The Blower Shop

10/22/2026

71 series intercoolers back in stock. Give us a call if you’re looking for one or maybe something that sits on top of it ? ?

10/14/2026

192/250 front bearing plate improvement. We installed the oring groove on the front plate for a better sealing surface between the bearing plate and the front cover. The second picture is a side by side between the old design and our new design. blower shop # superchargers

10/03/2024

Hey there race family,
Please help us spread the word and/or donate for Hailey. Hailey is 19 years old and the daughter and sister of two of our employees. She is suffering from debilitating pain from CRPS. All money raised will be going towards specialty treatment at the Spero Clinic. Any amount, large or small, will help make a difference. Please check out the link for more information.

In October of 2022, Hailey’s life changed dramatically when a torn meniscus in her left knee… Wendy Berg needs your support for Help Hailey Overcome CRPS Pain

08/23/2024

To increase performance through even distribution of air and fuel to each cylinder, The Blower Shop has developed its own intake manifolds for the LS Chevy applications. Our Manifold is a Billet 2 Piece design with an interchangeable Top Plate for either the 71 series or 250 Low Profile applications.  All our LS Bases (Cathedral or Rectangular) come machined with EFI ports for direct port injection.  Our Standard (carb) NON EFI manifold includes #2577 EFI Block Off plates.  This allows for easy conversion in the future if you ever decide to add Direct Port Injection.

 
Kits Include:
LS1 Billet Base Manifold Cathedral Ports

#2578 – LS Billet Top Plate (71 Series)

#2577 – EFI Block Off Plates

#2589 – Pop-Off Plate with Springs

#2590 – Aluminum Stud and Nut Kit

#4900 – Base Gasket

#4946 – LS Intake Ports O-ring Kit (8 pk)

(10 ea.) – M6-1.00 x 65mm S.H.C.S.

08/01/2024

ATTENTION**
Our sales team will be out the shop attending the 53rd Annual Nightfire Nationals at Firebird Raceway in Eagle, ID  Friday August 2nd. We will be accepting orders on our website.  For phone inquiries/orders please leave a message or e-mail us at [email protected] and we will reach out as soon as possible next week. Thank you!   

07/29/2024

DID YOU KNOW?
We service all 6-71 through 14-71 Roots-style superchargers, including repair, repolish, re-strip and re-seal.

We also specialize in rebuilding and Repairing All B&M , SSI , Mercruiser, and Weiand pro-street and pro-marine superchargers.

For all your repair needs and questions give us a call at
(208)-985-7650

07/23/2024

TBS 71s Marine Intercooler
If you’re interested in a cost effective method of increasing your supercharger’s output as well as improving reliability, look no further.
TBS Marine intercooler allows for higher efficiency and more power without the risk of detonation.
TBS Marine Intercoolers are designed and built exclusively from billet aluminum, known for its strength over casting, With core a fin count of 11 per inch on the air side and 11 on the water side. After TBS coats the core with exclusive “Chemfilm” protective coating for added beauty and longevity, we pressure test it to 100 pounds per square inch. Includes a billet end tank with 2 integral 3/4″ NPT fittings for added strength and increased water flow.
Testing this Intercooler on a 500 Cubic inch big block, intake air temps dropped 44% from 190* to 106* leading to significant horsepower and torque gains.
IN STOCK AND READY TO SHIP CALL (208) 985-7650
Or ORDER ONLINE .

06/18/2024

FOR SALE

1 OF 1  TBS SCREAMIN' EAGLE 6-71 SUPERCHARGER AND DRIVE KIT

$7,500.00 USD

 

PRICE INCLUDES:

-CNC Machined 6061 Billet Aluminum 6-71 Blower

-120° High-Helix Billet Rotors. 6pt Teflon. For Gas, E-85, or Alcohol use.

-Intake Manifold for Conventional Big Block Chevrolet Engine

-Dual 4150 Style Carburetor Adapter Plate

-Complete Idler Assembly

-8mm Blower Drive Belt

-Top and Bottom Blower Pulley (Size TBD)

-2V Accessory Pulley.

-Assembly Hardware and Gaskets

-Big Block Chevrolet Valve Covers

-Dual Carb. Blower Scoop, Air Filters and Hardware

 

 

Own the blower that you all know and love!  This blower has been seen at PRI, local shows, and showcased on our TBS Screamin' Eagle T-Shirts around the world.

Fully manufactured, assembled and custom Cerakote done in USA.

This is a one-of-a-kind, custom version of our TBS part number #2019. Comes with a complete, ready to bolt on drive kit. Pulley size and drive ratio will be determined based on buyer's desired boost level and engine configuration.

Blower, Intake Manifold, Dual Carb Scoop, Carb Adapter Plate and Valve Covers feature an American Flag style Cerakote finish. The procedure was locally designed and applied by Fall River Arms in Meridian, ID.

UPS domestic and international shipping options available at buyer's expense. Fast Fuel System is NOT included. Manifold to cylinder head bolts NOT included. Ready to ship.

Please call 208-985-7650 if you have any questions.

$7,500 USD

 

 .

06/13/2024

SPECIAL!!!!!

$3,300.00

8-71 CAST CASE PART # 2021

LIMITED QUANTITIES – AVAILABLE WHILE SUPPLIES LAST

As an ode to the “Old School” days, we are bringing back a little piece of Hot Rod history and performance.  We are offering a limited production of our TBS cast case 8-71 Supercharger.  These blowers will utilize the original GMC 60deg cast Detroit Diesel rotors.  This is an excellent choice for a traditional look on your hot rod, muscle car or boat. (Intended for use in mild boost applications (8-10 PSI) on engines at or below 7000 RPM.)

Includes:

New TBS cast aluminum 8-71 blower case, Polished exterior, Hard Anodized interior

New Polished billet bearing plates.

New Polished billet front cover w/ pressure relief valve, sight glass and drain plug.

60 deg cast Detroit Diesel 3 lobe rotors

https://theblowershop.com/shop/superchargers/blowers/standard/cast-case-8-71-2021/

06/10/2024

BIG NEWS !!!!NEW BLOWER BUILDS ARE NOW APPROXIMATELY 2 WEEKS OUT!!!!!

ORDER YOURS TODAY!!!!!

208-985-7650 OR ONLINE @ THEBLOWERSHOP.COM

Manufactured and assembled in the USA