06/05/2022
엘앤텍 퀵커넥터 LA100
Quick connector
The LA100 Quick Connector provides a pressure-tight connection to straight tubes and bores (internal diameter) within seconds. The manually operated connector is secured to the component by its connection seal. In this case it is important that during testing, the test piece and seals have to remain absolutely dry to ensure proper functioning and sealing. If the contact surface is stained with a lubricant such as water, the pressure should only be 1 bar or less.
【Features】
Wide range of tube tolerances
No seal adjustment required
No damage to test fittings
【Application】
Quick connector for pressure and vacuum testing of straight tubes and bores (internal diameter).
【Operating pressure PS】
3 bar（Max）
【Leak rate】
10-4 mbar·l/s (10-5 Pa·m3/s)
【Temperature range】+5℃ ～ +80℃
【Medium】Oil free air or gaseous media (please indicate when ordering)
【Material】Anodized aluminium
【Sealing material】NBR, other designs on request
【Example of use】
Insert the LA100 Quick Connector into the test piece;
Turn the handle of the quick connector for 90° to seal and apply test pressure;
At the end of the test, Turn the quick connector back to 90° and remove it.
【Go to detailed page】
=>
The LA100 Quick Connector provides a pressure-tight connection to straight tubes and bores (internal diameter) within seconds. The manually operated connector is secured to the component by its connection seal. In this case it is important that during testing, the test piece and seals have to remain...
