ALTED Engineering

ALTED Engineering We specialise in structural steel fabrication and installation for homes and small commercial projects, from our beachside base in Tairua.

The finishing touches can take just as much planning as the big bits at the start.We've been involved in this Tairua new...
12/06/2026

The finishing touches can take just as much planning as the big bits at the start.

We've been involved in this Tairua new build from day one. Structural steel early in the project, and now back again helping finish things off with the final details.

So, what did we do?
- Aluminium handrails
- Powder coated to match the joinery
- Stainless steel support brackets for the timber screening

Simple, clean, and in keeping with the style of the rest of the house.

Big shout out to on this one. You've built an awesome place mate!

Great to have been involved from start to finish.

Kids in, dogs in, we're winning 🙌The new owners of this St Andrews home in Hamilton needed a gate installed quickly. Wit...
05/06/2026

Kids in, dogs in, we're winning 🙌

The new owners of this St Andrews home in Hamilton needed a gate installed quickly. With a narrow gap between the house and boundary wall, the priority was simple - keep the kids and dogs where they're meant to be. And yes, a bit of privacy and security too.

Fabricated in Tairua, the team hit the road to install a custom aluminium gate built to suit the space exactly, featuring:
- Vertical slats for privacy
- Powder coating matched to the home's joinery
- Stainless hinges fixed directly to the block wall
- A support wheel to make it easy for everyone to open and close

Strong, tidy, and built to last. Just the way we like it. 💪

Big openings. Six-metre chimneys. 450sqm+ of architectural ambition 👌This Morrinsville build with Bare Acre Builders Ltd...
27/05/2026

Big openings. Six-metre chimneys. 450sqm+ of architectural ambition 👌

This Morrinsville build with Bare Acre Builders Ltd has been a great one to be part of.

Our scope included structural steel for large-span garage openings, steel through the main living areas, and framing for one of the two six-metre-high chimneys.

And a shoutout to LAD Architecture! Bennet reckons some of the clearest drawings he’s worked from... When details are sorted upfront, fabrication and install become a whole lot smoother.

Good people. Good planning. Good outcome.

Keen to keep doing more work like this across the Waikato 💪

Not every steel project is structural. Some are more of a statement piece!For this hilltop home, the brief was clear: cr...
20/05/2026

Not every steel project is structural. Some are more of a statement piece!

For this hilltop home, the brief was clear: create functional screening that looked like it belonged with the property and surrounding architecture.

The client asked us to design and fabricate custom Corten steel panels in two locations:
- Garage screening panels
- A custom enclosure to conceal bins, gas bottles and utilities behind the sleepout - complete with a large sliding access door

To make it personal, we also incorporated the family crest into the design, converting the artwork into a laser-cutting file for the Corten steel.

Everything was modelled upfront, including hidden fixing locations and post placement, to ensure a clean finish once installed.

Big shout out to Dan and the team at Urban Homes whose crew helped make the final fitment seamless.

📸 Bennet Gage-Brown showing us the final result!

Not every install comes with fresh blueberry muffins 🧁 This one in Pauanui did! An elderly couple needed a safe way down...
05/05/2026

Not every install comes with fresh blueberry muffins 🧁 This one in Pauanui did!

An elderly couple needed a safe way down their front steps. met them on site, talked through what they needed, and designed a custom handrail to suit the deck and the height that worked for them. Hose holder welded straight onto the rail too, so the garden hose has a proper home.

One small surprise on install. When Bennet pulled up the decking planks to secure the rail, the brace beams weren't where he'd expected. No drama. Off to the store, back with what he needed, job sorted.

316 stainless steel. CNC mandrel bent tube. Built for coastal conditions, built to hold real weight.

The family lives out of town and were stoked to have peace of mind that mum and dad can safely navigate their own stairs.

Hopefully word gets around the Pauanui club 😎 We can do plenty more of these!

Most sliding gates need a ground track. This one doesn't.This is a cantilever gate. Suspended above the ground, no track...
13/04/2026

Most sliding gates need a ground track. This one doesn't.

This is a cantilever gate. Suspended above the ground, no track required. It slides on a counterbalanced frame cantilevered back behind the post, which means it works perfectly on gravel, camber, or an unfinished entrance where a standard track would catch, lift, or jam.

The fin-style aluminium infill was specified by architect Noel Jessop from for this rural Raglan build.

Flat on when you look straight through it, closed off when you hit it from an angle. Yup, it's a more complex build, but it looks pretty sharp!

This one was delivered out in the Waikato, on a site. Rural entrance, rail fencing either side, concrete sill, full powder coat.

If you've got a rural property in the Waikato or wider NZ and the entrance isn't level or sealed, a cantilever might be worth considering. Get in touch.

Big steel project up Paku 🔧And no, it wasn't the easiest site - tight access, some serious lifting involved, and did we ...
10/04/2026

Big steel project up Paku 🔧

And no, it wasn't the easiest site - tight access, some serious lifting involved, and did we mention tight access?!

We brought in the big dogs for lifting this structural steel into place. No room for second chances with portals this size. It needs to be right first time.

Working alongside Taylor Projects & Solutions on this one. Solid crew, makes a big difference on jobs like this 💪

Off-the-shelf doesn’t always cut it 🔧So we altered this set-up to get these e-bikes mounted safely on the front of the c...
31/03/2026

Off-the-shelf doesn’t always cut it 🔧

So we altered this set-up to get these e-bikes mounted safely on the front of the caravan. Solid, secure, and ready to roll.

Now it’s loaded up and ready for the good stuff…
🚐 happy campers
🚲bikes on board
😎 good times ahead

Before and after of some stainless fence components we’ve just had electropolished.These are part of a 45m stainless fen...
13/03/2026

Before and after of some stainless fence components we’ve just had electropolished.

These are part of a 45m stainless fence build, and the finish came up mint thanks to the team at Spiraweld in Auckland.

Normally we’d pickle and hand Scotch-Brite stainless, but across this much fencing that’s a lot of work to get a really consistent finish.

Electropolishing smooths the stainless surface and leaves it cleaner, brighter and more corrosion resistant - a good option for coastal builds like we see around the Coromandel.

Nice seeing the before and after on this one.




Stage 2 of this large build is now fabricated and on its way to the painters.The workshop has been flat out lately, with...
06/03/2026

Stage 2 of this large build is now fabricated and on its way to the painters.

The workshop has been flat out lately, with multiple projects moving through to keep builders on track with their timelines.

Good to see this one progressing into the next stage.

Great working alongside Taylor Projects & Solutions on this build.

🛠From CAD design through to fabrication and delivery, it’s always satisfying seeing the steel head out the gate.

Address

20 Red Bridge Road
Tairua
3795

Website

Alerts

Be the first to know and let us send you an email when ALTED Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share