Full Time Fabrication

Full Time Fabrication Custom fabrication, machine shop, and turn-key aluminum boat builder in Skagit Valley, WA.

06/05/2026

Crazy what you can do with a jet boat and a bow thruster! Dug up this cool little drone vid of the Bridgette Joy and Casi Jo from a while back, two 32’ Bristol Bay sternpicker sister ships we built at the shop. It’s been a few years but we’re ready to take on another one of these bad units and we have a sternpicker and double ender design ready to rock and roll. Good luck to all our Bristol Bay customers this season. Stay safe, make $, and let’s build a jet boat when ya get home! 🍻🇺🇸🦅

Wrangled up some photos of a cool little open cab 24’ x 8 1/2’ dive boat from way back. We’ve gotten a few inquiries abo...
06/03/2026

Wrangled up some photos of a cool little open cab 24’ x 8 1/2’ dive boat from way back. We’ve gotten a few inquiries about a similar platform and are currently working on getting one modeled up, should be a cool boat to have in our arsenal of shop models. We’ll offer this thing in 24’, 26’, and 28’. She would be a perfect platform for a dive boat, puget sound day crabber, or general work boat. Hit us up for any inquiries and we can send over some drawings/specs

Knocked out a pretty tech little roof mount generator install for a govt. contracted research boat. This was actually a ...
05/18/2026

Knocked out a pretty tech little roof mount generator install for a govt. contracted research boat. This was actually a bit of a head scratcher in the engineering department but we got her squared away and she’s ready to roll.

Big projects are keeping us plenty busy but we always try to make time the smaller jobs too so don’t hesitate to reach out for any boat work you need done for the upcoming season and we’ll see what we can do to make it happen

We have an 18’ x 6’ flat bottom tunnel jet hull for sale. Rigged and ready for motor on a new trailer. Hit us up for det...
05/04/2026

We have an 18’ x 6’ flat bottom tunnel jet hull for sale. Rigged and ready for motor on a new trailer. Hit us up for details or feel free to come by the shop and check this thing out!

Got a couple sneak peak shots of the 20’  cat. We’re pulling out all the stops on this one, she’s a work of art. We’re j...
04/30/2026

Got a couple sneak peak shots of the 20’ cat. We’re pulling out all the stops on this one, she’s a work of art. We’re just finishing up the trim and some detail work, then we’re on to windshield and , graphics, and wrapping up the rigging. Hoping to hit the water towards the end of May so stay tuned, she’s gonna be a head turner!

And if anyone’s in the market for a custom aluminum speedboat, that’s another avenue we’re going down these days so feel free to reach out for any inquiries

Quick little powder coated awning job, turned out sweet! We got a reputation for being more of a boat shop these days bu...
04/21/2026

Quick little powder coated awning job, turned out sweet! We got a reputation for being more of a boat shop these days but we build just about anything so don’t hesitate to hit us up with any of your projects or ideas, we can most likely make em happen

Knocked out a cool little tophouse job for a Bristol bay Gillnetter just in time for the barge. The customer sent us ove...
04/14/2026

Knocked out a cool little tophouse job for a Bristol bay Gillnetter just in time for the barge. The customer sent us over a pile of photos and roof measurements from his current flybridge boat. From there we did a quick model of the boat, added the tophouse and got approval, and got her done. Anyone thinking of adding a tophouse to your bay boat, we’re your shop. Just get some good photos and dimensions and get with us after the season and we’ll get ya taken care of.

We just got the 20’ cat speedboat for  pulled out of the paintbooth and gave her a good buff job and god damn she looks ...
03/31/2026

We just got the 20’ cat speedboat for pulled out of the paintbooth and gave her a good buff job and god damn she looks sharp! Moving her into rigging next, everyone’s favorite part. Shes gonna turn some heads this summer



The guys knocked out a little hardback with slider door on this weldcraft to replace the old worn out canvas. The custom...
03/25/2026

The guys knocked out a little hardback with slider door on this weldcraft to replace the old worn out canvas. The customer was having a pretty bad rodent problem in the winter so we kept the fits tight and made curtain plates around all the nooks and crannies and got her all sealed up.

The small jobs have been finding us as fast as we can get them done but we’ve been making good progress on the cat and just started out in-house design 35’ sport boat so we have some cool new construction starting to take shape. Progress pics coming soon

Fresh round of bait choppers wrapped up. 2 standard models, and a custom edition where we changed the size, motor side, ...
03/23/2026

Fresh round of bait choppers wrapped up. 2 standard models, and a custom edition where we changed the size, motor side, and went with stainless bearings. Got two sold but have one available if anyone’s in the market hit us up!

Address

605 Sunset Park Drive Suite S
Sedro-Woolley, WA
98284

Opening Hours

Monday 7am - 5:30pm
Tuesday 7am - 5:30pm
Wednesday 7am - 5:30pm
Thursday 7am - 5:30pm

Alerts

Be the first to know and let us send you an email when Full Time Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Full Time Fabrication:

Share