CCC Detailing

28/10/2026

With Chris’s solid detailing experience, I knew I could set him some challenging tasks. A full day of sanding and polishing takes real focus, patience and commitment — and he did a brilliant job. 👏

This paint rectification training covers correct rotary polishing and sanding techniques, tackling defects such as orange peel, fisheyes, paint runs, dust nibs, deep scratches and more, before refining the finish.

Just a few clips from our first day — the warm-up! More to come, so keep an eye out for the next video. 💪

26/10/2026

Another intensive two-day Paint Rectification course completed! 💪🔥

Christopher from Precision Detail Scotland travelled all the way from Scotland for two days of hard work and intensive hands-on training. His focus and commitment paid off with brilliant results.

You’ll see what he achieved in the next few posts, so stay tuned! 👀

If you’re interested in professional, intensive, hands-on training with the advanced Kovax dry sanding system, get in touch. 🤝



Kovax Europe KOVAX Japan Richard Kok

23/10/2026

Kovax is the most efficient sanding system I’ve ever worked with. A complete system with options for every paint type and the challenges you face in paint rectification.

✅ Complete — from targeted defect removal to refining sanding marks.
✅ Fast and efficient — learn how to use it properly and you can work several times faster while maintaining the highest quality.
✅ Long-lasting abrasives — durable products that keep working effectively.
✅ Cost-effective — less time spent sanding and polishing, less product wasted and lower costs per job.

Speed, quality and savings. What more do you need?

The key is knowing which abrasive to choose, how to use it and when to move on to the next stage.

Want to understand the system and see how it can improve your everyday work? Get in touch about my one-to-one Paint Rectification training. I’ll show you exactly how I use Kovax, explain its advantages and help you get the most out of it.

21/10/2026

A few clips from Tomasz’s two-day Paint Rectification Training.

A bit of morning practice before his independent test, where he put everything he’d learnt into practice without any help. He did a brilliant job!

Interested in one-to-one training? Get in touch.

15/10/2026

Donal already has plenty of experience, so I prepared some really difficult panels for him. I wanted to give him a proper challenge and make sure he got as much as possible out of the training.

We spent hours sanding, with just one break for lunch before getting straight back to it. The paint was particularly difficult to work with, but he did really well.

There were a few mistakes along the way, but that’s part of learning. He took feedback on board quickly and corrected them. With a bit of guidance, he soon became more confident reading the paint and deciding for himself what to do next.

A long first day and a lot of work. Well done, Donal!

If you’re interested in one-to-one paint rectification and machine polishing training in Coventry, feel free to get in touch.

14/10/2026

Donal travelled from Ireland for two days of one-to-one paint rectification training here at CCC Detailing in Coventry.

He already has plenty of polishing and detailing experience, so we worked on some particularly challenging panels with poor-quality paint. Both days were packed with hands-on practice. He had a lot of work to get through and some tough tasks to tackle, but he did a brilliant job.

We used the Kovax dry sanding system throughout the training, and I shared my knowledge of the abrasives, techniques and how to approach different paint defects. Alongside the sanding, we worked on refining his polishing technique, with a particular focus on the rotary polisher.

More reels from Donal’s training will be coming soon, so you’ll be able to see what we worked on and the results he achieved.

12/10/2026

Two days of one-to-one machine polishing training with Sam at CCC Detailing in Coventry.

Sam came with no previous polishing experience, so we started from scratch: how the machines work, how to hold them, body position, balance and control. Above all, we focused on working safely and understanding what happens to the paint as you polish.

It was an intensive couple of days, with around 18 hours spent here, including 15–16 hours of hands-on practice. We covered DA and rotary polishing, cutting techniques, understanding paint defects and an introduction to Kovax dry sanding. Theory supported the practical work throughout, helping Sam understand both the process and the polishing systems he’ll be using.

For me, the priority with any beginner is to build safe working habits first. The aim is to give them a solid foundation so they can carry on practising independently, understand their results and keep improving.

Sam put a lot of effort in, and it was great to see his balance and machine control improve over the two days.

I offer one-to-one paint correction and machine polishing training for beginners and experienced detailers. DM me to discuss what you’d like to learn.

08/10/2026

06/10/2026

A lot of hours went into this Alfa Romeo Giulia Quadrifoglio, and that red looks incredible now.

Full multi-stage polishing of the paintwork, with the full front PPF also machine polished to get the best possible finish. Almost all the deep scratches were removed from the PPF, making a huge difference to how it looks.

It takes time to work through everything properly, but seeing the finished car makes it all worthwhile.

📍 CCC Detailing | Coventry
📩 Get in touch for paint polishing and ceramic coatings.