Factory Edge

Factory Edge Factory Edge LLC consists of Craig and Ryan Wilson. Together they have been building race engines f Factory Edge is located in Phoenix and Tucson Arizona.

Craig and Ryan Wilson are motor enthusiasts that thrive off making more horsepower at an affordable rate. We offer many different motor packages that are tailored to the rider and his preference of powerband. Factory Edge has worked with multiple AMA pro racers, Top Amateurs, local racers and weekend warriors. Factory Edge is a one stop engine shop that everything is done in house from porting an

d polishing using a flowbench , crank rebuilds, complete cylinder head rebuilds, new valve seats (copper nickel) valve guide replacements, custom welding, custom machining, complete motor rebuilds.

Round 2 of Copperstate this Saturday night! We will be offering trackside support and will have Vp T4+ /T2+/u4.4 along w...
06/03/2026

Round 2 of Copperstate this Saturday night! We will be offering trackside support and will have Vp T4+ /T2+/u4.4 along with Renthal lock-ons/regular grips along with all fluids for your bike and more

Under the lights at ACP. 🔥Trackside support all night long — fuel, mapping, bike setup, and race support from gate drop ...
05/07/2026

Under the lights at ACP. 🔥
Trackside support all night long — fuel, mapping, bike setup, and race support from gate drop to the final moto.

We build. We support. You win.

Clean 19 Ktm 450XCF we remapped the stock Ecu. Got to say that was some nice gains ! We can do up to 2021 stock Ecu rema...
04/30/2026

Clean 19 Ktm 450XCF we remapped the stock Ecu. Got to say that was some nice gains ! We can do up to 2021 stock Ecu remaps

Beta 250 RR full engine rebuildđź‘Ť Top quality parts especially the transmissions and clutch đź’Ż
04/08/2026

Beta 250 RR full engine rebuildđź‘Ť Top quality parts especially the transmissions and clutch đź’Ż

Doesn’t get any closer than that from a massive failure! This is the lower rod bearing cage and this brings up a common ...
03/02/2026

Doesn’t get any closer than that from a massive failure! This is the lower rod bearing cage and this brings up a common question we receive about low ends. The crank was in spec side to side and no up and down play. We tore this crank apart 1)it had unknown amount of hours and 2) the high comp piston in it was just barely touching the head on the edges and side note Oem gaskets and no decking on cylinder or cylinder head so with higher rpm it was flexing up a bit to hit. So to finish sometimes the cranks spec out but can have issues and this is a good example of why it’s important to keep track of hours which also depends on the type of riding you do.

Who doesn’t love a v***r blasted/full engine rebuild ! ! 👀
02/27/2026

Who doesn’t love a v***r blasted/full engine rebuild ! ! 👀

1997 CR-500 full chassis teardown, powdercoated the frame/subframe/hubs 🔥🔥 We did all new chassis bearings , new spokes...
01/21/2026

1997 CR-500 full chassis teardown, powdercoated the frame/subframe/hubs 🔥🔥 We did all new chassis bearings , new spokes, rims and wheel bearings , new radiators , new engine bolts, new plastic bolts along with chassis parts that were v***r blasted! We do a lot more than just engines 👀

26 yz250 with all the goods đź’Ş
10/16/2025

26 yz250 with all the goods đź’Ş

bling for a cool project we have coming very soon for
10/15/2025

bling for a cool project we have coming very soon for

We are now selling VP T2+ T4+ and U4.4 ! We still have some Renegade left but are switching to VP
10/07/2025

We are now selling VP T2+ T4+ and U4.4 ! We still have some Renegade left but are switching to VP

Address

2127 W. Melinda Lane
Phoenix, AZ
85027

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+15202500949

Website

Alerts

Be the first to know and let us send you an email when Factory Edge posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Factory Edge:

Shortcuts

Featured

Share

Category