Wallmek i Kungälv AB

Wallmek i Kungälv AB Wallmek stands for idea and design of tools. Our products are in the segments of chassis tools and li

Wallmek i Kungälv AB was started in 1978, producing and designing special tools for car repairs. Wallmek stands for idea and design of tools, up to delivery of a complete product to the customer. Our products are in the segments of chassis tools and liquid handling equipment. The Wallmek research and development department works in close cooperation with automotive workshops to ensure the best pos

sible productivity, ergonomics and health. We are very good at designing hydraulic tools that enable repairs directly on the car, handling of fuel when tank repairs are necessary and to make drainage systems for car dismantlers. Today Wallmek is developing tools directly for car manufacturers, the aftermarket and garages. For the car dismantling industry, we develop tools for draining all liquids from the cars to make them environmentally decontaminated. As the company continues to expand, we are now also involved in customer segments like trucks, trailers and constructions machinery. In short terms – we develop Wallmek in a direction where our products make the best use for our customer. Our mission

To develop, produce and market our cost effective tools to our customers. Important for us:

Quality! – To exceed the customers expectations. Design! – Ergonomic, well thought out and functional products. Customer care! – Being present and always available for support. Welcome to Wallmek i Kungälv AB
Sten Johansson
Managing Director

03/07/2026

🚛 Seized kingpins? Meet the solution. 💥
Removing stubborn kingpins doesn't have to mean excessive heat, endless hammering, or removing the entire axle.
The Wallmek 03-00048 Universal Kingpin Set combines up to 70 tons of hydraulic force with our unique impact function to break loose even heavily seized kingpins – directly on the vehicle.
✔️ Straight & tapered kingpins
✔️ Up to 70 tons of force
✔️ Reduced workshop downtime
✔️ Faster, safer and more controlled repairs
Built for professional workshops that demand performance every day.
🎥 Watch the full video on our YouTube channel.

💥 NEW: Wallmek 01-00060 Hydraulic Cylinder – 22 Tons of Power. Only 2.9 kg.Better performance. Better durability. More p...
29/06/2026

💥 NEW: Wallmek 01-00060 Hydraulic Cylinder – 22 Tons of Power. Only 2.9 kg.
Better performance. Better durability. More power. Wallmek quality.
Meet the next generation of hydraulic workshop cylinders. The new 01-00060 combines an impressive 22-ton pushing and pulling force with a compact design weighing just 2.9 kg.

✔ Only 2.9 kg – easier to handle every day.
✔ Optimized 60 mm stroke for the most common wheel bearings and bushings.
✔ Patented adjustable press rod system using a standard 3/8" extension.
✔ Automatic return piston for faster operation.
✔ Compatible with Wallmek M10–M22 draw bars.
✔ Designed for professional workshops.
Built for demanding jobs where reliability, speed and safety matter. And when extra force is needed, combine hydraulic and impact power with Wallmek punching sockets and punching nuts. 22 tons. 2.9 kg. Unlimited possibilities.

24/06/2026

Something powerful is coming...
For years, workshop professionals have relied on hydraulic force to tackle stubborn wheel bearings, bushings and suspension components. Now it's time for the next step.
More power. Better usability. Smarter design.
A new generation of hydraulic performance is about to arrive.
Launching in 5 days.

17/06/2026

🔧 Rear wheel bearing replacement made easy.

The rear wheel bearing is replaced directly on the car without time consuming dismantling. This bearing is a 92 mm compact type, also called HBU 2.1 or generation 2. Improper installation can damage the bearing before the vehicle even leaves the workshop.

The Wallmek 02-00012 Rear Wheel Bearing Set is designed to make the job faster, safer and more reliable.

✅ Replace the bearing directly on the vehicle.
✅ Designed for both solid and open hub designs.
✅ Ensures the new bearing is pressed using the correct outer race.
✅ Dedicated mounting ring provides precise bearing positioning.
✅ Includes a 300 mm M22/20 drawbar for use with Wallmek hydraulic cylinders.

Compatible with:
• Peugeot Expert & Traveller
• Citroën Jumpy & Spacetourer
• Toyota Proace & Proace Verso
• Opel Vivaro C & Zafira Life
• Fiat Scudo & Ulysse

The majority of the kit components can also be used for many other compact wheel bearings, making it a valuable addition to any professional workshop.

Correct installation. Reduced repair time. Professional results.

15/06/2026

🔧 Stuck 6 or 8 bolt wheel hubs? Not anymore.

Rusted and seized hub assemblies can turn a straightforward repair into hours of unnecessary work. The Wallmek 01-00045 Hub/Bearing Puller is designed to solve exactly that problem.

✅ Remove stubborn bolted hub units directly on the vehicle.
✅ In many applications, the axle shaft can remain in place.
✅ Eliminate unnecessary dismantling, heating and heavy hammering.
✅ Hydraulic pulling force of up to 22 tons when combined with a Wallmek cylinder.

Perfect for many popular 4x4 and commercial vehicle applications, including:
Mitsubishi, Toyota, Nissan, Mazda, Dodge, Chevrolet, GMC and Ford.

The tool mounts directly to the hub using the vehicle's own wheel bolts or nuts and works together with the 01-00046 Bearing Puller and Wallmek hydraulic cylinders for a fast and professional repair.

Less dismantling. Less downtime. More productivity.

10/06/2026

GENERATION 3 WHEEL BEARINGS - EXTENSIONS SET
Bolted-on bearings (Often used in aluminium knuckles but are also frequently used in steel knuckles). The small tolerance in combination with long guiding into the knuckle causes huge problems after some years when removing the bearing.

To avoid damaging and to avoid removing the wheel knuckle use the following tools: Disassembly/pressing out (takes approx. 10 minutes, leave the driveshaft in place)

✔ Remove bearings in approximately 10 minutes
✔ Leave the driveshaft installed
✔ Reduce dismantling time
✔ Minimize risk of damage

Recommended tools:
01-00026,01-00027 or 01-00047.
(01-00026-020, 01-00027-020, 01-00047-020, 01-00040, 01-00042-B, 01-00042-010, 01-00042-011)

05/06/2026

Gen 2 - Extension kit. Tools for wheel bearing replacement.
The most common wheel bearing design found in today's vehicles.

Compact wheel bearings (HBU 2.1) have been installed in millions of vehicles since 2002 and are widely used by manufacturers including Ford, Volvo, Volkswagen Group, Toyota, Mercedes-Benz and many others.

The biggest challenge?
Incorrect installation can damage the bearing internally or destroy the ABS magnetic ring before the vehicle even leaves the workshop.

Using the correct installation tools ensures proper load distribution and a reliable repair.

✔ Correct installation
✔ Protect the ABS magnetic ring
✔ Avoid premature bearing failure
✔ Save time in the workshop

Recommended tools:
🔧 20-00015 Extension Set
🔧 01-00041
🔧 01-00033-020
🔧 1090-25 Series

03/06/2026

GENERATION 1 WHEEL BEARINGS

Still one of the most common wheel bearing designs on the road.
Generation 1 bearings have been used since the 1970s and continue to be found in many modern vehicles.
Using the right tools allows the bearing to be replaced directly on the vehicle, eliminating time-consuming work in a shop press and reducing the risk of damage.

✔ Work directly on the car
✔ Faster repairs
✔ No unnecessary dismantling
✔ Suitable for front and rear wheel bearings

Recommended tools:
🔧 20-00011 Wheel Bearing Set
🔧 01-00035
🔧 01-00035-100
🔧 01-00037

Developed by mechanics. Proven in field.

22/05/2026

Fast and Powerful Replacement of Bushings and Ball Joints
Let your workshop work smarter, faster, and safer.
This starter kit is designed for efficient replacement of bushings, ball joints, and other press-mounted components – whether you’re working with passenger cars, SUVs or heavy vehicles.

With the strong open press block and precision-engineered adapters, you can replace a ball joint or bushing in just 5–10 minutes, reducing downtime and increasing productivity. All components are built for repeated, high-load use, making this kit a long-term investment for any professional workshop.

Key Features:
✅ Replace bushes and ball joints on the car
✅ Eliminates risk of damage from hammering
✅ Protects delicate components
✅ Faster, safer, and more controlled workflow

20/05/2026

🔧 Tough Ford Transit ball joints? No problem.
Our Ball-Joint Set for Ford Transit 2014– is built for heavy-duty workshop use – efficient, safe, and precise.
✅ Dismantles steering knuckle ball joints – with or without bolt fastening
✅ Up to 18 tons of pressing force directly on the housing
✅ No pulling force on threads – no damage
✅ Includes a hole saw cutter for clean disassembly
Even heavily rusted joints are no match when used with press frame 1090-55-C and a hydraulic cylinder. Check it out and see how 02-00016 works 🔍

Adress

Barnebergsgatan 35
Kungälv
44240

Öppettider

Måndag 07:00 - 16:00
Tisdag 07:00 - 16:00
Onsdag 07:00 - 16:00
Torsdag 07:00 - 16:00
Fredag 07:00 - 15:00

Telefon

+4630358580

Webbplats

Aviseringar

Var den första att veta och låt oss skicka ett mail när Wallmek i Kungälv AB postar nyheter och kampanjer. Din e-postadress kommer inte att användas för något annat ändamål, och du kan när som helst avbryta prenumerationen.

Kontakta Affären

Skicka ett meddelande till Wallmek i Kungälv AB:

Genvägar

Dela

Typ