Street kings automotive services & sales.

07/10/2026

Look im in motion but slow motion i guess some motion is better then none. Thermostat replacement bolt broke and had to remove it to finish up. 🤦🏾‍♂️

07/05/2026

Grand rising to my clients that EXSPECT me today im sorry fk my ankle up and now im in heal mode ty for understanding contact you soon.

07/04/2026

Enjoy your day everyone im at it early 8 pm before this heat hits. Then im with yall 😆

07/01/2026

You welcome

🛑 10 Causes of Brake Pedal Vibration

A vibrating brake pedal is a warning sign that something in the braking system is not operating correctly. While a slight pulsation may seem harmless at first, continued vibration can reduce braking performance, increase stopping distance, and affect vehicle safety. The vibration is usually caused by uneven braking surfaces or worn suspension and steering components.

The most common cause is warped brake rotors, often resulting from excessive heat or improper installation. Brake Disc Thickness Variation (DTV) can also create pedal pulsation even if the rotors are not visibly warped. Uneven or glazed brake pads reduce braking efficiency and cause inconsistent contact with the rotor.

Loose or worn wheel bearings may allow excessive wheel movement during braking. Out-of-balance wheels can amplify vibrations, especially at higher speeds. A sticking brake caliper prevents even brake pad pressure, causing the rotor to overheat.

Other possible causes include collapsed brake hoses, which restrict brake fluid flow, improper wheel installation or incorrect lug nut torque, worn suspension or steering components, and rust, dirt, or debris trapped between the brake rotor and wheel hub.

Ignoring brake pedal vibration can lead to premature brake wear, reduced vehicle control, and expensive repairs. Regular inspection of the brake system, wheel bearings, suspension, and wheel installation helps ensure smooth braking and maximum driving safety.

Common Symptoms:
✔ Brake pedal pulsation
✔ Steering wheel vibration while braking
✔ Vehicle shakes during braking
✔ Increased stopping distance
✔ Uneven brake pad wear
✔ Brake noise or grinding

Dr.mechanics 🔧🛑🚗

Mechanic Tip: Always measure rotor runout and disc thickness before replacing brake components. Proper diagnosis prevents unnecessary parts replacement and ensures a safe, reliable braking system.

06/30/2026

Hot ass hell

06/27/2026

Early morning outer rod replacement.

06/17/2026

Fact

💯💯💯

06/17/2026

Mannn helleva long week.

06/05/2026

Another 1 fuel pressure sensor replacement along with throttle body cleaning.