Autopaint

05/09/2026

XIRALIC_GALAXY_BLUE
KAPCI Coatings - كابسي للدهانات Autopaint AutoColor fans

05/09/2026

KAPCI_COATINGS
KIA_A8
KAPCI Coatings - كابسي للدهانات Autopaint AutoColor

02/09/2026

https://autopaintmk.com/product/kapci-6030-is-2k-anti-scratch-clearcoat/
Product description
Kapci 6030 is a high solids VOC compliant 2K acrylic clearcoat which can be used over Kapci Dima 9670
waterborne basecoats. It is suitable for all types of repairs and delivers high gloss and durable finish.
Substrates
Kapci 6030 HS clearcoat should be applied over Kapci Dima 9670 waterborne basecoats, Kapcibase
670/640 basecoats, and properly prepared paint work in sound conditions.

Mixing ratio by volume:
2:1:0.1-0.2
https://autopaintmk.com/product/kapci-hardeners-hs6035-0-5l/
Product description-HS HARDENER NORMAL 6035 0.5L
Kapci Hardeners are polyisocyanate based hardeners for 2K products. They are especially designed for Kapci
2K acrylic paints, Kapci MS and HS clearcoats, Latico 2K MS and HS fillers, and Kapci 2K sealers. Having
more kind of hardeners means that all painting conditions can be optimized and reliable application can be
achieved.
CHECK OUR WEBSITE
:https://autopaintmk.com/

29/08/2026

Kapci_BLUE_PEARL ,CHRYSLER_WBT_PATRIOT_BLUE_PEARL

29/08/2026

KAPCI_Blue_PEARL
CHRYSLER_WBT_PATRIOT_BLUE_PEARL
KAPCI Coatings - كابسي للدهانات Autopaint fans Chrysler Jeep

27/08/2026

KAPCI_COATINGS_MAGIC_PEARL
BMW_299_TECHNOVIOLETT-METALLIC
KAPCI Coatings - كابسي للدهانات
Autopaint Berat Rush*ti

25/08/2026

KAPCI_COATINGS
NISSAN_BS7_BLUEMETALLIC
KAPCI Coatings - كابسي للدهانات Autopaint fans Nissan

15/08/2026

15/08/2026

Kapci_PRIMABASE
KAPCI Coatings - كابسي للدهانات Autopaint fans Opel

10/08/2026

https://autopaintmk.com/product/kapci-380-aluminium-pe-putty/
Product description
Kapci 380 is 2K polyester-based putty which contains fine aluminium flakes providing increased film
thickness and resistance to vibrations. It can be used over bare steel, galvanized steel, aluminium and glass
fibre reinforced plastic (GRP) for filling of irregularities and cavities.
Substrates
Kapci 380 Aluminum PE Putty can be applied over variety of substrates such as bare metal, galvanized
original car panels, aluminium, glass fibre reinforced plastic (GRP), and properly sanded and prepared old
finishes in sound conditions. Prior to applying Kapci 380 Aluminium PE Putty, the surface should be clean
and degreased. For degreasing and cleaning of sanding dust it is recommended to use Kapci 605 Degreaser.

Drying time at 20°C:
Dry to sand: 20-30 min
The drying time and pot life of PE Putty mixed with the putty hardener will considerably
depend on temperature and the amount of the hardener used.
At lower temperature add 2-3 % of the hardener, at higher temperature add 1%.
Machine dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
Manual dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
IR Drying:
Short wave*: 5-8 min
*Guideline for short wave IR equipment. Refer to the IR equipment manufacturer’s
instruction for sets-up