JCM Maintenance, LLC

JCM Maintenance, LLC JCM Equipment Maintenance is a full service repair and maintenance company. Repairing trucks and he

What We've Been Working OnWhile we haven't posted much lately, we've been busy doing what we do best—keeping trucks and ...
06/01/2026

What We've Been Working On

While we haven't posted much lately, we've been busy doing what we do best—keeping trucks and equipment working.

Over the last few weeks our team has been handling:

✅ Engine overhauls
✅ Dump truck repairs
✅ Brake and axle work
✅ Heavy equipment service
✅ Fleet maintenance and inspections
✅ Electrical and diagnostic repairs

Whether it's a newer fleet vehicle or a piece of equipment that's been working for decades, our goal is the same: get it repaired correctly and back to work.

Thank you to all of our customers who continue to trust JCM Maintenance with their trucks and equipment.

If you have a truck, piece of equipment, or fleet vehicle that needs attention, give us a call.

📍 Batavia, Ohio
📞 513-732-3333

JCM Maintenance, LLC
Keeping Trucks & Equipment Working Since 1989.

If you plow snow, you already know — waiting until fall is a mistake.We’re offering FREE installation on all in-stock Sa...
02/25/2026

If you plow snow, you already know — waiting until fall is a mistake.

We’re offering FREE installation on all in-stock SaltDogg spreaders right now.

No backlog. No scrambling. No rushed installs before the next snow.

📍 Batavia, OH
📞 Call us to check availability.

02/19/2026

We didn't just set the latest flatbed build on fire or did we?

No worries this is an AI generated video.

🚨 Keep an eye out in Clermont County… 🚨Our latest flatbed build is about to be maneuvering around town.What started as a...
02/19/2026

🚨 Keep an eye out in Clermont County… 🚨

Our latest flatbed build is about to be maneuvering around town.

What started as a simple request turned into a sharp, functional unit:

✔️ Retired ambulance chassis
✔️ Custom flatbed with removable gates
✔️ Tuck-under liftgate

Next stop: lighting install with another vendor.
Then it’s coming back home for new underbody toolboxes to finish it off.

Simple. Clean. Built to work.
This was built for one of our very good EMS customers.

If you see it rolling around, snap a picture and tag us 👀

Even the boss had to get out and help a municipal customer today. This vac truck was stuck in work mode, we found an air...
01/21/2026

Even the boss had to get out and help a municipal customer today. This vac truck was stuck in work mode, we found an air over electric solenoid that had failed. One of our parts drivers was close by the parts vendor and we had this unit up and running within a few hours.

This is a great deal!
01/12/2026

This is a great deal!

A competitively priced TGS03 spreader with vi****or is available for $2150.00, including everything required for installation. This unit, previously installed by JCM, saw usage by a customer for two events before being upgraded to a SHPE V-box. Comparable units without vi****ors are listed at $2450.00.

This Ford got an early Christmas present today. Check out this all electric SaltDogg under tailgate spreader. This unit ...
12/18/2025

This Ford got an early Christmas present today. Check out this all electric SaltDogg under tailgate spreader. This unit should be up for the challenge for many years.

Thanks to FreshRags for the updated hoodies for our employees.  Shane did an amazing job changing up the logo and pushin...
12/15/2025

Thanks to FreshRags for the updated hoodies for our employees. Shane did an amazing job changing up the logo and pushing out 24 in a hurry for the Christmas 🎄 party this past Saturday. If you are looking for any kind of custom hoodies, shirts and hats fresh rags should be your go to! All our employees loved their gifts!

We're using our F350 Super Duty as a bit of a demo truck these days. Today we installed a new custom built American Truc...
12/11/2025

We're using our F350 Super Duty as a bit of a demo truck these days. Today we installed a new custom built American Truckboxes LLC fender box in the bed. If you could use a well built toolbox like this get in touch! They can build a box to fit your needs, this is American Made quality and not some China junk! If you want to take a look in person reach out, (513) 732-3333.

Our F350 & SnowDogg HD75II w/ Wing kit out putting in the work this morning.
12/02/2025

Our F350 & SnowDogg HD75II w/ Wing kit out putting in the work this morning.

Address

4000 Roudebush Lane
Batavia, OH
45103

Opening Hours

Monday 8am - 5:30pm
Tuesday 8am - 5:30pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm
Saturday 8am - 12pm

Telephone

+15137323333

Alerts

Be the first to know and let us send you an email when JCM Maintenance, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JCM Maintenance, LLC:

Share