Hebert Powersports LLC

Call Directions

Hebert Powersports LLC for all of your atv lifts/accessories and diagnosis/repair. Specializing in custom atv/utv builds! https://ebay.us/m/YsJi4c

Give our Ebay store a follow and check out our used part selection!

‼️We have a Super ATV 2026+ new body style pioneer 1000 flip out windshield IN STOCK‼️You don't have to wait for it to s...
10/18/2026

‼️We have a Super ATV 2026+ new body style pioneer 1000 flip out windshield IN STOCK‼️

You don't have to wait for it to ship, we have it here in store! Get it before its gone!!

One of a pair of custom engraved honda shadow 600 valve covers we finished up
10/18/2026

One of a pair of custom engraved honda shadow 600 valve covers we finished up

A custom engraved motorcycle tank trim we finished up this week 🔥"Go west young man, haven't you been told?"
10/18/2026

A custom engraved motorcycle tank trim we finished up this week 🔥

"Go west young man, haven't you been told?"

A custom engraved motorcycle pulley we did this week 🔥
10/18/2026

A custom engraved motorcycle pulley we did this week 🔥

This rancher 420 came in with severe smoking and engine rattle. Inspection revealed mud present in the engine oil, as we...
10/18/2026

This rancher 420 came in with severe smoking and engine rattle. Inspection revealed mud present in the engine oil, as well as several siliconed and spray painted holes in the main engine case caused by someone installing the wrong length front case bolts. Removal and disassembly revealed severe cylinder and piston wear as well as rotational play in the piston. Once the top end assembly was removed excessive rod bearing play was found, likely due to the oil pump screen being installed sideways, and completely plugged with mud, grass, silicone and metal shavings. Further inspection also revealed a severely worn timing chain and a damaged 4th gear and shift fork. After replacing both main engine cases, all bearings and seals, the crankshaft, 4th gear & shift fork, timing chain and the complete top end assembly we confirmed that the engine runs and shifts just as it did when it was new. We then went on to replace the throttle cable and both front wheel bearings before returning it to the customer ready to hit the mud!

As always, from our family to yours, thank you for your business and continued support!

This customer brought in his foreman for a list of repairs! He had us install a new OEM honda top end assembly, a new ti...
10/18/2026

This customer brought in his foreman for a list of repairs! He had us install a new OEM honda top end assembly, a new timing chain, a full set of clutches, a reduction boss gear reduction, a new rear differential and axle shaft, and replace a broken swing arm and upper motor mount. After we got everything replaced we returned it to the customer ready to ride!

As always, from our family to yours, thank you for your business and continued support!

This old honda came in with a home made gasket that was off center and leaking. We laser cut a new one on the spot and h...
10/15/2026

This old honda came in with a home made gasket that was off center and leaking. We laser cut a new one on the spot and had it out the same day instead of waiting for a new one to come in🔥

If there is a specialty tool to own, we want to own it!

A set of custom embossed levers for a good buddies harley we knocked out during lunch!
10/07/2026

A set of custom embossed levers for a good buddies harley we knocked out during lunch!

This customer brought in his honda rubicon for an intermittent misfire/stalling concern. Diagnosis reavealed a cracked s...
10/03/2026

This customer brought in his honda rubicon for an intermittent misfire/stalling concern. Diagnosis reavealed a cracked spark plug that was arcing when the engine was warm, leading to the misfire and stalling. We installed a new NGK spark plug and confirmed the issue was no longer present. We then returned it to the customer ready to ride!

As always, from our family to yours, thank you for your business and continued support!

This customer brought in his ranger 1000 for a popping sound when turning as well as hard shifting and creeping forward ...
10/03/2026

This customer brought in his ranger 1000 for a popping sound when turning as well as hard shifting and creeping forward while at idle. Inspection revealed 3 torn axle boots that were popping and binding, as well as a worn belt and sticking primary clutch. We installed 3 new ArmorTech ATV Parts HD axles and a new GILOMEN INNOVATIONS pro clutch, as well as a Super ATV gboost belt. After properly aligning the clutch we took it for a quick test drive and confirmed it shifted and drove just as it did the day it left the showroom!

As always, from our family to yours, thank you for your business and continued support!

Address

202 N Cushing Avenue
Kaplan, LA
70548

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Telephone

+13373930023

Website

Alerts

Be the first to know and let us send you an email when Hebert Powersports LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services


Other Automotive repair in Kaplan

Show All