What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm

Chuck's Auto Repair - Shoreline

Home
United States
Shoreline, WA
Chuck's Auto Repair - Shoreline

Call Directions Website

KEEPING OUR NEIGHBORS ON THE ROAD Chuck's Auto Repair is a neighborhood auto repair shop that has expanded to its second location in Shoreline.

We have been serving the Maple Leaf Community for over 30 years. We strive to provide quality service at an affordable price.

10/26/2026

Catalytic converter theft has not gone away.

This Toyota Sequoia came to our Shoreline shop after both front catalytic converters had been cut out and stolen.

And the converters were not the only things missing.

One downstream oxygen sensor had disappeared with them.

That is one reason converter theft can become such an expensive repair. Thieves are trying to remove parts quickly, not carefully disassemble the exhaust system.

Depending on the vehicle, the damage can involve converters, oxygen sensors, cut pipes, wiring, hardware and additional exhaust work.

There are ways to make theft harder, including converter shields or cages, alarms, marking the converter and choosing more visible parking when possible.

None is a guarantee.

The goal is to make the vehicle a more difficult target.

Read the full story:

Catalytic Converter Theft in Shoreline: What Happened to This Toyota Sequoia

https://autorepairshoreline.com/2026/10/catalytic-converter-theft-shoreline-toyota-sequoia/

10/19/2026

This Nissan Xterra developed a significant rear end noise.

When the differential was opened, the magnetic drain plug told us something was going on inside.

It was covered in metallic debris.

The ring gear also showed visible pitting, and the technician identified noise consistent with a failing rear pinion bearing.

The Xterra was transferred to Chuck’s Auto Repair – Shoreline for the major repair, where Mark’s decades of differential experience came into play.

The final repair used a complete new Nissan rear axle housing and differential assembly.

The photos tell the story pretty clearly.

Noise.

Metal.

Internal damage.

Major repair.

Read the full story:

Metal in the Differential: Diagnosing Rear End Noise on a Nissan Xterra

https://autorepairshoreline.com/2026/10/nissan-xterra-rear-differential-noise-repair/

10/12/2026

This Acura TSX was running very rough.

The scan showed a cylinder 4 misfire plus P0420.

The important part was deciding what to test first.

The technician moved the ignition coil from cylinder 4 to cylinder 1.

The misfire moved with the coil.

That gave us a clear direction.

The ignition problem was repaired first instead of assuming P0420 automatically meant the catalytic converter needed replacement.

That is why a scan code is only the beginning.

Testing tells you what the vehicle actually needs.

Read the full article:

Acura TSX Running Rough with P0420: Why We Fixed the Misfire First

https://autorepairshoreline.com/2026/10/acura-tsx-p0420-misfire-diagnosis/

10/04/2026

A sinking brake pedal does not automatically tell you which brake part has failed.
On this 2010 Chrysler Town & Country, the pedal was fading toward the floor under steady pressure.
Testing found very dirty brake fluid and no external brake-fluid leak.
The master cylinder, however, was not operating properly.
After the master cylinder was replaced, the system could build pressure again. During bleeding, another abnormal rear-brake condition became apparent.
The front brakes also had significant wear, including peeling pad material and rotor discoloration documented during the inspection.
That is why brake diagnosis can happen in stages.
The symptom tells us where to start. Testing tells us what is actually wrong. Retesting tells us what happens next.
Read the complete story:
Brake Pedal Fading to the Floor: Diagnosing a 2010 Chrysler Town & Country

https://autorepairshoreline.com/2026/10/chrysler-town-country-brake-pedal-goes-to-floor/

09/25/2026

Your car has no idea it's fall.
There's no September switch inside it.
What changes are the conditions around it.
Cooler mornings can expose a battery that was already getting weak.
Falling temperatures can change tire pressure.
Rain makes actual tread depth much more relevant.
Darker, wetter commutes make it a good time to know what condition your brakes are in.
And your cooling system still has a job to do long after summer is over.
That's why we don't think fall maintenance should mean replacing a bunch of things just because the calendar changed.
We'd rather test the battery.
Measure the tires.
Inspect the brakes.
Look over the cooling system.
Check the vehicle's service history.
Then decide what it actually needs.
We put together a new article explaining what really changes when Seattle weather turns cold and wet:
Your Car Doesn't Know It's Fall. Here's What Actually Changes When Seattle Weather Turns Cold and Wet

https://autorepairshoreline.com/2026/09/seattle-fall-car-maintenance-cold-wet-weather/

And through November 30, our Shoreline location is running a $149 Fall Service Package that includes an oil change and filter, tire rotation, cooling-system inspection, vehicle inspection and battery test.
Use code FALL149.
We also have $75 off a set of four eligible tires with code TIRE75.
Details and restrictions apply.
Chuck's Auto Repair – Shoreline
14501 15th Ave NE
Shoreline, WA 98155
206-368-0980

09/21/2026

When someone hears “clutch replacement,” they usually picture one worn clutch disc.
This MINI Countryman S ALL4 tells a different story.
During the road test, the clutch engagement position showed wear consistent with a system that was ready for replacement.
Then the real work started.
The transmission had to be removed before the clutch could even be reached.
The repair included:
Clutch disc
Pressure plate
Release bearing
Dual-mass flywheel
The manual-transmission fluid was also serviced while everything was apart.
And there was another interesting detail:
The vehicle had previously been suspected of having an oil leak near the rear-main area.
Our technician found the underside dry.
The seal wasn't being replaced because we confirmed an active leak — it was addressed while transmission access was already available.
That's an important distinction.
Our newest article walks through the entire repair with the actual Shoreline shop photos:
MINI Countryman S ALL4 Clutch Repair: Why It’s More Than Just a Clutch Disc

https://autorepairshoreline.com/2026/09/mini-countryman-all4-clutch-dual-mass-flywheel/

09/14/2026

P0300 — Engine Misfire Detected.

Sounds like a “random misfire.”

But the live data on this Chevy Silverado wasn't random at all.

This 2007 Silverado 5.3L had more than 265,000 miles when it came into our Shoreline shop with the check-engine light on.

When we watched the live misfire counters, cylinders #5 and #6 were consistently misfiring together.

That changed the diagnosis.

Instead of immediately throwing plugs, coils or other ignition parts at it, the technician moved into mechanical testing.

The valve cover eventually came off.

That's where the physical problem became clear:

the #6 exhaust-side rocker was frozen, and the exhaust valve wasn't moving.

The repair decision ultimately became an engine replacement.

And these are the real pictures from that repair — from the original code scan all the way to the replacement long block.

The key lesson:

P0300 identified a misfire.

Diagnosis identified why.

Read the full real-repair story:

Chevy Silverado P0300: When a “Random Misfire” Isn’t Random at All here:

https://autorepairshoreline.com/2026/09/chevy-silverado-p0300-random-misfire-diagnosis/

09/08/2026

Imagine getting onto the freeway, stepping on the accelerator and suddenly your Jeep doesn't want to keep accelerating.

That's the complaint that brought this 2012 Jeep Grand Cherokee 3.6L into our Shoreline shop.

The interesting part?

It only happened when the engine was cold.

Our technician reproduced it multiple times.

The scan showed:

P06DD — Engine Oil Pressure Control Circuit Stuck Off

We cleared the fault and drove the Jeep cold again.

The power-loss symptom returned.

And P06DD returned with it.

But even then, we didn't automatically jump from:

P06DD → new oil pump

The repair process first addressed the oil-pressure-control/switch side of the system before ultimately progressing to the much more involved oil pump and oil-pump solenoid replacement.

And these photos show just how involved that repair became.

That's the point of our newest article:

A trouble code is evidence. It isn't the entire diagnosis.

Read the real repair story:

Jeep Grand Cherokee P06DD: How an Oil Pressure Control Fault Led to an Oil Pump Repair

https://autorepairshoreline.com/2026/09/eep-grand-cherokee-p06dd-oil-pump-solenoid/

08/31/2026

When someone says:

“My F-150 needs a timing chain.”

it's easy to picture one chain coming off and another one going on.

A major 3.5L EcoBoost timing-system repair can be considerably more involved.

We recently completed one on a real 2019 Ford F-150 at Chuck’s Auto Repair – Shoreline.

The job involved the timing-chain system along with multiple camshaft-timing components and the parts needed to open, reseal and service the engine correctly.

There's another interesting part to this repair.

The owner also elected to replace the water pump while the larger engine repair was already underway.

The water pump wasn't being presented as the cause of the timing-system problem. The owner made the decision to take advantage of overlapping labor and reduce the chance of another separate period of vehicle downtime later.

That's the kind of conversation we think makes sense during a major repair:

What is required?

What does inspection show?

Is there anything optional that makes practical sense while access overlaps?

You don't have to research the timing system yourself.

We'll check your exact year and model and explain what applies.

We put together a new article using this real F-150 repair to show what actually goes into a 3.5 EcoBoost timing-system job.

https://autorepairshoreline.com/2026/08/ford-f150-35-ecoboost-timing-system-repair/

08/22/2026

Your Ford Transit makes a nasty clacking or grinding noise when you start it in the morning.

Then it warms up.

The noise fades.

And you've got an electrical or HVAC service schedule already stacked for the day.

So the van goes back to work.

We understand why that's easy to put off.

We've been seeing more Transit owners bring this type of cold-start engine-noise concern into our Shoreline shop.

One recent example was a 2019 Transit 250 with just over 76,000 miles. The owner described grinding or clacking when the engine was cold that dissipated as it warmed.

We confirmed the noise and localized it to the timing-cover area. The resulting repair required replacement of the timing-chain system and all four VVT camshaft sprockets.

That does not mean every Transit with a cold-start rattle needs timing work.

It means this:

A noise that goes away warm is still a symptom.

And if that van carries your tools, parts and equipment to every job, knowing what you're dealing with gives you a chance to plan around the repair rather than guess.

Planned downtime is inconvenient. Unplanned downtime usually gives you fewer choices.

Read our new article for the full story.

Chuck's Auto Repair – Shoreline
206-368-0980

Address

14501 15th Avenue NE
Shoreline, WA
98155

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm

Telephone

+12063680980

Website

http://www.autorepairshoreline.com/

Alerts

Be the first to know and let us send you an email when Chuck's Auto Repair - Shoreline posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.