TLA Motorsports

TLA Motorsports Specializing in Vehicle Performance Modifications and Dyno Tuning

05/05/2026

Ok everybody. What's your thoughts on an RSVP Miata or Mazda ONLY Dyno Day? We would have prizes and food. Comment your thoughts below.

You know, I'm a firm believer in. If you can't do something. Don't do it. I don't understand how this is considered acce...
02/06/2026

You know, I'm a firm believer in. If you can't do something. Don't do it. I don't understand how this is considered acceptable workmanship. This Ferrari came to us in need of some serious love. I'm beside myself on the continuous amount of things i keep finding. Half of the intake manifold bolts where loose, just about every ITB blade was at a different amount of open. And butt connectors for days. oh and my personal favorite is the 6 port vacuum block ported into the intake runners (only 6 of the runners) and the 4 Bar map sensor tied into it. Oh and don't forget the cam sensor has been deleted from the harness 😅🤦stay tuned we're going to make this car sing again. 😎

We finally got the front door uncovered 😅 I'm pooped now. Good job team on getting the snow removed so we can at least g...
01/27/2026

We finally got the front door uncovered 😅 I'm pooped now. Good job team on getting the snow removed so we can at least get inside!

A little late night engine swapping to get caught up. I'm working diligently to get everybody's cars in and done. If you...
01/14/2026

A little late night engine swapping to get caught up. I'm working diligently to get everybody's cars in and done. If you have a car here for work I promise I haven't forgotten about you and I'll get to it as soon as humanly possible. I just hired a full time guy and we're doing our best to get these cars out. Thank you everyone for your continued support.

I want to say I'm surprised 🤦 but FFS engines don't run very well on silicone, loose oil pump bolts, a half inch of cam ...
01/06/2026

I want to say I'm surprised 🤦 but FFS engines don't run very well on silicone, loose oil pump bolts, a half inch of cam in and out travel, and whiz wheeled heads and block. I'll post the video as soon as I'm done editing it.

Ok, here's the deal on that engine. 2018 1LE SS Camaro. Came in with a full stage 3 BTR supercharger cam kit installed a...
12/31/2025

Ok, here's the deal on that engine. 2018 1LE SS Camaro. Came in with a full stage 3 BTR supercharger cam kit installed and a Procharger P-1SC kit. Also installed was a set of LT4 injectors and HPFP.

The bad. After multiple days of messing with the car finding all kinds of issues for example the intake manifold wasn't seated right. MAF failure, MAF/BARO breakout installed wrong. Crank case ventilation not hooked up correctly. All the spark plugs with different gaps. I finally got it to idle (pulling 60% virtual VE) car shut off hard and that's what sent me on this journey. I'll have a video of what I found in the next few days.

12/30/2025

I’m sure this is fine 🤦🏻

Nothing like a 2 dollar crank bolt 🤦
12/30/2025

Nothing like a 2 dollar crank bolt 🤦

12/30/2025

Finally done with moving the big equipment.

We've come a long way getting all of the machinery moved around. While we're streamlining everything for the new year. C...
12/19/2025

We've come a long way getting all of the machinery moved around. While we're streamlining everything for the new year. Check out www.tlamotorsports.com you can submit your cars needs or wants directly on the site and I will personally respond to it. Thank you for your continued support!

Address

10596 E59th
Indianapolis, IN
46236

Opening Hours

Monday 10am - 6pm
Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 12pm - 6pm

Telephone

+13178551990

Website

Alerts

Be the first to know and let us send you an email when TLA Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category