Clays AC and Auto Repair

06/05/2026

I shouldn’t be doing my own editing !!!

Any video editors? Following me drop me a DM.  and comment below when you do.

Share this!! Would be extremely helpful.

My profile is public I’d even be able to work with high school student students college students. I use Apple if that’s helpful.

06/03/2026

In order to Turbo charge an upcoming Saturn Vue J 35

This motor mount was one of the hurdles that I needed be to overcame , the factory mount is the super weak. And break all the time The factory motor mount was a terrible design Mine are exceptional.

My motor mount changes the Energy direction, putting all the 250 horse down to the ground immediately instead of losing it in reflection from the horizontal placement of the factory one.

This motor mount was not contemplated or engineered at all from the factory. I think they just took something off the shelf that they probably used in another GM vehicle so I redesigned it completely …. I know the original mount are extremely similar to the transmission mount that they use in the rear of them. Which is perfectly fine because of the way that the energy pushes in the center of the mountain and the way it’s directed…. But not for the main motor mount….

New Video coming soon !!!

The Clay Way complete mount available now . !!!

My original motor mount design bracket wasn’t suitable enough for multiplication. So I resigned it a little bit. I think it came out pretty darn good. What do y’all think? And what do you think of the new shirts? Should it be BJBF or BFBJ? I think it works either way…. But I would like to know what other people think.?

06/02/2026

I think this crime is almost more unbelievable than the crime against Colin and I don’t say that lightly watch out this is a rabbit hole,

The title is corny but what these police officers in this Mormon City are doing is the one of the worst crimes I’ve ever seen against a human in my life … they’re in a position of power .. but the guy shooting the video … well let me put you this way. He’s

Watch part two here right now! https://www.patreon.com/c/RecklessBenBuy our company merch! www.westealfromoldpeople.comFollow me on instagram ...

05/31/2026

Guaranteed the best Mechanic advice you’ll ever Hear . Sometimes the problem isn’t the scanner, the wiring, the computer, or the vehicle. If it ran before you touched it and doesn’t run after you’re done, start by looking at what changed. Four days of my life reminded me of that lesson.

mechanic advice, automotive diagnostics, car repair, auto repair, mechanic life, diagnostic tips, troubleshooting cars, automotive technician, diy mechanic, check the basics, no start diagnosis, car won’t start, professional mechanic, automotive troubleshooting, scanner tool, automotive repair tips, mechanic wisdom, shop life, wrenching, garage life, auto technician, repair mistakes, mechanic mistakes, vehicle diagnostics, working on cars, the clay way, youtube the clay way, automotive education, mechanic motivation, fixing cars

05/30/2026

So I took this Sprinter apart and when I put it back together, it would not run, but l've done this a couple of hundred times I've had issues in the past, but it's always something that I personally did wrong.
Something that I disturbed and never some kind of weird coincidence and I thought this was extremely good advice for anybody who wants to ever be a mechanic and as somebody who has worked on cars for 30 years it's just something you learn overtime and it would've been great to know a long time ago
Anyway, anyways, I greatly appreciate y'all watching. Please share this video with anyone that you know that tries to work on their own automobiles. It'll stay in the back of their mind, but it will come in so super handy when they've exhausted all efforts.

Sometimes the problem isn’t the scanner, the wiring, the computer, ...

05/28/2026

I’m a high school dropout…. But I Know

I was reading the normal blah blah blah I’m broke. I can’t afford? The Stuff I want, I must get everything right now Post …. I want everything everyone else has on the Internet this morning… so I commented ,

I’m a high school dropout, and I have no problem paying my bills. I’m definitely not a CEO.

But I do have a mindset.

I’ve gotten to the point where I can waste time commenting on posts like this because I always had something every rich person wants … something they could never buy no matter how much money they had.

Time.

And I try to use my Time to inspire and empower people NOT to worry about what other people have.

I don’t waste my time worrying about what others have that I go without.

Nobody is going to read one of these post or comments and suddenly hand you a pile of money because “you’re right.”

You can’t capitalize on being right.
You can’t pay your bills by being right.

And whether people like hearing it or not… if everybody had money, money wouldn’t be worth anything.

Remember the COVID checks?
Remember the inflation that followed?

A lot of people were given money they didn’t earn, and many wasted it because they never had to work for it.

So instead of worrying about what somebody else has… use your time to walk outside, look around, and figure out what YOU can do to become more independent and self-sufficient.

I’m not gonna God trip you, however…. but there’s a reason the Bible is the best selling book in all of human history.

When I found God on June 13, 2005, I didn’t ask Him to give me anything.

I asked Him to show me how to use the things I already had.

When I was saved, which is not the point of this comment I was 25 and relatively knew nothing….

Every single person reading this already possesses the ability to learn, adapt, grow, and become valuable.

The world already contains everything need for you to build value for yourself. Cure you of illness. And build anything you can possibly dream of.

Stop worrying about what others have that you don’t.

Instead, watch what they DO.

Even if you think they didn’t deserve it… they all started somewhere. And far more people started it at the bottom then they ever started at the top…. I’m living proof.

Don’t think like the next to them think like the first of you….

— Clay Rogers
YouTube The Clay Way

“If anyone else can do it, you can do it too.”

05/26/2026

https://www.facebook.com/share/r/1E91cXUtAh/?mibextid=wwXIfr

05/16/2026

Well, I was trying to Garner some sponsors for some upcoming videos …. Can you tell me what sponsors I was trying to grab? And this is a true video…

Today we put a Tekton ratchet to the test on a Mercedes Sprinter harmonic balancer bolt torqued to around 600 ft-lbs using a 4-foot cheater bar. A lot of people say cheap tools don’t belong around jobs like this… but results speak louder than opinions. Sometimes you just have to try it and see what happens.

Remember: If anybody else can do it, you can do it too.

Tekton, Tekton tools, Mercedes Sprinter, Sprinter harmonic balancer, OM642, harmonic balancer bolt, 600 foot pounds, 600 ft lb bolt, mechanic tools, diesel mechanic, tool test, ratchet torture test, cheater bar, Sprinter repair, Mercedes diesel, automotive repair, The Clay Way, budget tools, shop tools, tool review ​⁠ ​⁠ what would you like to do next?