TMeyer Inc- Precision Automotive Machining

06/04/2026

Another Steve Kenzel 444 stroker with 4V iron cc heads.
Flow numbers below
1/2 filled block.
676.4 HP @ 6,500
601.4 TQ @ 4,700

Be like Steve...get your Track Boss 444 stroker kit here 👉 https://www.tmeyerinc.com/product/rotating-assembly-351m-400-stroker/ 👈

06/03/2026

On Monday, I shared our plans to move north and start the next chapter for TMeyer Inc. 🏡⬆️🌲

Since then, I’ve had quite a few questions about what machining work we’ll be taking on.

The short answer: Ford engine block work only. 🔵🔧

That means SBF, BBF, Cleveland, and FE blocks.

One of the goals after the move is to get deeper into manufacturing and high-end block machining — including main caps, bed plates, lifter blueprinting, 4-bolt main cap conversions, bed plate installs, and other precision Ford block work. ⚙️📐🔥

We’re not trying to be everything to everybody. The plan is simple: stay focused, do the work we know, and keep pushing Ford engine development forward. 💪🇺🇸

We’ll keep you updated as the new shop comes together. Lots more to come. 🚛🏁

New location. Same Ford obsession. Bigger plans. 🔧🔵

06/01/2026

05/27/2026

A lot of people assume an oil filter is just an oil filter. It’s not that simple. 🛢️

This little $35 adapter gives Ford engine builders another option by allowing the use of the WIX 51268 filter.

Why do we like that? Because it offers a really interesting middle ground:
✅ Better flow than the common 51515
✅ Better filtration than the 51515R racing filter

That’s the big-picture idea — less restriction without jumping all the way to a coarse racing filter.

No magic. No snake oil. Just a simple part with a practical purpose. 🔧

Fits Windsor, Cleveland/335, BBF/385 families, and some 6-cylinders. Not FE.

Order yours here today. 👉 https://www.tmeyerinc.com/product/oil-filter-adapter/ 👈

05/15/2026

Flash Back Friday 🔥

Back in 2015, our TMeyer 351M/400 stroker proved just how much potential the M-block platform really has. Same 590 lb-ft of torque as the later Hot Rod 501-inch 460 build, but with fewer cubic inches and more horsepower. 💪⚙️
👉 https://www.tmeyerinc.com/ 👈

05/12/2026

🚨 ZF-5 Adapter Kits are back on hand! 🚨

Fresh batch just arrived from the machine shop for our Track Boss Products **ZF-5 Transmission Adapter Kit** for the **351M / 400 Ford**.

This kit is designed around using the **Ford F-Series 460 gas ZF5 transmission** behind a 351M/400, helping simplify one of the trickier parts of the swap — flywheel, starter, clutch, and pilot-bearing fitment.

✅ Fits 351M / 400
✅ Pilot bearing installed in adapter
✅ ARP flywheel bolts & washers included
✅ Designed for the F-Series 460 gas ZF5 transmission
✅ Helps take the guesswork out of the swap

Customer feedback has been great:

💬 “Loved it.”
💬 “Saved me a lot of headaches.”
💬 “Did away with a lot of headaches.”

Note: Some installations may require minor header or fitment adjustments depending on the vehicle and parts combination.

Available now at👉 https://www.tmeyerinc.com/?s=ZF5&post_type=product&wps-title=1&wps-excerpt=1&wps-content=1&wps-categories=1&wps-attributes=1&wps-tags=1&wps-sku=1&orderby=title-ASC&ixwps=1 👈

05/08/2026

🔧 Looking for quality sealing solutions for your Ford Cleveland engine? We’ve got you covered! 💪

At TMeyer Inc., we handle a great selection of **SCE gasket products** for **Cleveland, 351C, and 351M/400** applications — including **rear main seals, oil pan gaskets, timing cover sets, intake gaskets, and exhaust gaskets**. 🏁

One thing that really sets SCE apart: **SCE offer 10 different intake gasket options just for the Cleveland head** — helping you get the right fit for your specific cylinder head, intake, and build combination. ✅

When performance and reliability matter, start with the right gaskets. 🔥

🛒 Shop now at www.TMeyerInc.com

05/05/2026

🇦🇺 **Featured Manufacturer: Nornda Automotive** 🇦🇺

We’re proud to offer premium performance components from **Nornda Automotive** — the Australian manufacturer behind some of the best-known names in engine performance:

🔴 **JP Performance** — gear drives, timing sets & oil pumps
🔴 **Rollmaster** — premium timing chain sets
🔴 **Romac** — performance harmonic balancers

🔧 Building a **Ford Cleveland stroker**?
Do you have more timing chain slack than you’d like? We offer timing sets that are **.005" and .010" shorter** to help tighten things up and get your build right.

✅ Precision engineered
✅ Premium quality
✅ Built for performance
✅ Race-proven reliability

See more at: www.tmeyerinc.com

04/28/2026

🔥 **No Wait Ford Cleveland Rotating Assemblies!** 🔥

We currently have **Ford Cleveland rotating assembly kits available and ready to ship**.

✅ Molnar crankshaft
✅ Molnar connecting rods
✅ Icon pistons & ring set
✅ Starting at **$2,800**

Ask us about adding custom pistons, rod & main bearings, balancing, balancer, flexplate, and the correct timing set.

📧 Contact us at: [email protected]

04/23/2026

🚨 **Trick Flow cylinder heads are in available and ready to ship!**

We’ve got bare and assembled options available, sorted by price, with **FREE shipping to the lower 48 states** and **NO tax except MN**. 🏁🔧
👉 https://www.tmeyerinc.com/product-category/brand/trick-flow/ 👈