AJC Welding

Directions Contact the business

AJC Welding Custom aluminum boat builds, Aluminum light bars, Welding and Fabrication

Skeg repair on a lower unit. Made my own piece since obviously the broken piece is in the water.
02/28/2024

Skeg repair on a lower unit. Made my own piece since obviously the broken piece is in the water.



No I did not grind those welds out, that’s how the customer received them! These are spoiler mounts for a Corvette. Lots...
08/29/2023

No I did not grind those welds out, that’s how the customer received them! These are spoiler mounts for a Corvette. Lots of money for some s**t welds. Wiped everything down and welded them up correctly. No way these would have lasted.




Got some cracks to fix! 18’ boat with a bunch of cracked ribs and cracked welds between the ribs and hull. Made up caps ...
07/25/2023

Got some cracks to fix! 18’ boat with a bunch of cracked ribs and cracked welds between the ribs and hull. Made up caps to put over the cracks and weld these in to brace them up.






Little job to relocate the hitch brackets on this disk to fit the tractor.
07/22/2023

Little job to relocate the hitch brackets on this disk to fit the tractor.



Grizzly Tracker with a ton of cracks, original transom braces on the floor were broken off the hull. I welded up some cr...
07/15/2023

Grizzly Tracker with a ton of cracks, original transom braces on the floor were broken off the hull. I welded up some cracks on the transom brace and then added more/better framing on the floor.







This was a fun project!
07/09/2023

This was a fun project!




Cracked up bow, was past the point of just welding the cracks so I make new pieces to go over the bow and am in the proc...
07/08/2023

Cracked up bow, was past the point of just welding the cracks so I make new pieces to go over the bow and am in the process of welding them in.







Basic front deck and floor for this little 14’ boat. Nothing better then a floor and deck when your trying to fish. ...
07/02/2023

Basic front deck and floor for this little 14’ boat. Nothing better then a floor and deck when your trying to fish.






Another boat done, brand new boat this time. Added a cleat to each corner, welded a plate on to enclose the console, mad...
05/21/2023

Another boat done, brand new boat this time. Added a cleat to each corner, welded a plate on to enclose the console, made a trot line winder mount, light bar built and installed. Also made a prop stick that’s adjustable and flips into the boat out of the way.







Address

Newark, DE
19711

Website

Alerts

Be the first to know and let us send you an email when AJC Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AJC Welding:

Shortcuts

Share

Category