Southside Machine Performance The Original Automotive Suspension Systems

Southside Machine Performance The Original Automotive Suspension Systems Custom built high performance automotive steering and suspension systems. We are custom builders of performance steering and suspension systems.

Specializing in GM A, B, F and G Body platforms from 1964-1996. Rear fixed and adjustable high performance control arm kits for your daily driver up to your 1500 horsepower race car. Fabrication

Welding

General Machining

Machine Repair

Coatings

Sandblasting

Painting

Design Engineering

Stress Relieving

Automotive Lifts ( Donk)

General Automotive Repair

Automotive Customization

10/20/2025
Don't let the forecast divert your attention from going to the G Body Classic on the 12th. It's not going to rain all da...
07/05/2025

Don't let the forecast divert your attention from going to the G Body Classic on the 12th. It's not going to rain all day everywhere. Looking forward to seeing everyone again this year.

Anyone looking for traction? Have you ever heard the term instant center or antiquat?Don't forget to preorder your custo...
07/02/2025

Anyone looking for traction? Have you ever heard the term instant center or antiquat?

Don't forget to preorder your custom parts before the G Body Classic on July 12th.

7 HOLE-G SOUTHSIDE MACHINE PERFORMANCE UPPER RELOCATION BRACKETS G-BODY.


TRACTION IS ABOUT GETTING YOUR REAR ARMS AT THE PROPER ANGLE

The term is instant center and the web is full of places to calculate your needs.

The G Body Platform cars react REALLY well to the upper arm being close to level and the lower arms about 4"-5" below the housing.

If you call, we can plot and calculate your current setup and what needs to be done to correct it.

This will allow you to get the upper arms at the proper angle for traction. This will also require a shorter upper arm. You can build a new shorter arm or we can build them for you.

This kit will include brackets for each side, hardware and the spacer needed. Welding required by the installer.

Thanks, Brandie, with Southside Machine Performance Indianapolis Indiana.
Tech line 317-408-4272

Don't forget to preorder your rear trailing arms before the show on July 12th. Prices are too low to list.Www.southsidem...
06/30/2025

Don't forget to preorder your rear trailing arms before the show on July 12th. Prices are too low to list.

Www.southsidemachineperformance.com

SSM G BODY ULTIMATE REAR KIT

DOUBLE ADJUSTABLE (on car) POLY LOWER CONTROL ARMS
4 HOLE RELOCATION BRACKETS FOR INSTANT CENTER CHANGES (TRACTION)
DOUBLE ADJUSTABLE (on car) POLY UPPER CONTROL ARMS
POLY HOUSING BUSHINGS
HARDWARE KIT

This kit is designed to handle everything from the daily driver, drag car, autocross and big wheel build. Full control and on car adjustability.

Our extreme duty control arms allow for easy pinion angle adjustment for reduced vibration and increased traction. Our exclusive Polyurethane bushings offer controlled positioning during suspension travel which improves traction and rear suspension efficiency. This item is a must for any high horsepower

Benefits: Easy in-car pinion angle adjustments on most models for improved traction and reduced wheel hop. Heavy duty construction for long lasting durability on the street or track. Complete ready to bolt-in and most kits includes polyurethane rear end housing bushings.

Stock control arms are on the borderline of junk, bushing deflection and rusting weak stamped material add for traction loss and poor handling ability. Our tubular control arms are designed to give you the best of both worlds, whether your car is a weekend cruiser or a weekend track addict we got you covered.

These are truly overkill! All grade 8 hardware is included. Made in USA!

All parts are custom built in house. Indianapolis Indiana

Please give us a call before your purchase to make sure this is the right kit for you. We have several kits available for different types of cars.

Features and Benefits:

Improves Traction

Reduces Wheel Hop

Improves Handling And Stability

Stronger Than Stock Arms

Features TIG-welded Construction

Easy pinion angle adjustment

Sway Bar Ready

1978 - 1988 Chevrolet Monte Carlo, Malibu, El Camino
1978 - 1988 Buick Regal, Grand National
1978 - 1988 Pontiac Grand Prix
1978 - 1988 Oldsmobile Cutlass

Thanks, Brandie, with Southside Machine Performance Indianapolis Indiana.
Tech line 317-408-4272

You know, you've been wanting to get this kit, and now's the time. Don't forget to preorder your 8.8 Swap Kit before the...
06/19/2025

You know, you've been wanting to get this kit, and now's the time. Don't forget to preorder your 8.8 Swap Kit before the G Body Classic on July 12th.

The weld on bracket kit deals with the instant center issue and upper control mounts.
This control arm kit from SSM Performance is custom built and designed to bolt an Ford Explorer rear end into GM G-Body, this includes Chevelle, GTO, Monte Carlo, Malibu, El Camino, Regal, Grand National, Grand Prix and Cutlass and many others. These upper control arms are built at the correct angle and length to attach to the the truss and chassis. The relocation bracket kit will allow for proper instant center (geometry) changes. The adjustable lower control arms allow you to center rear.

Www.southsidemachineperformance.com

Thanks, Brandie, with Southside Machine Performance Indianapolis Indiana.
Tech line 317-408-4272

Don't forget to preorder your instant center kits and chassis bracing before the G Body Classic on July 12th.Www.southsi...
06/18/2025

Don't forget to preorder your instant center kits and chassis bracing before the G Body Classic on July 12th.

Www.southsidemachineperformance.com

Thanks, Brandie, with Southside Machine Performance Indianapolis Indiana.
Tech line 317-408-4272

Don't forget to pre order your frame notch kit before the G Body Classic on July 12th.Prices are too low to list. SOUTHS...
06/17/2025

Don't forget to pre order your frame notch kit before the G Body Classic on July 12th.

Prices are too low to list.

SOUTHSIDE MACHINE PERFORMANCE FRAME NOTCH KIT FOR THE G BODY.

Save time and headache when trying to build your own notch with our kit.

CNC cut to fit all G Body frames. Made from Premium Grade 1/8" (.120") Pickled and oiled steel (HRPO).

Optional 3/16" and 1/4" main plates

This comes with both right and left frame sections and ends to bridge the gap from the notch.

This is thicker and stronger than the factory frame.

This kit requires metal fab experience and can be done in the garage with a decent welder.

Will need a welder, hammer, die grinder and a bench vice.

Thanks, Brandie, with Southside Machine Performance Indianapolis Indiana.
Tech line 317-408-4272

https://southsidemachineperformance.com/shop-1/ols/products/ssm-g-body-frame-notch-kit

Okay, guys, it's that time of year again. The G Body Classic is right around the corner, July 12th in Medina Ohio. We wi...
06/11/2025

Okay, guys, it's that time of year again. The G Body Classic is right around the corner, July 12th in Medina Ohio. We will be setting up our booth with working displays of our game changing products. We are taking pre orders with prices too low to list. We will not be taking the entire shop with us, just the parts that we need to.
Please reach out directly if you have any questions or need to preorder some parts. We have Baby Boomer syndrome and rarely check social media.
Frame notches, frame bracing, torque box bracing, instant center kits, 8.8 swap kits, 12 bolt swap kits. Non adjustable, single adjustable and double adjustable upper and lower trailing arms. Geometry correction front end kits, and much more.

Thanks, Brandie, with Southside Machine Performance Indianapolis Indiana.

Tech line 317-408-4272

Happy Holiday's
12/24/2024

Happy Holiday's

Setting up shop for tomorrow's 7th Annual G Body Classic. See everyone there.
07/12/2024

Setting up shop for tomorrow's 7th Annual G Body Classic.
See everyone there.

Address

1701 EAST EDGEWOOD Avenue UNIT 17241
Indianapolis, IN
46217

Opening Hours

Monday 8am - 11pm
Tuesday 8am - 11pm
Wednesday 8am - 11pm
Thursday 8am - 11pm
Friday 8am - 11pm
Saturday 11am - 7pm
Sunday 11am - 7pm

Telephone

+13174084272

Alerts

Be the first to know and let us send you an email when Southside Machine Performance The Original Automotive Suspension Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share