Case House Performance

Call Directions Website Contact the business

Case House Performance LS & LT engine modification and drivetrain specialists. In house engine machine shop. Ignite Racing Fuel authorized dealers

10/23/2026

Our buddies at Burger 25 are doing their cars and coffee this Sunday. Its for a great cause for Donnys wife from ASC. We are proud to be sponsors again for this event and we will be there with some customers cars on display. Come out and enjoy the day with us.

10/22/2026

This week Paul got his C7 back after we did quite the makeover. Paul has a C7 Stingray and after his original LT1 was hurt we did a full build with a 2650.

Thompson Motorsports 416
Magnuson Superchargers 2650
DSX Tuning low side
Cordes performance racing cooling package with trunk tank and 5" intake
Harding Performance valve covers
Full LT4 high side
Monster Clutches S series triple
MGW Shifters
TooHighPsi Engineering INC lid

This whole setup equals our CHP750 package. However, Paul is going to make the jump to the Dsx Atlas with supporting mods over the winter here. We gave him our CHP1000 badges in anticipation. This is quite the package and makes for an all around fun car with awesome power for the street.

10/19/2026

This is Jims LS2 C6 vert. When Jim brought us his car it was a stock car with the ECS 1500 kit and a fuel pump booster. We added quite a bit to help wake this car up. 1st was ditching the pump booster since everyone knows they dont work anyway.

DSX Tuning aux fuel pump
Brian Tooley Racing cam package, stage 2 cam
FID 1000 injectors
Kooks Headers and Exhaust 2" LTH and xpipe
Mightymouse Solutions c6 wild catch can

We also took care of a few maintenance items as well. Now Jims C6 sounds as good as she looks and can perform just as well. RKTuning playing the puppet master on the ecu as always.

Work has begun on Jeromes 16 Yukon XL. We did a small diag and pulled out the motor. Upon teardown, he had a total of ...
10/15/2026

Work has begun on Jeromes 16 Yukon XL. We did a small diag and pulled out the motor. Upon teardown, he had a total of 4 bad lifters, 1 separated into 2 pieces once the pushrod was out. We are going to move forward with a bottom end refresh through our in house machine shop. Clean up the heads and a full Dod/afm delete this way this issue is never going to happen again.

10/07/2026

Another car we finished up last week is Mikes, aka Camaro Mans 16 Camaro SS. Yes this car started life as a SS camaro, now it is a natural hp behemoth. Well into 4 digit hp, we built this car to make hp and it does just that. RKTuning is always taking care of this gem. Just about everything on this car is DSX Tuning somewhere including the Atlas and Titan grip for boost control. Mikes lower pulley is a custom made 10 rib 11.5" lower from DSX built especially for this car. Mikes got the record at Racemotive for the fastest 6th gen Camaro, maybe all camaros, of 171mph. All through a manual 6 speed trans. Mike always joins us at the pocono events where he raises hell to praise Dale. America!!!!!!!

10/06/2026

Another car we finished up last week is Jon's C7 GS. All i can say about this car is it woke up and chose violence. A huge build that has taken time to come around. When this build 1st started we battled poorly built engines at first, then shotty port systems, ECU problems from the previous shop and finally we are on the other side of all that. Jon wanted to build his car identically to Joe Cordes own C7. Special thank you to Joe for the questions we had in finishing this car, Joe's a Rock star. Also special thanx to Rob from RPS clutches as we needed a clutch to hold this power in a pinch. This car has a LME built LTR 427 with a F1X procharger, Dsx Atlas port system, RPS triple carbon clutch and all the other bells and whistles. This build also qualifies for a newly developed chp1200 badges, Jons been wanting this done for a long time and I know he couldn't be happier.

10/05/2026

What a crazy week leading up to RACEMOTIVE over the weekend. Started last week with needing to get a new turbo from Forced Inductions . Then last sunday renting some dyno time with the awesome guys at Kessel’s Tuning . Had to cut it short as a fuel pump failed on the dyno. Got the pump replaced last week and was able to get an emergency hub rental so we can finish tuning at Kessels. We started the day at pocono on low boost with plans to creep up to full boost. 20psi we did 175mph, 30psi we did 184 and then boom it rained and they closed out the track. We never got to test full boost even though the conditions were perfect for it. We all think 189 or 190mph was going to happen for us. Anyway, theres always next year. For now we still hold the record for the fastest corvette RACEMOTIVE with a 188mph. Thank you to all the unsung heros who helped get us ready for the event.

Check out the shop car page for some in car videos

Kessel’s Tuning
RKTuning
Joe LaBruzza
Optic Auto Studio
igniteracingfuel
shop car

Evans C8 Z06 literally checks all the boxes. Awesome color, carbon package, aero package but he was looking for just a ...
10/03/2026

Evans C8 Z06 literally checks all the boxes. Awesome color, carbon package, aero package but he was looking for just a little bit more. We went with the Eventuri intake and the AWE switch path exhaust. This thing screammmsssssss plus still is able to switch the exhaust between quiet and loud modes. Our tech Robbie killed it with the install. Special thanx to our buddies RM tires for taking care of the tire install while we performed surgery.

Check out our story at the top to hear this Z06 exhaust scream.

10/01/2026

Enjoy this walk around clip of Vinces F1A94 powered c6z. There is nothing more vicious on the street and track. We are truly proud of setups like this. (If you cant tell) Hes also wearing our new chp packaged badges. As always RKTuning is the mastermind making sure this setup does exactly what it needs to do. Catch Vince at Pocono this weekend. Its going to be an exciting weekend.

Over the weekend in the midst of the nor'easter we finished up Nathan's 15 silverado. We did a simple AFM delete, every...
09/29/2026

Over the weekend in the midst of the nor'easter we finished up Nathan's 15 silverado. We did a simple AFM delete, everything on this truck was stock and it is the family vehicle so no aftermarket cam on this 1. We did a simple OE replacement cam, stock manifolds, stock exhaust, full AFM delete. It runs and drives like a stock truck again just without the ticking time bomb lifters. Just in time for the family to go on a road trip with it.

We do more DOD/AFM/DFM deletes than any other shop in NJ. If your concerned with getting the lifters taken care of on your late model truck before it takes out your motor, feel free to reach out to us to discuss options.

☎️ 732-569-6294
📨 [email protected]

Address

1400 Industrial Way N Unit 1
Toms River, NJ
08755

Telephone

+17325696294

Website

Alerts

Be the first to know and let us send you an email when Case House Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Case House Performance:

Shortcuts

Share

Category