Gulfside Armor Co.

10/20/2026

When one of your sponsors trusts you with his brand new car, you bring your A game. Chris's 2026 Lexus GX 550 got the full Gulfside treatment before the Gulf Coast roads got a shot at it.

Started with a full decon wash (iron removal, clay bar, degrease) and a fine polish so everything went down on perfect paint. Then we ran Yacht Armor on the hood, the same marine grade film we put on boats. Mike & Jerry's PPF on the entire front end and mirrors. And System X Max G ceramic on the rest of the car for gloss and easy washes.
Proud to be sponsored by Crown Leisure Marine. Appreciate you Chris 🤝

The build:
Yacht Armor PPF | Hood
Mike & Jerry's PPF | Front end + mirrors
System X Max G | Rest of the vehicle
📍 Biloxi, MS
📞 (228) 234-9147

10/19/2026

10/18/2026

Your first thought when it comes to heavy machinery probably isn't 'I need to protect my half million dollar machine from the elements.' But there's a special group of y'all out there that take care of your equipment different, and this one's for you.

This is the full process, start to finish, of InduroPro going on. It's not paint, it's the first industrial grade clear ceramicized epoxy that doesn't yellow, blocks 85% of UV, stops rust and corrosion, and restores paint that's already faded, all backed by a real warranty. If you're the kind of owner who cares what your equipment looks like in five years, not just today, this is what that looks like.

08/30/2026

This customer was tired of paying thousands every few years just to watch his equipment fade and wear right back down within a couple seasons.

We coated this one in InduroPro instead. Same protection that’s been holding up on boats for years, now doing the same thing for heavy equipment like this gooseneck. No more repaint cycle, no more thousands lost to fading and corrosion, just a coating built to actually last.

If you’re stuck repainting equipment every few years, message us. We’ll show you a better way before you spend that money again.

08/27/2026

Big news from Gulfside Armor.

We started out protecting boats down here, bringing faded hulls back to life and stopping rust before it eats a boat alive. That part isn’t going anywhere, we’ll always do that.

But we found something bigger. The same coating that’s been saving boats down here works just as hard on heavy equipment, and it flat out works. Construction equipment, fleets, marine gear, ag equipment, anything getting cooked by this sun and chewed up by salt air, we can bring it back to life and protect it for years.

This is where we’re putting everything going forward and we could not be more proud of it. If your equipment is looking rough, message us. We’ll come show you in person what this stuff can do before you spend a dime. InduroPro

08/27/2026

Coming soon..

08/27/2026

Little change of scenery today. Took an F350 and wrapped the whole thing in Yacht Armor as our PPF of choice, and she came out amazing.

Big thanks to our guy Tray Cherry for trusting us with it. This stuff isn’t your average protection film. Yacht Armor Clear Shield is built to stand up to the Gulf Coast, rock chips, road grime, salt, sun, all of it, while keeping that paint looking exactly like the day it rolled off the lot.

If you’ve got a truck, boat, or anything you want protected the right way, come see us. We’ll take care of you

08/20/2026

This Contender 39ST came all the way from Venice, Louisiana — 3 hours and 15 minutes of trailering, right past every detail shop in between, to have Gulfside Armor handle it.

Here’s what we did:
🔹 Full exterior wash + salt/iron decontamination
🔹 Gelcoat cleaned and prepped
🔹 System X G-MAX+ ceramic coating — our max tier
🔹 Yacht Armor PPF on the interior — 7-year coverage, 3-year full replacement
🔹 5-year ceramic warranty, CARFAX registered

We ran through just about every coating on the market before we landed on System X. It’s the only one that held up the way we demand, and we’re certified to apply it. That’s why it’s the only coating we back with a 5-year guarantee — and that warranty is backed by System X themselves. Paired with Yacht Armor film on the interior, this boat’s protected inside and out.

When a customer drives 3+ hours to trust you with a boat like this, we don’t take it lightly.

Auto & marine detailing • Paint & gelcoat correction • System X Ceramic • Yacht Armor PPF • 3M Certified vinyl • Non-skid & hullside restoration • Rust removal • Bottom treatment

Your car. Your boat. Our obsession. 💧
📲 Book now — DM us or call/text (228) 234-9147

05/27/2026

A brand new Freeman Boatworks 28 is a serious investment. Blake Arata didnt cut corners protecting his.

We took her top to bottom. Nothing left exposed.

The hull and transom wrapped in Yacht Armor Clear Shield MPF so every scuff, dock rash, and bit of UV hits the film instead of the boat. That finish stays factory fresh for years.

Then every smooth surface got System X Ceramic Protection Ceramic Protection G Max. Garmins, motors, tunnel, rub rails, console, second station. All of it sealed so water beads off and grime wipes away clean.

And the parts that take the real abuse got Gtechniq. Nonskid, livewells, fish boxes, all the vinyl and plastics. Even the rough stuff stays easy.

Half measures don’t protect a boat like this. You go all in or you don’t bother. Blake went all in.

Freeman 28 | Full hull + transom Yacht Armor MPF

System X G Max on every smooth surface

Gtechniq on nonskid, livewells, fishboxes, vinyl and plastics

Orange Beach to Venice we got you

📲 Inquiries: (228) 234-9147

🌐 gulfsidearmorco.com