Sprint RE Engineering

Sprint RE Engineering A rotary engine specialist workshop. Carrying out service work to all aspects of rotary engine builds, fabrication and full car builds.

Also all in house bead blasting, metal polishing and sheet metal fabrication and all forms of welding.

Bridgeport turbo block buttoned up . Ready to start its life as an na setup for now which will be in a very cool mazda 1...
01/07/2026

Bridgeport turbo block buttoned up . Ready to start its life as an na setup for now which will be in a very cool mazda 1000.
Eventually this will be getting boosted so we built it all to handle 💪 the grunt .

12a bridgeport block all finished up.This will be running supercharged with a pretty custom old school setup. Extra Dow...
30/06/2026

12a bridgeport block all finished up.
This will be running supercharged with a pretty custom old school setup.
Extra Dowling along with all new porting it should do the job nicely 👌

29/06/2026

Always nice to see our customers for a catch up .
Paul's epic rx3 ute still looking great and sounding amazing. Making plans for the next stage 💪

28/06/2026

Epic !

27/06/2026

A pretty special car which im sure most people in the nz rotary scene will know !
We had the pleasure to setup and tune one of our tuff sprint re 13b pp engines which didn't disappoint.
Now with a strong motor and 51mm ida which we modified with and extended fuel bowl . New fuel regulator and a couple of other mods she runs like a dream and better than ever.
One very smooth driving pp with plenty of go .
In my opinion the perfect na street car package 📦

22/06/2026

Its Monday and we are on !

07/06/2026

Had the pleasure to have this epic rx4 back in the shop.
It had completed its 1000km run in and came back for a full check over and service, while at it we removed the existing 2.5 inch exhaust and made a full new 3inch system with the aim to not only increase flow but get the overall noise down which is a trick in itself.
It came out amazing.
We also removed the stock viscous radiator fan fitting 2x eletric fans and setup on a thermo switch .
We made up some custom ignition leads and header heat shield before fitting a new custom air box to the 51mm ida .
The car now sounds amazing and goes extremely well .
We still have some more improvements in the pipeline to finish it all off but overall its a tuff street car package.

18/05/2026

Okay, so the 12a ain't all bad!

A good acid tank and clean up and we should have a good idea what we are working with... then for some machine work, ready to go into a pretty iconic car and a blower setup to boot!

Even Bud is amazed to see a time capsule 12a. Let's see what's inside! Tonka isn't fussed by the looks 🤣
18/05/2026

Even Bud is amazed to see a time capsule 12a.
Let's see what's inside!
Tonka isn't fussed by the looks 🤣

Back to buisness! Here's a serious fd track build we are full steam ahead on . 13b fd bridgeport block with a heap of c...
03/05/2026

Back to buisness!
Here's a serious fd track build we are full steam ahead on .
13b fd bridgeport block with a heap of custom fabrication going in to the bay . We are proud to be involved with Turbosmart on all our builds and this car will be a show peace once completed.
We are almost ready to strip it down for detailing, paint , powder coat, , polishing etc . Then final assembly with fluid lines and then wiring in a Haltech to run the show !

Address

31/23 Kitchener Road
Waiuku
2123

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+64273633003

Website

Alerts

Be the first to know and let us send you an email when Sprint RE Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sprint RE Engineering:

Shortcuts

Share

Category