Frisco Hill Auto

06/05/2026

Thank you again to Bob who brought us his sweet 55 Chevy for a little paint repair and some mechanical work. Glad the car is back with you and your enjoying the cruising!

06/04/2026

The team is continually moving ahead on Joe's awesome 1966 Chevelle! The front end is now installed and looks great. The team will be working on installing the rest of the trim today and getting it ready to take over to the Mechanical side of things to get the engine up and running. Stay tuned!

06/04/2026

Jeff's 68 Corvette has been disassemblied and put back together with a new drivetrain, suspension, brakes and a completly restored chassis.

06/03/2026

David's 1967 Lincoln is painted and is now in to the clean booth for Scott and Tyler to start the meticulous process of block sanding the Revolt Auto Paint to create the beautiful, "glass-like" finish a proper show car should have. Scott will block sand all the surfaces using a step up in sandpaper grits, from 1000g up to 8000 grit and a DA sander. Once this is accomplished, the polishing starts, and a 3 stage polishing process begins. Similar to the sanding, each stage involves a lighter grit! Wet sanding the paint to such a fine grit also keeps the buffer on the paint to a minimum and decreases heat the paint is exposed to.

06/03/2026

06/02/2026

Gerry's Karmann (lil Funshine) is in the booth this week to get the exterior painted! Joe has got it all masked up and is about ready to start laying down the color. We are looking forward to seeing it yellow.

05/29/2026

Chris's 1970 Delta 88 is a big focus this week as we try to get it ready for its big trip to Hot Rod Power Tour. This is a several day planned cruise organized by Hot Rod magazine. The bottom of the car was stripped, cleaned and undercoated with bedliner. Chris has prepared a new frame over the past few months and it has now been mated. Brad is busy welding a new Stainless exhaust together, and we are looking forward to hearing it!

05/28/2026

Jerry's 1970 Olds Cutlass is a beautiful car. Restored sometime ago, he has decided to repaint the car due to the fact that the color shade is wrong, and he would like it painted in the correct color. So the team has already disassembled the car and is now stripping the paint from it and is preparing to start the body work for a repaint in the correct color Gold.

05/28/2026

The crew is back on Joe's 1966 Chevelle. Stephen has been working on the electric harnesses for the interior and the stereo. The headers arrive from and look great. They have been installed on the car. The new headers will actually allow him to remove the oil filter without any interference from the header, unlike the last builders setup! Now that the headers are installed the front end should be going on soon!

05/28/2026

I wanted to say thank you to Bob and Cindy for allowing us to create and build the new interior in your truck. We hope you enjoy it and have many miles of comfort!