Dynamic Corvettes

07/22/2026

Our mold makers are hard at making your 68-72 short hood! L88 & Big Block is right around the corner!!

07/22/2026

can you spruce this up?

Our C3s look above and beyond what people expect. We've made ours deluxe so they just really stand out from the crowd.

Check out the video to see what all is included in our kit and how you can make your C3 different.

You can find this kit online at:
https://dynamiccorvettes.com/product/deluxe-interior-trim-coupe-68-77

07/22/2026

68-73 Exhaust panel bonding strip tooled from original NOS parts. The part is vacuum infused for a more consistent, lighter and stronger part. While the underside is not quite as smooth as a press molded or match molded part, we believe the benefits outweigh finish.

You can find this on our website here: https://dynamiccorvettes.com/product/quarter-panel-bonding-strips-press-molded-68-73/

07/21/2026

Get your orders in!

Are you heading to Carlisle? We are—and we’re bringing the trailer!

Place your order now, and we’ll deliver it to the event for free.

Trailer space is limited, so order soon to reserve your spot.

We can’t wait to see everyone there!

07/21/2026

F is for fitment.

A great Corvette build is not just about the big parts. It is about how everything lines up when the car comes together.

At Dynamic Corvettes, we care about helping these cars look as clean and intentional as possible, and that starts with proper fitment. Whether it is a major body panel or a smaller detail like this decklid, alignment matters.

Big or small, align it all.

Find the decklid here:
https://f.mtr.cool/phothfyjeb

07/21/2026

We've eliminated the metal bracket. Our fiberglass panel is made to tuck around and secures in with 2 mechanical fasteners. There's also a finished edge for display with top down.

You can find this on our website here: https://dynamiccorvettes.com/product/convertible-quarter-trim-set-68-76/

07/20/2026

Tooled from an original NOS floor, this is an early style floor with the deeper tool box pockets under the floor. The bottom of the floor is smooth with a class "A" finish. We use a vacuum infusion process to make this which gives you a lighter, stronger and more consistent product. This floor will fit a 67 but has no provisions for a parking brake.

You can find this on our website here: https://dynamiccorvettes.com/product/early-floor-63/

07/19/2026

Our 58-62 dash can be wrapped in leather or painted. This is available in fiberglass or carbon fiber.

You can find this on our website here: https://dynamiccorvettes.com/product/dash-58-62/

07/18/2026

Our header bar is made out of 12k carbon fiber which is 5 times stronger than steel. A metal header bar weighs 5 lbs and our header bar weighs 2.5 lbs.

You can find this on our website here: https://dynamiccorvettes.com/product/headlamp-reinforcement-header-bar-63-67/

07/18/2026

Infusion changes everything.

By controlling the resin content, we’re able to build a part that is approximately 25% lighter and 25% stronger compared to a resin rich layup. Less excess resin means less unnecessary weight, while the infusion process creates a cleaner, more consistent structure.

We also add carbon fiber for additional strength where it matters, giving the part a better strength to weight ratio without sacrificing quality or durability.

Since filming this video, we’ve upgraded to silicone bags for even better consistency throughout the process. The method is generally the same, but the control, repeatability, and final result keep getting better.

Better materials. Better process. Better parts.