Kugel Komponents

Call Directions Website

Kugel Komponents street rod parts manufacturers

This is a   Tuesday, in April 2015! Our 1964 Galaxie with an original 427 SOHC CAMMER! No Chevy LS can sound this good (...
10/27/2026

This is a Tuesday, in April 2015!
Our 1964 Galaxie with an original 427 SOHC CAMMER!

No Chevy LS can sound this good (prove me wrong)
Our good friends Bob and Kent Matranga had to have it, and it couldn’t have gone to better hands than them!! Matranga Hot Rods along with Mick’sPaint Ron Mangus they did an incredible job of doing a total rebuild of it. Looks the same (thank God) but waaaaay different from when they got it, with Chris Brown touches 👌
Gotta be one of the best street driven 64 Galaxies out there, and yes they drive it!!

Now this is too cool! Jim Green’s “THE ASSASSIN” is alive and well at this weekends NHRA Reunion in Bakersfield Ca. NHRA...
10/23/2026

Now this is too cool! Jim Green’s “THE ASSASSIN” is alive and well at this weekends NHRA Reunion in Bakersfield Ca. NHRA and also is rocking with a Jim Green belt driven SOHC CAMMER!

Joel Swanson (current owner) contacted me for a set of polished aluminum 427 SOHC covers, I said no problem I have them in stock. He also said “I’ll be cutting them up” WHAT!?!? as I have Jim’s belt drive SOHC engine. OH WOW!!
Too cool! He sent me these pics from Bakersfield, and I believe it’s the only cackle car with a Ford SOHC CAMMER! Thanks Joel you’re a hero in my book.
fordcammer

We have Rick’s 36 Ford for sale on Bring a Trailer right now and after one day it’s at $55k. Full Kugel independent susp...
10/13/2026

We have Rick’s 36 Ford for sale on Bring a Trailer right now and after one day it’s at $55k. Full Kugel independent suspension chassis we built. A complete 4 year build on this with lots of help from guys like Kev Elliott(sheet metal work) and Vinnie jv_enterprises with the paint and upholstery wiring work.
392” Hemi with aluminum Hot Heads intake and heads.
Check out the listing with a bunch of pics and basically all invoices. Over a $300k build!
A super nice great driving hot rod ready for the next caretaker!!

Another batch of FE exhaust manifolds are back in stock! These fit 60-64 Galaxies and Mercury. Ford pickup trucks with a...
10/11/2026

Another batch of FE exhaust manifolds are back in stock!
These fit 60-64 Galaxies and Mercury. Ford pickup trucks with a slight mod to the passenger side frame rail.
Still at $850 a set, coated with a high temp 1200 deg cast iron paint, and also available is a collector kit, $39.95 and manifold gaskets $29.
Made in USA

We installed our fully polished stainless steel Kugel IFS and IRS system in this super nice '33 Ford Roadster. Putting s...
10/06/2026

We installed our fully polished stainless steel Kugel IFS and IRS system in this super nice '33 Ford Roadster. Putting some miles on it and dialing it in! Out with the old and in with the new.

Made in the USA 🇺🇸

Sold a set of my 2” investment cast stainless steel FE header flanges to my buddy Dave Dave S he’s building a twin turbo...
10/03/2026

Sold a set of my 2” investment cast stainless steel FE header flanges to my buddy Dave Dave S he’s building a twin turbo set up for his killer 61 Lincoln Continental. Can’t wait to see the end result! So stay tuned. Knowing him and his toys it’s gonna be killer!!

Throwbackthursday 1969, Dad with his buddy and partner Big Red Holmes (RIP) their newly built ‘27 modified roadster with...
09/24/2026

Throwbackthursday
1969, Dad with his buddy and partner Big Red Holmes (RIP) their newly built ‘27 modified roadster with a Ford 427 FE SOHC cammer, and with a newly developed Hilborn FI system, reached 250 mph!
r

Our Kugel C-10 bolt in IFS crossmember system. ‘63-‘87 C-10 pickup trucks, accepts any aftermarket control arms and coil...
09/21/2026

Our Kugel C-10 bolt in IFS crossmember system. ‘63-‘87 C-10 pickup trucks, accepts any aftermarket control arms and coil over kits. 2” of more gound clearance than stock crossmember and more engine pan clearance!
kugelkomponents.com for more info
Made in USA.

I’ve finally found (a somewhat affordable price) copper tubing to go ahead and make correct 427 SOHC spark plug tubes. I...
09/12/2026

I’ve finally found (a somewhat affordable price) copper tubing to go ahead and make correct 427 SOHC spark plug tubes. I’ve previously made them of aluminum, but now they’re just like the originals.
$230 a set of 8 with o-rings. Should have them in stock ready to ship in about a week or so, so let me know!
Made in USA
[email protected]

Address

451 Park Industrial Drive
La Habra, CA
90631

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 12pm
1pm - 5pm
Wednesday 8am - 12pm
1pm - 5pm
Thursday 8am - 5pm
Friday 8am - 12pm
1pm - 5pm

Telephone

+15626917006

Alerts

Be the first to know and let us send you an email when Kugel Komponents posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services