XAIR Performance

XAIR Performance Manufacturer of Holden OTR Cold Air Intakes. We also sell a full range of associated Parts & Body Kits as well as installation in our Performance Workshop.

XAIR Performance Vehicles sells "Better Than Standard" Commodore's, Camaro's & Corvette's!

14/06/2026

Out the door last week was Dennis’s awesome Vf2 Ls3 powered Motorsport done only 12000km!

We fitted up the stage 7 power upgrade complete with custom grind Xair Ls3 specific cam kit including Pac Dual Valve Springs.

Also part of stage 7 is the Xair Otr intake with sound enhancer adaptor which was upgraded to the Carbon Fibre version with matching Surrounds plus pacemaker 1.7/8” headers cermokrome coated with high flow cats and twin 3” exhaust complete with Xair Custom Cannon rear mufflers.

Here’s the rundown from Zak including the dyno sheet where it cranked out a very nice 368kw at the hubs (approx 445kw at the Engine).

30/05/2026

Out the door last month was Brett’s awesome Manual Vf2 Ls3 powered Ssv redline.

We did Stage 5 way back in 2017 and this time we added our custom grind Xair Ls3 specific cam kit including Pac Dual Valve Springs plus Ls7 lifters to futureproof it for the planned Whipple supercharger later in the year!

Here’s the rundown from Zak including the dyno sheet where it cranked out a healthy 368 at the hubs (approx 440kw at the Engine).

24/05/2026

XAIR PERFORMANCE WIDEBODY VF CALAIS V STAGE 6 420KW BUILD NO 339

$59990.00

NZ New with Over $45000 in upgrades!

Original 6.0 L77 Engine, XAIR Custom Cam Kit, Heavy Duty Rollmaster Timing Chain Set, Pac Dual Valve Springs with new Collets, Retainers & Valve Stem Seals, AFM Delete Kit with Genuine LS7 Lifters, LS7 One Piece Timing Chain Dampner & Mellings Performance Oil Pump.

XAIR OTR Cold Air Intake & Infill Panel.

1.7/8" Headers into Twin 3" Exhaust with Custom Black Twin 90mm Tips.

Full Custom Dyno Tune to 345rwkw (420kw at Engine) with Dyno Sheet.

Factory VF2 Redline upgraded Brembo Front & Rear Brakes.

Monroe GT Sport Short Shocks with custom Progressive Rate Lowering Springs.

20x10" Front, 20x11" Rear Staggered Camaro Z28 Flow Form Forged Wheels in Satin Black with 275/30/20 Front & 325/25/20 Rear Tyres with Custom Tyre Lettering.

Front Bumper Lip.
XAIR VF ZL1 Bonnet.
VF Redline Rear Lip Spoiler.
XAIR Custom Widebody Rear Guards 3D Printed in ABS Plastic. Factory Guards Cut, the two Skins Rolled together then Tig Welded Up for Strength. Inner Wheel Wells Painted in Textured Anti Rust Paint, new Guards painted in Factory Prussian Steel, Bonded in Place then integrated into XAIR Maloo Style Vented Sideskirts, Rear Bumper Modified and Joined to suit.
Rear Bumper Extensions Painted in Prussian Steel / Black to match Bumper.

Full Dechrome of all Trims and Badges to Satin Black.

Low Volume Certification for all modifications.

Interior : Stock VF Calais V Premium Black Leather with Suede Trims.

All other Calais V VF features such as Heated / 3 way Memory Seats, Bose Audio, Sunroof etc.

If you're looking for a unique late model head snapping performance family friendly hotrod that's easy for anyone to jump in and drive then this is it!

All vehicles are built by our own XAIR Performance Workshop in Pukekohe. We've been in business since 2002 and only work on GM / Holden Commodore, Camaro and Corvette.

Pictured WIDE VF Number Plate can be negotiated if required.

Finance Available & will look Trade Ins.

17/05/2026

Here we have Lances Vf Ssv Cammed Wagon Xair Build No 629

This is the L77 6.0 with Active Fuel Management, which cuts 4 cylinders when cruising on light throttle.

For this reason the exhausts are very quiet out of the factory as there’s a real change in sound from the engine when it’s running on 4 cylinders!

This wasn’t the sound they were after so to wake it up we added a full stage 6 system consisting of street cam, Afm delete with new ls7 lifters, Xair Otr intake, 1.7/8” primary stainless headers with 3” outlets into high flow cats and twin 3” stainless Exhaust.

We also added the Xair Tracksport Twin Nostril / Twin Exit Vent Bonnet to complete the look!

On the Dyno it made a very nice 340kw at the rear wheels (approx 415kw at Engine!)

Here’s the run down from Ryan!

10/05/2026

Happy Mother’s Day to all the wonderful Mums out there including Linda thanks for being the amazing Xair Mum of Zak and Ryan!

Here’s a throwback to 11 years ago Mothers Day at Pukekohe Park Raceway with Dad Zak and Ryan in the Xair build No 009 Ve Manual Supercharged Cammed Ssv!

03/05/2026

Another epic Ute finished a couple of weeks back was Shashis Vf2 SsV Redline with the awesome LS3 Engine

He wanted some real V8 sound so we added our Stage 5 power upgrade consisting of Xair Carbon Fibre Otr intake with matching carbon surrounds, pacemaker headers with high flow cat pipes into twin 3” Xair ultimate exhaust complete with Custom Cannon rear mufflers and Dyno tune!

It cranked out an impressive 317kw at the hubs on the Dyno (approx 390kw at the Engine), great gains for just bolt on parts from the factory 304kw Engine!

Here’s the run down from Zak

20/04/2026

Here we have Grahams Slammed on 22” Walkys and freshly Cammed Manual Gen F Hsv R8 Maloo Ute!

Previously we had installed the stage 5 system consisting of 1.7/8” primary pacemaker headers with 3” outlets into high flow cats and stainless Xair Ultimate Twin 3” Exhaust with Cannon Rear Mufflers along with Xair Otr cold air intake.

This time around we added the Xair Street Cam Kit with Pac Dual Valve Spirngs including new collets retainers and valve stem seals and Mellings performance oil pump taking it to Stage 7

Here’s the run down from Zak including before and after Dyno sheet.

Supercars weekend Ruapuna… no Holdens racing for a long time now!Friday morning at Xair here’s 3 Black Cammed Holden SS’...
16/04/2026

Supercars weekend Ruapuna… no Holdens racing for a long time now!

Friday morning at Xair here’s 3 Black Cammed Holden SS’s - Vz Ve and Vf what’s everyone’s favorite model???
And does it change your mind if you know the Vz and Vf are Manual???

08/04/2026

Picked up last week was Steve and Mereana’s tough Vf2 Ls3 powered Ssv redline.

Lowered on the factory wheels we fitted up the stage 6 power upgrade complete with custom grind Xair Ls3 specific cam kit including Pac Dual Valve Springs including a head recondition and new ls7 lifters due to marks in the valve tips, lifters and camshaft.

Also part of stage 6 is the Xair Otr intake which they opted for the Gloss Black upgrade with sound enhancer adaptor , surrounds plus 1.7/8” headers with high flow cats with Xair Custom Cannon rear mufflers added to the existing x force 2.1/2” Exhaust!

Here’s the rundown from Ryan including the dyno sheet where it cranked out a healthy 355kw at the hubs (approx 435kw at the Engine).on 95 Fuel!

02/04/2026

Here we have Steve and Cherie’s absolutely mint rare collectable 2013 Hsv E3 R8 25th Anniversary Edition with only 20000 original Km on the LS3 Engine!

They wanted some real V8 sound from the R8 so we added our Stage 4 power upgrade consisting of Xair Otr intake with matching surrounds, 1.7/8” Ss headers with high flow cats into twin 3” ss exhaust and custom Dyno tune!

It cranked out an impressive 317kw at the hubs on the Dyno (approx 385kw at the Engine), not bad for just bolt on parts from the factory 325kw Engine plus improved economy over the rich factory tune!

Here’s the run down from Zak!

Address

Unit 7, 92 John Street
Pukekohe East
2120

Opening Hours

Tuesday 7am - 6pm
Wednesday 7am - 6pm
Thursday 7am - 6pm
Friday 7am - 6pm
Saturday 7:30am - 1pm

Website

Alerts

Be the first to know and let us send you an email when XAIR Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to XAIR Performance:

Shortcuts

Share

Category