Quali sono gli orari di apertura?

Lunedì 08:00 - 17:00 Martedì 08:00 - 17:00 Mercoledì 08:00 - 17:00 Giovedì 08:00 - 17:00 Venerdì 08:00 - 17:00

RSI C6

Casa
Italia
Scorzè
RSI C6

Automotive Composites, Tuning, Racing, Enthusiast Car Parts.
(435)

23/06/2026

Most carbon intakes sell you a sound and a look.

Ours got put on the dyno by ACME: +5/7 Nm across the entire power range, with the same components installed.

A measured difference, not a promise.

On the GR Yaris, the RSI C6 intake is the starting point. The carbon engine cover and strut bar complete the bay — less weight, more rigidity, and a finish that leaves no doubt about what’s underneath when the hood goes up.

All hand-laminated in Italy since 2005.

Want an engine bay that performs as good as it looks? DM open.

18/06/2026

This interior trim yellowed, peeled, and the raw weave is now showing through.

A few months. That’s all it took.

Now look at our Clubman R55 — outside, then in. Carbon mounted over 10 years ago. Same color, same gloss, the weave still sealed tight, inside and out.

Cheap carbon cuts on resin quality and rushes the lay-up to drop the cost. You don’t see it on install day. You see it later — when it yellows, lifts at the edges, and the bare fibre breaks through.

We hand-laminate in Italy. Built to hold up for years, not to photograph well the day it goes on.

Want carbon that still looks like this after 10 years? Link in bio.

15/06/2026

Not for everyone.

If you’re looking for the cheapest carbon on the market, there are plenty of other places to look.

If you want a kit developed on a real GT3 RS, hand-laminated in Italy, with a fitment that requires zero adjustments — this is where you need to be.

Since 2005 we’ve been building carbon fibre components for people who treat their car as a project, not an accessory.

Lead time: 30–35 working days from order confirmation.
Active waitlist. Limited slots per quarter.

DM open. Send us your car’s model and spec.

09/06/2026

Sometimes, two upgrades are all it takes.

For , the transformation started with:

🏁 GP Style Rear Spoiler with Adjustable Kit
🏁 Vented Front Fenders

The result?

✔ More aggressive look
✔ Stronger motorsport character
✔ Improved airflow from the wheel arches
✔ A MINI that stands out from every other F56 on the road

No full body kit.
No extreme modifications.

Just two carefully chosen carbon fiber upgrades that completely change the personality of the car.

Handcrafted in Italy 🇮🇹

Which one would you install first?

03/06/2026

Most carbon fiber parts look similar in photos.

What you don’t see is everything that happens before the final product.

At RSI c6 every component is manufactured inside our atelier in Italy.

From carbon fiber layup to trimming, sanding, painting and polishing, every step is carried out by our team.

🏁 Made in Italy
🛠️ Handcrafted production
💎 Premium carbon fiber finishes

This is why enthusiasts around the world choose RSI c6.

👉 Which carbon fiber part would you install on your car?

27/05/2026

Two carbon fiber upgrades.
One completely transformed MINI F56.

The GP2 spoiler gives the rear a stronger motorsport-inspired look, while the wide arches solve one of the biggest visual limits of the F56: the car can look too narrow from certain angles.

Wider stance.
More aggressive rear.
A completely different presence.

Handcrafted in Italy by RSI c6 🇮🇹

25/05/2026

The new Porsche GT3 carbon fiber kit is almost here. 🏁

After months of development, testing and refinement, we are finally ready to reveal a project designed for those who want more than just an upgrade.

A complete carbon fiber transformation for Porsche GT3:⚡ aggressive design💎 real carbon fiber details🛠️ developed for precise fitment🇮🇹 handcrafted in Italy by RSI c6

Every line, every surface, every component has been created to enhance the GT3 identity without compromising its soul.

This is not just a kit.It’s a statement.

Want to receive the full Porsche GT3 brochure with all details?

Comment PORSCHE below and we’ll send it to you directly in DM. 📩

23/05/2026

Mono diffusore stile rally 2 per la tua Yaris? Lo abbiamo fatto!

Da oggi disponibile sul nostro sito (link in bio) con il codice sconto : “JANNO1” attivo solo per pochi giorni

I pezzi sono limitati.

RSIC6 gli artigiani del carbonio

Corri a prendere il tuo Upgrade (LINK IN BIO)

23/05/2026

New product drop for Toyota GR Yaris. 🔥

Introducing the RSI c6 Central Single Exhaust Extractor in real carbon fiber.

Designed for GR Yaris MK2, but also installable on MK1 for those who want a more aggressive rear setup with central exhaust style.

🏁 Motorsport-inspired rear look
💎 Real carbon fiber finish
🛠️ Developed for precise fitment
🇮🇹 Handcrafted in Italy by RSI c6

In collaboration with .

A small detail?
No.
This changes the whole rear presence.

22/05/2026

New Audi RSQ3 F3 collection is here… and the sound says everything. 🔥

In collaboration with , we tested the new RSI c6 upgrades:

🏁 Carbon Fiber Intake
💎 Carbon Fiber Engine Cover
⚡ Magnetic Paddle Shifters

The intake sound reaction?
Worth watching until the end. 👀

And yes… there’s a final surprise for everyone.

Designed, developed and handcrafted in Italy by RSI c6 🇮🇹

CarbonFiber

Indirizzo

Via Piersanti Mattarella, 59
Scorzè
30037

Orario di apertura

Lunedì	08:00 - 17:00
Martedì	08:00 - 17:00
Mercoledì	08:00 - 17:00
Giovedì	08:00 - 17:00
Venerdì	08:00 - 17:00

Telefono

+393466259999

Sito Web

https://www.rsic6.com/

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando RSI C6 pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.