MBS Manufacturing. Inc.

06/11/2026

Made in USA!
https://mbsmfg.com/DSS8O-E7/
SKU:DSS8O-E7
A set of two (2) new, CNC Machined, delrin swingarm spools/sliders with 8mm stainless steel bolts.

Size: M8 x 1.25mm Threads
Color: Orange
Compatible with Honda: RVT-1000R, RC-51, CBR 954, CBR 1000RR, CBR 600RR, every Hayabusa, and every GSXR 600, 750, and 1000.

Compatible with Suzuki Hayabusa 1999-2008, the new 2008 B-King, 2007 and 2008 Bandit 1250S, 2003-2008 SV650, SV650S, and the new 2008 GSX650F. Sliders are offset to eliminate stand damage to your swingarm.

Functions: the swing arm spool screw which is used with the swing arm can easily make the motorbike up or down, to avoid damaging the body of your motorcycle while you stop it or repair it. It is made professionally in the USA on state of the art CNC equipment with 100 % quality inspection.

06/10/2026

Made in USA!
https://mbsmfg.com/ls-lt-stall-converter-hub-adapter-transmission-crank-ls1-lt1-th400-th350-flywheel-lm7-lr4-lq4-ls6-l59-lq9-lm4-l33-ls2-lh6-l92-l76-551165/
SKU:D17
LS/LT Crankshaft Hub adapter for Torque Converter.
Adapts Powerglide, 4L80E, TH400, TH350, 700R4, 4L60, 4L60E (from non LS engine) torque converter snout to LS/LT engine
The spacer will center the nose of the converter to the curved flex plate.

The spacer will center the nose of the converter to the curved flexplate.
Features:
- 100% made in USA
- LS1 Flexplate Adapter Spacer for GM TH350 TH400 Conversion Swap LS2 LS3 LS6 5.3 6.0 LS7.
- The spacer will center the nose of the converter to the curved flexplate.
- For use on 1998-04 LS1 based engines using a TH350 or TH400 transmission.
- Compatible With All Ls And Lt Series Engines Gen 3, 4, 5 (Except 99-00' 6.0L Does Not Require This).
#

06/09/2026

Made in USA!
https://mbsmfg.com/SSBIDNA-E16/
SKU:SSBIDNA-E16
Sprocket Shaft Bearing Installation Tool.
Compatible with latest Harley Davidson Twin Cam sprocket shafts.
Function: this tool will install the bearing on the sprocket shaft and the flywheel assembly on the left side of the engine case.
Material: made of heavy-duty steel with black oxide coating, prevents corrosion and rust, solid and durable. Tool comes with black oxide finish preventing corrosion to assure many years of service. This Sprocket shaft bearing installation tool/ adapter is professionally made in the United States on the state of the art CNC equipment with 100% quality inspection.

06/09/2026

Made in USA!
https://mbsmfg.com/ICBLDNA-B15-ICBPDNA-B16-B168-C12A/
SKU:ICBLDNA-B15+ICBPDNA-B16+B168-C12A
Inner Cam Bearing Puller and Installation Tools & Two new JTEKT (former Koyo/Torrington) B-168 Bearings.
Compatible with Harley Davidson Twin Cam and Dyna models. Designed for all TC96, 103, 107, 110 that use the B168 (AKA I.D. 1.00") bearings. Will ALSO fit for 2006 Dyna models. They use the larger 1.00" bearings (B168), and require the same tool as the newer (2007+) bikes.
Function: This set is specifically designed for removing and installing the inner cam bearings on the newer model Twin Cams and Dyna Harleys.

06/08/2026

Made in USA!
https://mbsmfg.com/D8-D11-D12-D13-D14/
SKU:D8+D11+D12+D13+D14
Full Set (5 piece) of Primary Drive Locking Bar Tools 7.6 inch /8.5 inch /7.125 inch/ 5.95 inch/ 5.625 Inch compatible with Harley Davidson.

7.6” Primary Drive Locking Bar Tool compatible with Harley Davidson 5 Speed Big Twins labeled FXR & FLT.

7.125” Primary Drive Locking Bar Tool compatible with Harley Davidson 2006 to Present Dyna and 2007 To Present Softails.

8.50" Primary Drive Locking Bar Tool compatible with Harley Davidson 4 Speed Big Twins, Dyna Glide, and 5 Speed FXST Models.

5.950" Primary Drive Locking Bar Tool compatible with Harley Davidson Late 6 Speed Models.

5.625" Long Primary Locking Bar Tool compatible with Harley Davidson 07-Present 6 Speed FLHR, FLHX, FLHT, FLTR models.

06/08/2026

06/08/2026

Made in USA!
https://mbsmfg.com/PM271RH-E6/
SKU:PM271RH-E6

Flywheel Puller 27mm x 1.0mm.
The following is for reference only. Please check the thread size of your motor before ordering. This is used for less common applications, make sure you don't need a LEFT hand 27mm puller instead!
Compatible with Gas Trial Bikes, MZB, Electronic Ignition. May Work on Others, please verify thread diameter, pitch, and direction.

Thread Size: 27mm x 1.0mm
Thread Direction: Right Hand
Material: made of high-quality cold rolled steel, which is sturdy and durable. Puller comes with black oxide finish preventing corrosion to assure many years of service. This puller is professionally made in the USA on the state of the art CNC equipment with 100% quality inspection.

06/08/2026

Made in USA!
https://mbsmfg.com/HPEVO-D25/
SKU:HPEVO-D25
Inner Cam Bearing Installer and Puller Tool Set.
Compatible with Harley Davidson 1986 to Present Single Cam EVO.
Function: This set is specifically designed for removing and installing the inner cam bearings on the Harley Davidson 1986 to Present Single Cam EVO. This tool lines up with the bearing bore for a perfect fit each time.

06/07/2026