Keepin It Classic Automotive Restoration

09/21/2026

Keepin It Classic is in search of an Auto Body Professional. Duties would be rust repair, panel changes, drilling out spot welds, welding sheetmetal, blasting and block work.

We are located in Albion Michigan.

Pay will be based on experience and craftsmanship. If you paint as well the that would be a plus. Range 30-40/hr.

If you have experience and can do A1 body work contact Don Hamilton at call or text 517-250-0440

09/11/2026

1967 GTO real 242 car has standard shift pedals in it.
Customer is looking to sell. 25k obo
We brought this in as it had been sitting for about 3 years and needed a few things. Fuel pump, filter, fuel regulator, some electrical work,couple new bumpers, trans linkage and some brake work.

Car has a high compression SBC with auto trans, street slicks, roll cage, really nice interior. Only drove it to make sure it shifts properly. It’s an old school drag car. Everything seems to work runs good. Runs on 110 fuel. Was told it’s 13:1 CR.

If interested call or text me at 517-250-0440 and I’ll get you in touch with the owner.

09/08/2026

Please share!

We are located in Albion Michigan.

We are looking for a restoration technicion with strong sheetmetal fabrication and block work skills. Pay is based on. Quality and craftsman ship. Start off pay will range from $30-35/hr and up depending on quality and craftsmanship.

Give Don Hamilton a call at 517-250-0440

09/05/2026

How many of these have you seen in the past 10 or even 20 years?

It’s a 1964 Ford Falcon 4 door wagon! Original colors, original 260 v8. We are converting from the original “3 on the tree” to “4 on the floor”! We are also adding bucket seats instead of the bench seat and a custom tilt column.

This wagon has undergone extensive rust repair throughout the car but it’s a nice solid car now! Lots of hand fabrication as you can’t buy many of the sheet metal parts off the shelf for this one.

It’s one of those cars that everyone will be drawn to at the shows over the typical mustang or Camaros for sure! Ford never made them this nice!

We are in the final stages of the build and we will share more later this month!

07/05/2026

07/05/2026

WE’RE HIRING – CLASSIC CAR PEOPLE WANTED!

If you love old cars, take pride in your work, and believe in showing up every day ready to get the job done, we want to talk to you.

We’re looking for good, honest people who are dependable, easy to work with, and enjoy bringing classic cars back to life.

🔧 Mechanic
We’re looking for someone who knows their way around older cars and can:

Tune and work on carburetors
Set valve lash
Diagnose and repair wiring issues like gauges, lights, charging systems, and other electrical problems

🛠 Body Technician
We’re looking for someone who can:

Replace quarter panels, floors, and trunk pans
Do straight, high-quality bodywork and exceptional block sanding
Paint experience is a bonus, but not required

No certifications needed. We’re more interested in what you can do.

If you’ve built or restored your own cars, have experience in more than one area, or just take pride in doing quality work, we’d love to meet you.

We’re looking for people who care about the finished product.

Pay will be $25-$35/hr depending on experience.

Contact Don Hamilton at 517-250-0440

05/22/2026

It’s been a little while since we’ve updated so I’ll share a few projects that we have going.

1st is a 1967 RS/SS Camaro convertible. Pretty solid car. It does need rear quarters which we will be installing. This will have a SBC pushing a little over 400hp with a Muncie close ratio 4 speed. It will be a fun car. It came factory with the deluxe interior as well.

2nd is a 1964 ford falcon 4 door wagon. It’s getting a full restoration as well. This is a 260 v8 car with a 4 on the floor also! We had to hand fabricate the rear quarters and dog legs as well as a new spare tire well. We installed a full floor pan in the car too. This one will be skylight blue (similar to baby blue) with a two tone navy and light blue bucket seat interior just like it should have been in 1964!

If you are a respectful, knowledgeable mechanic that knows his or her way around the classic cars and would like a career change give us a call! Contact Don Hamilton at 517-250-0440

05/22/2026

1965 Mustang Fastback 2+2 came in needing some love. The car sat for a while and needed brakes, tires, fuel gauge and horn fixed along with fluids etc. It’s back with the customer and being enjoyed!

If you have a classic car that needs a few items updated and just don’t have the time or tools contact us. We can get you back on the road!

Also if you’re a respectful hardworking mechanic that knows and enjoys the classic cars contact us! We may have a spot for you!

Contact Don Hamilton at 517-250-0440

03/20/2026

We have an opening for a general laborer who is passionate about classic cars and possesses a strong work ethic. Although a license is not required, some mechanical experience is beneficial. Our location is in Albion, MI. To discuss this opportunity further, please contact Don Hamilton at 517-250-0440.

03/11/2026

HIRING!

Keepin’ It Classic is looking for a dedicated, hardworking employee that is quality focused and has experience with classic cars. If you build cars as a hobby this is probably the job for you.
We are located in Albion Michigan and our hours are M-F 8-4:30. Competitive pay, paid holidays and vacation time. We do not work weekends.

Please share!

If interested and would like more details or to schedule an interview contact Don Hamilton at 517-250-0440.