012 Mercedes-Benz C220 AMG πŸ”§This Mercedes came in to us as a non-starter and left with a clean bill of health after s...
26/06/2026

πŸ”§ 2012 Mercedes-Benz C220 AMG πŸ”§

This Mercedes came in to us as a non-starter and left with a clean bill of health after some electrical diagnostics and repairs.

At first glance, there wasn't much to go on. Only three fault codes were stored, all relating to two sensor signal faults and a 5V reference circuit issue.

Rather than guessing and replacing parts, we went back to basics. A quick look through the wiring diagrams, followed by some systematic testing and component isolation, soon led us to the culprit.

The EGR valve had internally shorted, effectively pulling down the entire 5V reference circuit and causing the other sensor faults to appear.

While carrying out the repairs, we also discovered several wires in the engine harness that had rubbed through over time and were beginning to cause further issues. These were repaired before they became a bigger problem.

The result? One happy Mercedes owner and another vehicle back on the road.

Proper diagnostics matter. Understanding the fault is always cheaper than guessing.

πŸ“ CainePerformance Ltd, Ulverston
πŸ“ž 07533 945845
🌐 www.caineperformance.co.uk

Precision β€’ Passion β€’ Performance

Some people sell hype. We sell results.No inflated egos. No recycled files.Just quality software and proper support.At C...
25/06/2026

Some people sell hype. We sell results.

No inflated egos. No recycled files.
Just quality software and proper support.

At CainePerformance, we don't spend our time telling everyone how good we are. We let our work speak for itself.

With over 150 workshops worldwide trusting us with their custom software, we've built our reputation on quality, consistency, and supportβ€”not social media noise.

Custom ECU & TCU calibrations, diagnostics, solutions, or dealer support, we've got the experience and infrastructure to help your business grow.

If you're ready to offer your customers something better, get in touch today and see what CainePerformance can do for your workshop.

πŸ“ž 07533 945845
πŸ“§ [email protected]
🌐 www.caineperformance.co.uk

Performance. Passion. Precision...Humble.

πŸ”΅ 2023 BMW M2 πŸ”΅This stunning BMW M2 was in with us recently for a Milltek resonator delete and brake fluid service.The c...
25/06/2026

πŸ”΅ 2023 BMW M2 πŸ”΅

This stunning BMW M2 was in with us recently for a Milltek resonator delete and brake fluid service.

The customer supplied the parts for this one, and as always, the Milltek system delivered exactly what you'd expect β€” a deeper, more aggressive exhaust note without being over the top.

A simple modification that really helps bring the S58 engine to life and gives the car the soundtrack it deserves.

While it was with us, we also carried out a brake fluid service to keep everything performing exactly as it should.

A fantastic car from the factory, made just that little bit better.

πŸ“ CainePerformance Ltd, Ulverston
πŸ“ž 07533 945845
🌐 www.caineperformance.co.uk

Precision β€’ Passion β€’ Performance

🚨 VW MD1CS104 ECU UNLOCKING NOW AVAILABLE 🚨We've got some exciting news for VAG owners...The Volkswagen MD1CS104 and MD1...
25/06/2026

🚨 VW MD1CS104 ECU UNLOCKING NOW AVAILABLE 🚨

We've got some exciting news for VAG owners...

The Volkswagen MD1CS104 and MD1CS004 ECUs, previously considered one of the more difficult ECUs to gain tuning access to, is now available for unlocking and calibration.

This ECU can be found in a range of modern Volkswagen Group vehicles, including:

βœ… Volkswagen Golf GTD
βœ… Volkswagen Golf GTI Diesel
βœ… Volkswagen Tiguan 2.0 TDI
βœ… Volkswagen Passat 2.0 TDI
βœ… Volkswagen Arteon 2.0 TDI
βœ… Volkswagen T-Roc 2.0 TDI
βœ… Volkswagen Transporter T6.1
βœ… Audi A3 35 TDI / 40 TDI
βœ… Audi Q2 / Q3 2.0 TDI
βœ… Audi A4 / A5 2.0 TDI
βœ… SEAT Leon 2.0 TDI
βœ… Ε koda Octavia 2.0 TDI
βœ… Ε koda Superb 2.0 TDI

As always, this opens the door to our full range of custom calibration services including:

πŸ”§ Stage 1 Performance Tuning
πŸ”§ Stage 2 Performance Tuning
πŸ”§ Gearbox Calibration
πŸ”§ EGR Solutions
πŸ”§ DPF Solutions
πŸ”§ AdBlue Solutions
πŸ”§ Custom Dyno Development

If you've previously been told your ECU was locked and couldn't be tuned, now is the time to get back in touch.

πŸ“© Contact us today to check compatibility and secure your tuning slot.

πŸ“ CainePerformance
🌐 www.caineperformance.co.uk

πŸ”΅ 2019 BMW M140i πŸ”΅In with us recently for one of our Street Stage 1 packages, receiving both ECU and TCU calibrations.Al...
24/06/2026

πŸ”΅ 2019 BMW M140i πŸ”΅

In with us recently for one of our Street Stage 1 packages, receiving both ECU and TCU calibrations.

Already a seriously capable car from the factory, but with the B58 engine and ZF8 gearbox working together under a custom calibration, these cars really come alive.

This one left producing approximately 400hp and 580Nm, delivering effortless performance throughout the rev range and lightning-fast gear changes to match.

A true all-round performance car and an absolute powerhouse on the road.

Another happy customer. πŸ‘Œ

πŸ“ CainePerformance Ltd, Ulverston πŸ“ž 07533 945845 🌐 www.caineperformance.co.uk

Precision β€’ Passion β€’ Performance

Address

Northlonsdale Road
Ulverston
LA129DJ

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm

Telephone

+447533945845

Alerts

Be the first to know and let us send you an email when CainePerformance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CainePerformance:

Share