Custom Marine Inc.

Custom Marine Inc. Our services include vintage boat restoration, yacht interior renovations, fiberglass & gel coat repairs, paint jobs.

Since 1994 we have built a solid reputation for providing our customers with extremely high quality work, far beyond the capabilities of most typical marinas and repair yards. Since 1995 we have been restoring classic wooden boats at a show quality level. Restoring a wooden boat is an art and requires tremendous patience and a high level of craftsmanship. We really do treat your boat as if it were

our own and we have a lot of pride in our finished product. The key is that we not only work on boats as a profession but we are also enthusiastic boaters through and through. Along with restorations, we offer services such as renovating or building yacht interiors, building custom boats, repairing fiberglass, Brightwork and painting.

Tearing into more of the 28' Sportsman. Finding loads of hidden deterioration , failing past repair attempts. None of ...
06/06/2026

Tearing into more of the 28' Sportsman. Finding loads of hidden deterioration , failing past repair attempts.
None of it is a concern as we are building an entirely new hull!

Boat shop bling! It's always awsome to see the results of the numerous steps and time that we go through to obtain show...
05/29/2026

Boat shop bling!

It's always awsome to see the results of the numerous steps and time that we go through to obtain show quality varnish work.

A new transom for the 30' Islander Sedan taking shape being built on our new game changer mobile transom easel cart.
05/21/2026

A new transom for the 30' Islander Sedan taking shape being built on our new game changer mobile transom easel cart.

With the assistance of a slick new jig we constructed , the process of removing the old transom from the 30' Islander Se...
05/07/2026

With the assistance of a slick new jig we constructed , the process of removing the old transom from the 30' Islander Sedan became a very simple manuver that massively reduced the heavy lifting. Once removed , the fairness of all her new beautiful white oak frames can really be seen and appreciated
"Work smarter not harder"

Ultra high quality jointery is a very important part of our mission.Its these often unseen things that we do on every si...
04/24/2026

Ultra high quality jointery is a very important part of our mission.

Its these often unseen things that we do on every single boat that make the difference between good work and great work!

Click on each photo to read captions.

The topside of this 31' Tiara swim platform also needed repair work.We addressed :-Fractures on both aft corners from pa...
04/17/2026

The topside of this 31' Tiara swim platform also needed repair work.

We addressed :

-Fractures on both aft corners from past dock damage,

-2 Fractured transom mount pads

-Some miscellaneous gel coat repairs

After the fiberglass repairs, we applied fresh gelcoat.

It turned out very nice .

Along with the new composit core this platform is ready for years of more use

See captions on the photos for more details.
Tiara Yachts Coosa Composites, LLC

This swim platform from a 31' Tiara had a rotten balsa core .The nasty old coreing was all removed. A new composit core ...
04/05/2026

This swim platform from a 31' Tiara had a rotten balsa core .

The nasty old coreing was all removed.

A new composit core was then fused to the original top skin. Then layers of fresh fiberglass were laid over it to form a new bottom skin and was just finished off with glossy white gel coat.

Next , before we can call it done this platform will also get some glasswork to repair some dock damage.

Finish work has been going on practically non stop cranking out interior parts for the 19' Lyman Runabout . ...
02/28/2026

Finish work has been going on practically non stop cranking out interior parts for the 19' Lyman Runabout .

The 28' Sportsman build getting fit with more structural sapele planking . Because the existing bottom planking was so s...
02/06/2026

The 28' Sportsman build getting fit with more structural sapele planking .

Because the existing bottom planking was so severely unfair and asymmetrical port to stbd. , on this hull, we've had to work from scratch to create flowing uniform plank lines without using any old planks as patterns to within a tolerance of a 1/16" side to side.

We picked up a new to us Powermatic band saw in the fall. Before it went into service in our shop we took it apart , cl...
01/22/2026

We picked up a new to us Powermatic band saw in the fall.

Before it went into service in our shop we took it apart , cleaned it up, striped it to bare metal, gave it a fresh new paint job, new pin stripes , new tires, and all new bushings & bearings
Part of producing high quality work also involves maintaining and updating our equipment so it performs as it should .

Address

902 Taylor Avenue
Huron, OH
44839

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

(419) 621-1188

Website

Alerts

Be the first to know and let us send you an email when Custom Marine Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Custom Marine Inc.:

Shortcuts

Share

Category